魏鹏,柳林.孔径可调的泡沫铝材料制备研究[J],材料工程,2005,(9):30-33.WEI P, LIU L. Preparation of foamed aluminum with controllable size of pore [J].Journal of Materials Engineering, 2005,(9):30-33.
[2]
刘培生,马晓明.高孔率泡沫金属材料疲劳表征模型及实验研究[J].材料工程,2012,(5):47-58.LIU P S, MA X M. Fatigue model for foamed metals with high porosity and corresponding experimental study [J]. Journal of Materials Engineering, 2012,(5):47-58.
[3]
谢中友, 虞吉林,郑志军. 泡沫金属填充圆管横向线载荷作用下的压入分析[J]. 工程力学,2011,28(8):248-256.XIE Z Y, YU J L, ZHENG Z J. Indentation analysis of metallic foam-filled cylindrical pipe under transversely linear loading [J]. Engineering Mechanics, 2011, 28(8): 248-256.
[4]
寇玉亮, 陈常青, 卢天健.泡沫铝率相关本构模型及其在三明治夹芯板冲击吸能特性的应用研究[J]. 固体力学学报,2011,32(3):217-227.KOU Y L,CHEN C Q, LU T J.A rate-dependent constitutive model for aluminum foams and its application to the energy absorption of lightweight sandwich panels with aluminum foam c ores[J]. Chinese Journal of Solid Mechanics,2011,32(3):217-227.
[5]
KALLINA I, ZEIDLER F, BAUMANN K H, et al. The offset crash against a deformable barrier, a more realistic frontal impact[A]. In Proceedings of the 14th International Technical Conference on Enhanced Safety of Vehicles[C]. Washington DC, 1994, 1300-1304.
[6]
NASSAR H, ALBAKRI M, PAN H, et al. On the gas pressure forming of aluminium foam sandwich panels: Experiments and numerical simulations[J]. CIRP Annals-Manufacturing Technology, 2012, 61: 243-246.
[7]
ZAREI H R, KROGER M. Bending behavior of empty and foam-filled beams: Structural optimization[J]. International Journal of Impact Engineering, 2008, 35: 521-529.
[8]
赵桂平, 卢天健. 多孔金属夹层板在冲击荷载作用下的动态响应[J]. 力学学报, 2008,40(2):194-206.ZHAO G P, LU T J. Dynamic response of cellular metallic sandwich plates under impact loading [J]. Chinese Journal of Theoretical and Applied Mechanics, 2008, 40(2):194-206.
[9]
谢中友, 李剑荣, 虞吉林. 泡沫铝填充薄壁圆管的三点弯曲实验的数值模拟[J]. 固体力学学报,2007, 28(3):261-265.XIE Z Y, LI J R, YU J L. Numerical simulation of three-point bending experiments of thin-walled cylindrical tubes filled with aluminum foam [J]. Acta Mechanica Solida Sinica, 2007, 28(3): 261-265.
[10]
查海波, 凤仪, 朱琪琪,等.泡沫铝层合梁的弯曲性能[J].中国有色金属学报,2007,17(2):290-295. ZHA H B, FENG Y, ZHU Q Q, et al. Bending capability of foam aluminum sandwich beams [J].The Chinese Journal of Nonferrous Metals, 2007, 17(2):290-295.
[11]
尚金堂,何德坪.泡沫铝层合梁的三点弯曲变形[J].材料研究学报, 2003,17(1):31-38. SHANG J T, HE D P. Deformation of sandwich beams with Al foam cores in three-point bending [J]. Chinese Journal of Materials Research, 2003, 17(1):31-38.
[12]
黄刘刚.内聚力模型的分析及有限元子程序开发[D].郑州:郑州大学,2010. HUANG L G. The Analysis of cohesive zone model and user-defined subroutine development in finite element method[D].Zhengzhou:Zhengzhou University,2010.
[13]
滕锦,李斌太,庄茁.z-pin增韧复合材料层合板低速冲击损伤过程研究[J].工程力学, 2006,23(增刊1):209-216. TENG J, LI B T, ZHUANG Z. A study on low-velocity impact damage of z-pin reinforced laminates [J]. Engineering Mechanics, 2006, 23(Suppl 1):209-216.
[14]
胡靖,钱振东. 环氧沥青混合料细观尺度水损坏特性[J]. 东南大学学报, 2013, 43(2):355-359. HU J, QIAN Z D. Micro-scale moisture damage characteristics in epoxy asphalt concrete [J]. Journal of Southeast University. 2013, 43(2):355-359.
[15]
许巍,杨金水,王飞, 等.含曲线型膜基界面的高分子基金属薄膜延展性能[J].固体力学学报,2011,32(1):1-8. XU W, YANG J S, WANG F, et al. Ductility of polymer-supported metal films with curved interfaces[J]. Chinese Journal of Solid Mechanics, 2011,32(1):1-8.
