孙永波, 程小全, 张纪奎. 复合材料层板沉头螺栓连接研究进展[J]. 航空制造技术, 2012, (18):75-78.SUN Y B, CHENG X Q, ZHANG J K. Countersunk bolt composite joints research progress[J]. Aeronautical Manufacturing Technology, 2012, (18):75-78.
[2]
CHISHTI M, WANG C H, THOMSO R S, et al. Experimental investigation of damage progression and strength of countersunk composite joints[J].Composite Structures, 2012, 94(3):865-873.
[3]
EGAN B, MCCARTHY C T, MCCARTHY M A, et al. Stress analysis of single-bolt, single-lap, countersunk composite joints with variable bolt-hole clearance[J]. Composite Structures, 2012, 94(3):1038-1051.
[4]
孙永波. 复合材料层合板沉头螺栓连接研究[D].北京:北京航空航天大学, 2012.
[5]
STARIKOV R, SCH？N J. Quasi-static behavior of composite joints with countersunk composite and metal fasteners[J]. Composites Part B, 2001, 32(5):401-411.
[6]
CHISHTI M, WANG C H, THOMSON R S, et al. Numerical analysis of damage progression and strength of countersunk composite joints[J]. Composite Structures, 2012, 94(2):643-653.
[7]
BENCHEKCHOU B, WHITE R G. Stresses around fasteners in composite structures in flexure and effects on fatigue damage initiation part 2: countersunk bolts[J]. Composite Structures, 1995, 33(2):109-119.
[8]
IREMAN T. Three-dimensional stress analysis of bolted single-lap composite joints[J]. Composite Structures, 1998, 43(3):195-216.
[9]
李钟海. 平面编织复合材料胶螺混合连接性能研究[D]. 北京:北京航空航天大学, 2012.
[10]
HüHNE C, ZERBST A K, KUHLMANN G, et al. Progressive damage analysis of composite bolted joints with liquid shim layers using constant and continuous degradation models[J]. Composite Structures, 2010, 92(2):189-200.
[11]
KIM H, KEDWARD K T. Joining and repair of composite structures[C]. Kansas City, MO, USA:ASTM Special Technical Publication, 2003.
[12]
ASTM D5961/D5961M-10, standard test method for bearing response of polymer matrix composite laminates[S].
[13]
张爽. 复合材料机械连接结构损伤破坏仿真设计方法研究[D].北京:北京航空航天大学, 2010.
[14]
STARIKOV R, SCH？N J. Fatigue resistance of composite joints with countersunk composite and metal fasteners[J]. International Journal of Fatigue, 2002, 24(1):39-47.
[15]
DARWISH F, GHARAIBEH M, TASHTOUSH G. A modified equation for the stress concentration factor in countersunk holes[J]. European Journal of Mechanics-A/Solids, 2012, 36:94-103.
[16]
MCCARTHY C T, GRAY P J. An analytical model for the prediction of load distribution in highly torqued multi-bolt composite joints[J]. Composite Structures, 2011, 93(2):287-298.
