杜鹏, 闫晓东, 李彦利, 等. 6061 铝合金中富铁相在均匀化过程中的相变机理[J]. 中国有色金属学报, 2011, 21(5):981-987.DU P, YAN X D, LI Y L, et al. Transformation mechanism of iron-rich phase in 6061 aluminum alloy during homogenization[J]. The Chinese Journal of Nonferrous Metals, 2011, 21(5):981-987.
[2]
LEE D H, NAM S W. Role of Mn-dispersoid in the fracture toughness enhancement of Al-Zn-Mg-(Mn) alloys[J]. Metals and Materials International, 1995, 1(1):71-76.
[3]
PANIGRAHI S K, JAYAGANTHAN R. Development of ultrafine grained Al-Mg-Si alloy with enhanced strength and ductility[J]. Journal of Alloys and Compounds, 2009, 470(1):285-288.
[4]
ONURLU S, TEKIN A. Effect of heat treatment on the insoluble intermetallic phases present in an AA6063 alloy[J]. Journal of Materials Science, 1994, 29(6):1652-1655.
[5]
LODGAARD L, RYUM N. Precipitation of chromium containing dispersoids in Al-Mg-Si alloys[J]. Materials Science and Technology, 2000, 16(6):599-604.
[6]
LIU H, ZHAO G, LIU C M, et al. Effects of magnesium content on phase constituents of Al-Mg-Si-Cu alloys[J]. Transactions of Nonferrous Metals Society of China, 2006, 16(2):376-381.
[7]
刘宏, 刘艳华, 赵刚, 等. Mn对Al-Mg-Si-Cu铝合金结晶相的影响[J]. 中国有色金属学报, 2004, 14(11):1906-1911. LIU H, LIU Y H, ZHAO G, et al. Effects of manganese content on phase constituents of Al-Mg-Si-Cu alloys[J]. The Chinese Journal of Nonferrous Metals, 2004, 14(11):1906-1911.
[8]
PARK D S, NAM S W. Effects of manganese dispersoid on the mechanical properties in Al-Zn-Mg alloys[J]. Journal of Materials Science, 1995, 30(5):1313-1320.
[9]
LODGAARD L, RYUM N. Precipitation of dispersoids containing Mn and Cr in Al-Mg-Si alloys[J]. Materials Science and Engineering:A, 2000, 283(1-2):144-152.
[10]
JENISKI R A. Effects of Cr addition on the microstructure and mechanical behavior of 6061-T6 continuously cast and rolled redraw rod[J]. Materials Science and Engineering:A, 1997, 237(1-2):52-64.
[11]
EISAABADI B G, DAVAMI P, KIM S K, et al. Effect of oxide films, inclusions and Fe on reproducibility of tensile properties in cast Al-Si-Mg alloys: statistical and image analysis[J]. Materials Science and Engineering:A, 2012, 558:134-143.
[12]
何立子, 陈彦博, 崔建忠. 均匀化对 Al-Mg-Si-Cu 合金组织和性能的影响[J]. 稀有金属材料与工程, 2008, 37(9):1637-1641.HE L Z, CHEN Y B, CUI J Z. Effects of homogenization on microstructure and properties of Al-Mg-Si-Cu alloy[J]. Rare Metal Materials and Engineering, 2008, 37(9):1637-1641.
[13]
张洪梅, 苏玉洁, 黄桂杰, 等. 6061-T6铝合金棒材尾端中心大晶粒的研究[J]. 轻合金加工技术, 2005, 33(8):34-39.ZHANG H M, SU Y J, HUANG G J, et al. Study on 6061-T6 rod centre large grain of aluminium alloy[J]. Light Alloy Fabrication Technology, 2005, 33(8):34-39.
[14]
文方, 李铁. 2A02铝合金挤压棒材粗晶环的消除方法[J]. 轻合金加工技术, 2003, 31(3):33-38.WEN F, LI T. Extrusion methods to eliminate the bar coarse grain ring of 2A02 aluminum alloy[J]. Light Alloy Fabrication Technology, 2003, 31(3):33-38.
[15]
SHABEST S G, MAHMUDI T, EMAMY M, et al. Effect of Mn and Sr on intermetallics in Fe-rich eutectic Al-Si alloy[J]. International Journal of Cast Metals Research, 2002, 15(1):17-24.
[16]
贺永东, 张新明. 微量Cr、Mn、Ti、Zr细化7A55铝合金铸锭组织的效果与机理[J]. 中国有色金属学报, 2005, 15(10):1594-1601.HE Y D, ZHANG X M. Refinement mechanism of trace Cr, Mn, Ti and Zr as cast 7A55 alloys[J]. The Chinese Journal of Nonferrous Metals, 2005, 15(10):1594-1601.
