全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...
材料工程  2014 

纤维取向对炭纤维织物复合材料扭动微动摩擦学性能的影响

DOI: 10.3969/j.issn.1001-4381.2014.04.014, PP. 79-84

Keywords: 炭纤维织物复合材料,微动磨损,扭动微动,纤维取向,各向异性

Full-Text   Cite this paper   Add to My Lib

Abstract:

以球/平面接触方式,进行炭纤维织物复合材料与GCr15钢球之间的扭动微动磨损实验研究,讨论纤维取向对微动磨损性能的影响。结果表明该材料与金属材料类似,均存在3个微动运行区域,即部分滑移区、混合区以及滑移区,微动磨损机制为磨粒磨损和氧化磨损。炭纤维复合材料微动摩擦磨损性能表现出明显各向异性特征,即纤维平行且垂直于接触表面的纤维混合排布(N取向)复合材料的摩擦耗散能和磨损量均小于纤维平行于接触表面的P取向。在混合区域,磨损区半径随循环周次的增加而逐渐增大,且N取向小于P取向。

References

[1]  ZHAO Quan, HUANG Hao-jie. The study of design and optimization for composite wing structure of commercial aircraft[J].Science and Technology Innovation Herald,2013,(11):68-74.
[2]  WATERHOUSE R B. Fretting Corrosion[M]. England:Pergamon press,1972.
[3]  HILLS D A. Mechanics of fretting fatigue[J]. Wear,1994,175(1):107-13.
[4]  BERTHIER Y, VINCENT L, GODET M. Fretting fatigue and fretting wear[J]. Tribology International,1989,22(4):235-242.
[5]  MANJUNATHA C M, BOJJA R, JAGANNATHAN N, et al. Enhanced fatigue behavior of a glass fiber reinforced hybrid particles modified epoxy nanocomposite under WISPERX spectrum load sequence[J]. International Journal of Fatigue,2013,54:25-31.
[6]  ISA M T, AHMED A S, ADEREMI B O, et al. Effect of fiber type and combinations on the mechanical, physical and thermal stability properties of polyester hybrid composites[J]. Composites Part B:Engineering,2013,52:217-23.
[7]  TSUCHIKURA N, FAUDREE M C, NISHI Y. Charpy impact value of sandwich structural (CFRP/ABS/CFRP) composites constructed with carbon fiber reinforced epoxy polymer (CFRP) and acrylonitrile butadiene styrene (ABS) sheets separately irradiated by electron beam prior to lamination[J]. Materials Transactions,2013,54(3):371-379.
[8]  TIAN Nong, XUE Zhong-min, ZHANG Zuo-guang.Research progress of fiber reinforced polymer-based frictional materials[J].Lubrication Engineering,2009,34(2):98-101.
[9]  GUO Qing-bing, XING Dong-ming, CHEN Jiang-hua, et al. Recent progress of sliding wear properties of polymer based micro composites[J].Journal of Zhongkai University of Agriculture and Engineering,2011,24(1):61-66.
[10]  ARTERO-GUERRERO J A,PERNAS-SNCHEZ J, LPEZ-PUENTE J, et al. On the influence of filling level in CFRP aircraft fuel tank subjected to high velocity impacts[J]. Composite Structures,2014,107:570-577.
[11]  WU K T, SUN Z, JEN C K, et al. A multi-point ultrasonic detection approach to fretting crack detection in an aircraft component[A].Nondestructive Characterization for Composite Materials, Aerospace Engineering, Civil Infrastructure, and Homeland Security[C].San Diego,California:SPIE,2012.834710-834715.
[12]  LEE K J, CHENG H Z, JOU W S, et al. The influence of carbon fiber orientation on the mechanical and tribological behavior of carbon fiber/LCP composites[J]. Mater Chem Phys,2007,102(2-3):187-94.
[13]  CIRINO M, FRIEDRICH K, PIPES R. The effect of fiber orientation on the abrasive wear behavior of polymer composite materials[J]. Wear,1988,121(2):127-141.
[14]  SUNG N H, SUH N P. Friction and wear of fiber reinforced polymeric composites-effect of fiber orientation on wear[A]. 35th Annual Technical Conference[C]. Montreal,Canada:Society of Plastics Engineers,1977.311-314.
[15]  NAK-HO S, SUH N P. Effect of fiber orientation on friction and wear of fiber reinforced polymeric composites[J]. Wear,1979,53(1):129-41.

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133