杨少峰,王再友.压铸镁合金的研究进展及发展趋势[J].材料工程,2013,(11):81-88.YANG S F,WANG Z Y.New research development and its prospect on die-cast magnesium alloys[J].Journal of Materials Engineering,2013,(11):81-88.
[2]
康永林,毛卫民,胡壮麒.金属材料半固态加工理论与技术[M].北京:科学出版社,2004.
[3]
罗守靖,程远胜,单微微.半固态金属流变学[M].北京:国防工业出版社,2011.
[4]
杨柳青,康永林,张帆,等.AZ91D镁合金流变压铸成形组织特征[J].北京科技大学学报,2010,32(6):770-776.YANG L Q,KANG Y L,ZHANG F,et al.Microstructural characteristics of the rheo-diecasting AZ91D magnesium alloy[J].Journal of University of Science and Technology Beijing,2010,32(6):770-776.
[5]
PAN Q Y,FINDON M,APELIAN D.The continuous rheoconversion process (CRP):A novel SSM approach.ALEXANDROU A,APELIAN D.Proceedings of the 8th International Conference on Semi-Solid Processing of Alloys and Composites.Limassol,Cyprus:Worcester Polytechnic Institute,2004.122-129.
[6]
JI S,FAN Z,BEVIS M J.Semi-solid processing of engineering alloys by a twin-screw rheomoulding process[J].Materials Science and Engineering:A,2001,299(1-2):210-217.
[7]
ZHANG F,KANG Y L,YANG L Q,et al.Taper barrel rheomoulding process for semisolid slurry preparation and microstructure evolution of A356 aluminum alloy[J].Transactions of Nonferrous Metals Society of China,2010,20(9):1677-1684.
[8]
杨小容,毛卫民,高冲.采用蛇形管通道浇铸法制备半固态浆料[J].中国有色金属学报,2009,19(5):869-873.YANG X R,MAO W M,GAO C.Preparation of semisolid feedstock by serpentine pipe pouring[J].The Chinese Journal of Nonferrous Metals,2009,19(5):869-873.
[9]
GUO H M,YANG X J.Efficient refinement of spherical grain by LSPSF rheocasting process[J].Materials Science and Technology,2008,24(1):55-63.
[10]
杨柳青,康永林,张帆,等.A357铝合金半固态流变压铸成形组织工艺研究[J].材料工程,2009,(6):64-66.YANG L Q,KANG Y L,ZHANG F,et al.Study on microstructure-processing relationship of a semi-solid rheo-diecasting A357 aluminum alloy[J].Journal of Materials Engineering,2009,(6):64-66.
[11]
张帆,康永林,杨柳青,等.浇注温度对合金熔体冷却规律和半固态组织的影响[J].北京科技大学学报,2010,32(11):1453-1458 ZHANG F,KANG Y L,YANG L Q,et al.Effects of pouring temperature on the cooling rules of alloy melts and the semi-solid microstructure[J].Journal of University of Science and Technology Beijing,2010,32(11):1453-1458.
[12]
SEO P K,KIM D U,KANG C G.Effects of die shape and injection conditions proposed with numerical integration design on liquid segregation and mechanical properties in semi-solid die casting process[J].Journal of Materials Processing Technology,2006,176(1-3):45-54.
[13]
HU B H,TONG K K,NIU X P,et al.Design and optimization of runner and gating system for the die casting of thin-walled magnesium telecommunication parts through numerical simulation[J].Journal of Materials Processing Technology,2000,105(1-2):128-133.
[14]
ZHAO H D,BAI Y F,OUYANG X X,et al.Simulation of mold filling and prediction of gas entrapment on practical high pressure die castings[J].Transactions of Nonferrous Metals Society of China,2010,20(11):2064-2070.
[15]
ZHANG F,SONG N N,ZHANG J,et al.Numerical simulation on the filling process of rheological die casting and forming defects analysis.MLLER H,GOVENDER G.12th International Conference on Semi-solid Processing of Alloys and Composites.Cape Town,South Africa:Trans Tech Publications,2012.293-298.
[16]
ZHOU B,KANG Y L,ZHANG J,et al.Forced convection rheomoulding process for semisolid slurry preparation and microstructure evolution of 7075 aluminum alloy.MLLER H,GOVENDER G.12th International Conference on Semi-solid Processing of Alloys and Composites.Cape Town,South Africa:Trans Tech Publications,2012.422-427.
[17]
DECKER R F.The renaissance in magnesium[J].Advanced Materials & Processes,1998,154(3):31-33.
