SHIN H J,AN J K,PARK S H,et al.The effect of texture on ridging of ferritic stainless steel[J].Acta Materialia,2003,51(16):4693-4706.
[2]
HUH M Y,ENGLER O.Effect of intermediate annealing on texture,formability and ridging of 17%Cr ferritic stainless steel sheet[J].Materials Science and Engineering A,2001,308(1-2):74-87.
[3]
TSUJI N,TSUZAKI K,MAKI T.Effect of initial orientation on the cold rolling behavior of solidified columnar crystals in a 19% Cr ferritic stainless steel[J].ISIJ International,1992,32(12):1319-1328.
[4]
TSUJI N,TSUZAKI K,MAKI T.Effect of initial orientation on the recrystallization behavior of solidified columnar crystals in a 19% Cr ferritic stainless steel[J].ISIJ International,1993,33(7):783-792.
[5]
何忠治,孙学范,帅仁杰.抑制剂对取向硅钢再结晶行为的影响[J].金属学报,1985,21(2):A126-A130.HE Z Z,SUN X F,SHUAI R J.Behavior of secondary recrystallization in oriented Si steel containing various inhibitors[J].Acta Metallurgica Sinica,1985,21(2):A126-A130.
[6]
HORKY P,PáCL P.Effective grain growth inhibition in silicon steel[J].Journal of Magnetism and Magnetic Materials,1984,41(1-3):14-16.
[7]
ZAVERYUKHA A,DAVIS C.An investigation into the cause of inhomogeneous distributions of aluminum nitrides in silicon steels[J].Materials Science and Engineering A,2003,345(1):23-27.
[8]
SHIMIZU Y,ITO Y,IIDA Y.Formation of the Goss orientation near the surface of 3 pct silicon steel during hot rolling[J].Metallurgical Transactions,1986,17A(8):1323-1334.
[9]
H？LSCHER M,RAABE D,LüCKE K.Rolling and recrystallization textures of bcc steels[J].Materials Technology,1991,62(12):567-575.
[10]
MATSUOKA S,MORITA M,FURUKIMI O,et al.Effect of lubrication condition on recrystallization texture of ultra-low C sheet steel hot-rolled in ferrite region[J].ISIJ International,1998,38(6):633-639.
[11]
ENGLER O,HUH M Y,TOMé C N.A study of through-thickness texture gradients in rolled sheets[J].Metallurgical and Materials Transactions A,2000,31(9):2299-2315.
[12]
崔凤娥,杨平,毛卫民.电工钢热压缩时动、静态再结晶组织及取向分析[J].材料热处理学报,2011,32(1):38-42.CUI F E,YANG P,MAO W M.Analysis of dynamic and static recrystallization microstructureandorientations in a hot-compressed electrical steel[J].Transactions of Materials and Heat Treatment,2011,32(1):38-42.
[13]
LIU H T,LIU Z Y,LI C S,et al.Solidification structure and crystallographic texture of strip casting 3wt % Si non-oriented silicon steel[J].Materials Characterization,2011,62(5):463-468.
[14]
QIAN H,YANG P,ZHENG G H,et al.Grain orientations and their influence on precipitation in hot compressed columnar grains in electrical steel[J].Materials Science Forum,2012,702-703:738-741.
[15]
SUN W P,MILITZER M,JONAS J J.Diffusion-controlled growth and coarsening of MnS during hot deformation[J].Metallurgical Transactions A,1992,23(11):3013-3023.
[16]
SUN W P,MILITZER M,JONAS J J.Strain-induced nucleation of MnS in electrical steels[J].Metallurgical Transactions A,1992,23(3):821-830.
[17]
ABE H,MATSUO M,ITO K.Cold rolling and recrystalization textures of silicon-iron crystals rolled in (100)
[18]
orientation[J].Transaction JIM,1963,4:28-32.
[19]
HU H.A study on the texture formation in rolled and annealed crystals of silicon-iron[J].Transactions of the Metallurgical Society of AIME,1961,221:130-140.
[20]
WALTER J L,KOCH E F.Electron microscope study of the structures of cold-rolled and annealed (100)
[21]
crystals of high-purity silicon-iron[J].Acta Metallurgica,1962,10(11):1059-1075.
[22]
WALTER J L,HIBBARD W R.Texture of cold-rolled and recrystallized crystals of silicon-iron[J].Transactions of the Metallurgical Society of AIME,1958,212:731-737.
[23]
MAO W M.Simulation of shear texture formation in the surface layer of interstitial free steel sheets[J].International Journal of Engineering Simulation,2001,2(1):17-23.
[24]
TAKAMIYA T,OBARA T,MURAKI M,et al.Influence of sulfur content and deformation temperature on precipitation behavior of MnS in 3% Si steel[J].Journal of the Iron and Steel Institute of Japan,2003,89(5):518-523.
[25]
安治国,毛卫民.取向电工钢中MnS粒子析出形核行为[J].材料热处理学报,2010,31(2):45-50.AN Z G,MAO W M.Precipitation nucleation behaviors of MnS particles in a grain-oriented electrical steel[J].Transactions of Materials and Heat Treatment,2010,31(2):45-50.
