SPOSITO G, WARD C, CAWLEY P, et al. A review of non-destructive techniques for the detection of creep damage in power plant steels[J]. NDT & E International, 2010, 43(7): 555-567.
[2]
HATANAKA H, IDO N, ITO T, et al. Ultrasonic creep damage detection by frequency analysis for boiler piping[J]. Journal of Pressure Vessel Technology, 2007, 129(4): 713-718.
[3]
KIM D Y, KIM H J, SONG S J, et al. Ultrasonic Method for Prediction of Residual Life of Creep Damaged Materials[M]. Melville: Amer Insit Physics, AIP Conference Proceedings, 2009: 1096, 1402-1409.
[4]
MANNAN S L, MATHEW M D. Creep Properties of Service-exposed Alloy 625 after Resolution Annealing Treatment and Microstructural Assessment Using Ultrasonic Waves[M]. Fracture Mechanics Symposium, Shanghai: East China Univ Science and Technology Press, 2009. 23-30.
[5]
OHTANI T, OGI H, HIRAO M. Noncontact evaluation of surface-wave nonlinearity for creep damage in Cr-Mo-V steel[J]. Japanese Journal of Applied Physics, 2009, 48: 07GD027.
[6]
NARAYANA V J S, BALASUBRAMANIAM K, PRAKASH R V. Detection and prediction of creep-damage of copper using nonlinear acoustic techniques//Review of Progress In Quantitative Nondestructive Evaluation, AIP Publishing, 2010, 1211(1): 1410-1417.
[7]
BABY S, NAGARAJA KOWMUDI B, OMPRAKASH C M, et al. Creep damage assessment in titanium alloy using a nonlinear ultrasonic technique[J]. Scripta Materialia, 2008, 59(8): 818-821.
[8]
KIM C, PARK I. Microstructural degradation assessment in pressure vessel steel by harmonic generation technique[J]. Journal of Nuclear Science and Technology, 2008, 45(10): 1036-1040.
[9]
ALVAREZARENAS T G, DESARABIA E R, GALLEGOJUAREZ J A. Ultrasonic evaluation of creep damage in steel[J]. Ultrasonics, 1993, 31(3): 155-159.
[10]
WATANABE T, TABUCHI M, YAMAZAKI M, et al. Creep damage evaluation of 9Cr-1Mo-V-Nb steel welded joints showing type IV fracture[J]. International Journal of Pressure Vessels and Piping, 2006, 83(1): 63-71.
[11]
HYDE T H, LI R, SUN W, et al. A simplified method for predicting the creep crack growth in P91 welds at 650℃[J]. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 2010, 224(4): 208-219.
[12]
涂善东,轩福贞,王卫泽. 高温蠕变与断裂评价的若干关键问题[J]. 金属学报, 2009,45(7): 781-787.TU Shan-dong, XUAN Fu-zhen, WANG Wei-ze. Some critical issues in creep and fracture assessment at high temperature[J]. Acta Metallurgica Sinica, 2009,45(7): 781-787.
[13]
HONG S, LEE S. Mechanism of dynamic strain aging and characterization of its effect on the low-cycle fatigue behavior in type 316L stainless steel[J]. Journal of Nuclear Materials, 2005, 340(2-3): 307-314.
[14]
席与珩,刘丽梅,崔雄华,等. 锅炉导汽管材质状态和蠕变剩余寿命评估[J]. 热力发电, 2011,40(8): 8-11.XI Yu-heng, LIU Li-mei, CUI Xiong-hua, et al. Evaluation of material state and creep residual life of steam conduit for boilers[J]. Thermal Power Generation, 2011,40(8): 8-11.
[15]
尚丽娟,田素贵,王晓亮,等. 403Nb钢的组织特征与蠕变行为[J]. 材料热处理学报, 2011,32(8): 79-83.SHANG Li-juan, TIAN Su-gui, WANG Xiao-liang, et al. Microstructure and creep behavior of 403Nb steel[J]. Translations of Materials and Heat Treatment, 2011,32(8): 79-83.
[16]
高宏波,谢守明,赵杰,等. 在役电站锅炉导汽管组织状态评估与剩余寿命预测[J]. 热力发电, 2004,33(6): 71-74.GAO Hong-bo, XIE Shou-ming, ZHAO Jie, et al. Microstructure state evaluation and residual life prediction for steam conduit of boilers in service[J]. Thermal Power Generation, 2004,33(6): 71-74.
[17]
束国刚,李益民,赵彦芬,等. 基于蠕变曲线的12Cr1MoV钢寿命外推计算方法[J]. 热力发电, 2000,29(6): 32-35.SHU Guo-gang, LI Yi-min, ZHAO Yan-fen, et al. The life extrapolation method based on creep curves for 12CrMoV heat resistant steel[J]. Thermal Power Generation, 2000,29(6): 32-35.
[18]
DAGA R, BANDYOPADHYAY G, SAMAL M K, et al. Consumed creep life fraction assessment of critical locations of an in-service super heater outlet header under surveillance programme[J]. Transactions of the Indian Institute of Metals, 2010, 63(2): 423-429.
[19]
MAHARAJ C, DEAR J P, MORRIS A. A review of methods to estimate creep damage in low-alloy steel power station steam pipes[J]. Strain, 2009, 45(4): 316-331.
