IIJIMA S.Helical microtubules of graphitic carbon[J].Nature,1991,354(6348):56-58.
[2]
SINNOTT S B,SHENDEROVA O A,WHITE C T,et al.Mechanical properties of nanotubule fibers and composites determined from theoretical calculations and simulations[J].Carbon,1998,36(1):1-9.
[3]
赵艳文,叶宏军,翟全胜,等.碳纳米管/玻纤/环氧层板超声真空灌注工艺及性能研究[J].航空材料学报,2013,33(4):58-63.ZHAO Yan-wen,YE Hong-jun,ZHAI Quang-sheng,et al.Ultrasonic vacuum resin infusion processing and property of carbon canotube/glass fiber/epoxy resin laminates[J].Journal of Aeronautical Materials,2013,33(4):58-63.
[4]
丁鹤雁.热处理前后包覆Co及Co/Fe碳纳米管电磁性能的研究[J].航空材料学报,2013,33(5):54-60.DING He-yan.Electromagnetic properties of Co and Co/Fe coated MWCNTs before and after heat treatment[J].Journal of Aeronautical Materials,2013,33(5):54-60.
[5]
熊磊,马宏毅,王汝敏,等.KH550修饰碳纳米管增韧环氧树脂的研究[J].航空材料学报,2009,29(4):63-66.XIONG Lei,MA Hong-yi,WANG Ru-min,et al.Study on multi-walled carbon nanotubes modified with KH550 on toughening epoxy resin[J].Journal of Aeronautical Materials,2009,29(4):63-66.
[6]
LU J P.Elastic properties of carbon nanotubes and nanoropes[J].Phys Rev Lett,1997,79(7):1297-1300.
[7]
姚振华,朱长纯,程敏,等.碳纳米管高温热稳定性与结构的关系[J].液晶与显示,2002,17(1):49-54.YAO Zhen-hua,ZHU Chang-chun,CHENG Min,et al.Molecular dynamics research on high temperature thermal-stability of carbon nanotube [J].Chinese Journal of Liquid Crystals and Displays,2002,17(1):49-54.
[8]
SRIVATSAN T S,GODBOLE C,PARAMSOTHY M,et al.Influence of nano-sized carbon nanotube reinforcements on tensile deformation,cyclic fatigue,and final fracture behavior of a magnesium alloy[J].Journal of Materials Science,2012,47(8):3621-3638.
[9]
周国华,曾效舒,张湛,等.挤压温度对等径角挤压碳纳米管增强AZ31镁基复合材料显微组织的影响[J].材料工程,2009,(9):20-23.ZHOU Guo-hua,ZENG Xiao-shu,ZHANG Zhan,et al.Effects of temperature on microstructure of CNTs/AZ31 alloy composites by equal channel angular pressing[J].Journal of Materials Engineering,2009,(9):20-23.
[10]
曾大新,陈玉莲.碳纳米管-铜复合粉的制备[J].材料工程,2010,(3):96-98.ZENG Da-xin,CHEN Yu-lian.Preparation of carbon nanotubes-Cu composite powder[J].Journal of Materials Engineering,2010,(3):96-98.
[11]
李霞,赵东林,侯景伟,等.碳纳米管填充金属 Ag 纳米线及其机理研究[J].材料工程,2006,(3):11-17.LI Xia,ZHAO Dong-lin,HOU Jing-wei,et al.Filling carbon nanotubes with metallic silver nanowires and its formation mechanism[J].Journal of Materials Engineering,2006,(3):11-17.
[12]
李四年,宋守志,余天庆,等.铸造法制备纳米碳管增强镁基复合材料的力学性能研究[J].铸造,2004,53(3):190-193.LI Si-nian,SONG Shou-zhi,YU Tian-qing,et al.Properties of carbon nanotubes/magnesium matrix composite by casting[J].Foundry,2004,53(3):190-193.
[13]
马仁志,朱艳秋,魏秉庆,等.铁-巴基管复合材料的研究[J].复合材料学报,1997,14(2):92-96.MA Ren-zhi,ZHU Yan-qiu,WEI Bing-qing,et al.Study on the iron-buckytube composite material[J].Acta Materiae Compositae Sinica,1997,14(2):92-96.
[14]
周国华,曾效舒,余志核,等.碳纳米管预制块铸造法制备CNTs/AZ91复合材料研究[J].铸造,2011,60(11):1099-1102.ZHOU Guo-hua,ZENG Xiao-shu,YU Zhi-he,et al.Preparation of carbon nanotubes/AZ91 composites by preform-casting[J].Foundry,2011,60(11):1099-1102.
[15]
马兆敏.铸造凝固过程三维温度场及热应力场有限元技术研究.南宁:广西大学,2002.53-60.MA Zhao-min.Study on finite element analysis technique of the 3D temperature field and thermal-stress field in foundry freezing process.Nanning:Guangxi University,2002.53-60.
[16]
吴来发,张奕麟,单保华,等.采用 CAE 软件估算V 法铸造保压和开箱冷却时间[J].特种铸造及有色合金,2011,31(9):848-850.WU Lai-fa,ZHANG Yi-lin,SHAN Bao-hua,et al.Evaluation of holding pressure time and open cooling time in V-method casting by the CAE software[J].Special Casting & Nonferrous Alloys,2011,31(9):848-850.
[17]
郑明东,何孝军,晏善成.空气气氛中碳纳米管抗氧化性能研究[J].炭素技术,2007,26(2):10-12.ZHENG Ming-dong,HE Xiao-jun,YAN Shan-cheng.Study of the anti-oxidation capability of carbon nanotubes in air[J].Carbon Techniques,2007,26(2):10-12.
[18]
曹茂盛,李辰砂,朱静.碳纳米管粉体高温石墨化的研究[J].航空材料学报,2003,23(2):30-32.CAO Mao-sheng,LI Chen-sha,ZHU Jing.An approach of graphitizating carbon nanotubes at high temperature[J].Journal of Aeronautical Materials,2003,23(2):30-32.
[19]
KIM Y A,HAYASHI T,OSAWA K,et al.Annealing effect on disordered multi-wall carbon nanotubes[J].Chemical Physics Letters,2003,380(3):319-324.
[20]
CHEN J,SHAN J Y,TSUKADA T,et al.The structural evolution of thin multi-walled carbon nanotubes during isothermal annealing[J].Carbon,2007,45(2):274-280.
