王再宙, 王忠良, 任露泉, 等. 仿生非光滑表面磨损机理的试验研究[J]. 材料科学与工艺, 2006, (3):275-279.WANG Zai-zhou, WANG Zhong-liang, REN Lu-quan, et al. Experiment research on wear mechanism with bionic non-smoothed surface[J]. Materials Science and Technology, 2006, (3):275-279.
[2]
KARNIADAKIS G E. Mechanisms on transverse motions in turbulent wall flows[J].Annual Review of Fluid Mechanics, 2003, 35:45-62.
[3]
佟金, 荣宝军, 马云海, 等. 仿生棱纹几何结构表面的土壤磨料磨损[J]. 摩擦学学报, 2008, 28(3):193-197. TONG Jin, RONG Bao-jun, MA Yun-hai, et al. Abrasive wear of the biomimetic ridge surfaces against soil[J].Tribology, 2008, 28(3):193-197.
[4]
杨卓娟, 韩志武, 任露泉. 激光处理凹坑形仿生非光滑表面试件的高温摩擦磨损特性研究[J].摩擦学学报, 2005, 25(4):374-376. YANG Zhuo-juan, HAN Zhi-wu, REN Lu-quan. Friction and wear behavior of bionic non-smooth surface at high temperature[J].Tribology, 2005, 25(4):374-376.
[5]
MICHAEL J W. Riblets as a viscous drag reduction technique[J]. American Institute of Aeronautics and Astronautics, 1983, 21(4):485-486.
[6]
董立春, 韩志武, 吕尤, 等. 凹坑型仿生形态环块样件耐磨性能[J]. 吉林大学学报:工学版, 2011, 41(6):1659-1663. DONG Li-chun, HAN Zhi-wu, LV You, et al. Anti-wear properties of ring model with bionic concave morphology[J]. Journal of Jilin University(Engineering and Technology Edition), 2011, 41(6):1659-1663.
[7]
王晓荣, 王新洪, 杜宝帅, 等.激光熔覆Fe-Ti-V-Cr-C合金涂层的微观组织和性能[J].材料工程, 2011, (3): 50-54. WANG Xiao-rong, WANG Xin-hong, DU Bao-shuai, et al. Microstructure and property of laser cladding Fe-Ti-V-Cr-C alloy coatings[J]. Journal of Materials Engineering, 2011, (3):50-54.
[8]
曾维华, 刘洪喜, 王传琦, 等.工艺参数对不锈钢表面激光熔覆Ni基涂层组织及耐腐蚀性能的影响[J].材料工程, 2012, (8):24-28. ZENG Wei-hua, LIU Hong-xi, WANG Chuan-qi, et al. Effects of technological parameters on microstructure and corrosion resistance of laser cladding Ni-based coating on stainless steel surface[J]. Journal of Materials Engineering, 2012, (8):24-28.
[9]
郭绍义, 李兴俊, 杨秋合, 等. 激光熔覆WC-Ni/TiC涂层的组织和摩擦磨损性能研究[J].材料工程, 2008, (6):72-76. GUO Shao-yi, LI Xing-jun, YANG Qiu-he, et al. Microstructure and tribological properties of laser clad WC-Ni/ TiC composite coatings[J]. Journal of Materials Engineering, 2008, (6): 72-76.
[10]
魏小波, 李洪文, 凌刚, 等.免耕播种机开沟圆盘材质与加工工艺的研究[J].农机化研究, 2007, (1):96-99.WEI Xiao-bo, LI Hong-wen, LING Gang, et al. Analysis of materials of different disc opener for no-tillage planter[J]. Journal of Agricultural Mechanization Research, 2007, (1):96-99.
[11]
王继山.免耕播种机开沟器的分析与研究[J].山西农业大学学报:社会科学版, 2007, 6(5):7-10.WANG Ji-shan. Analysis and research on the drill opener of no-tillage planter[J]. Journal of Shanxi Agricultural University (Social Science Edition), 2007, 6(5):7-10.
[12]
孙浩, 凌刚, 李洪文, 等. 扫描间距对45 钢激光熔凝强化组织性能的影响[J]. 农业工程学报, 2011, 27(2):156-160.SUN Hao, LING Gang, LI Hong-wen, et al. Influence of scanning interval on microstructure and abrasive wear resistance of 45 steel by laser melting[J]. Transactions of the CSAE, 2011, 27(2):156-160.
[13]
万其号, 布库, 李岩, 等. 大型免耕播种机开沟器结构研究[J]. 农机化研究, 2012, 34(3):45-48.WAN Qi-hao, BU Ku, LI Yan, et al. Structure analysis of the large no-till seeder openers[J]. Journal of Agricultural Mechanization Research, 2012, 34(3):45-48.
[14]
杨志贤, 戴振东.甲虫生物材料的仿生研究进展[J]. 复合材料学报, 2008, 5(2):1-9.YANG Zhi-xian, DAI Zhen-dong. Progress in bionic research on biomaterials of beetles[J]. Acta Materiae Compositae Sinica, 2008, 5(2):1-9.
[15]
韩志武, 任露泉, 刘祖斌. 激光织构仿生非光滑表面抗磨性能研究[J]. 摩擦学学报, 2004, 24(4):289-293.HAN Zhi-wu, REN Lu-quan, LIU Zu-bin. Investigation on anti-wear ability of bionic nonsmooth surfaces made by laser texturing[J].Tribology, 2004, 24(4):289-293.
[16]
ANDERS H, ANDERS N. Adhesion testing of thermally sprayed and laser deposited coatings[J]. Surface and Coatings Technology, 2004, 184(2-3):208-218.
