全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...
材料工程  2014 

复合SPD制备超细晶6061铝合金的组织及性能

DOI: 10.11868/j.issn.1001-4381.2014.11.011, PP. 62-66

Keywords: 反复镦压,等径角挤压,超细晶,6061铝合金,剧烈塑形变形

Full-Text   Cite this paper   Add to My Lib

Abstract:

采用反复镦压和等径角挤压相结合的复合挤压技术,在室温对退火态的6061铝合金进行4道次变形,获得等轴的超细晶铝合金。借助于透射电镜对变形过程的微观组织演变过程进行观察,提出了复合挤压过程中晶粒细化的过程。对不同实验状态的试样进行了硬度和拉伸实验,试样三个垂直面的硬度值增加了1倍,抗拉强度由165MPa增加到402.7MPa,但伸长率由26.8%下降到9.7%,复合挤压比等径角挤压对试样的力学性能影响更剧烈。

References

[1]  AZUSHIMA A, KOPP K, KORHONEN A, et al. Severe plastic deformation (SPD) processes for metals [J]. CIRP Annals-Manufacturing Technology, 2008, 57(2): 716-735.
[2]  王晓溪,李萍,谢克敏,等. 等径角挤钮变形过程中纯铝粉体材料的显微组织与力学性能[J]. 航空材料学报, 2013,33(2):13-18.WANG Xiao-xi, LI Ping, XIE Ke-min, et al. Microstructure characteristics and mechanical properties on consolidation of pure al particles through equal channel angular pressing and torsion[J]. Journal of Aeronautical Materials, 2013,33(2):13-18.
[3]  GHOSH K S, GAO N, STARINK M J. Characterisation of high pressure torsion processed 7150 Al-Zn-Mg-Cu alloy [J]. Materials Science and Engineering: A, 2012, 552: 164-171.
[4]  WAN J L, SHI Q N, QIAN T C, et al. Recrystallized microstructural evolution of UFG copper prepared by asymmetrical accumulative rolling-bonding process [J]. Transactions of Nonferrous Metals Society of China, 2010, 20(4): 559-563.
[5]  任国成, 赵国群. AZ31 镁合金等通道转角挤压应变累积均匀性分析及组织性能研究[J]. 材料工程, 2013,(10):13-19.REN Guo-cheng, ZHAO Guo-qun. Homogeneous deformation analysis and microstructure properties study of AZ31 magnesium alloy in multi-pass equal channel angular pressing [J]. Journal of Materials Engineering, 2013,(10):13-19.
[6]  LANGDON T G. The principles of grain refinement in equal-channel angular pressing[J].Materials Science and Engineering: A, 2007, 462(1): 3-11.
[7]  GUO W, WANG Q D, LIU M P, et al. Microstructure and mechanical performance of AZ31-1.7 wt.% Si alloy processed by cyclic channel die compression[A].Nanomaterials by Severe Plastic Deformation: NanSPD5[C]. Switzerland: Trans Tech Publications, 2011:457-461.
[8]  KHAN A S, MEREDITH C S. Thermo-mechanical response of Al 6061 with and without equal channel angular pressing (ECAP) [J].International Journal of Plasticity, 2010, 26(2): 189-203.
[9]  KIM J H, HWANG S K, IM Y T, et al. High-strength bolt-forming of fine-grained aluminum alloy6061 with a continuous hybrid process [J]. Materials Science and Engineering: A, 2012, 552:316-322.
[10]  FU M W, THAM Y W, HNG H H, et al. The grain refinement of Al-6061 via ECAP processing: Deformation behavior microstructure and property [J]. Materials Science and Engineering: A, 2009, 526(1-2):84-92.
[11]  IWAHASHI Y, WANG J T, HORITA Z, et al. Principle of equal-channel angular pressing for the processing of ultra-fine grained materials [J]. Scripta Materialia, 1996, 35(2):143-146.
[12]  余永宁. 金属学原理[M]. 北京:冶金工业出版社,2007:408-410.
[13]  HUANG J Y, ZHU Y T, JIANG H, et al. Microstructure and dislocation configurations in nanostructured Cu processed by repetitive corrugation and straightening [J]. Acta Materialia, 2001, 49(9):1497-1505.
[14]  罗许,史庆南,刘韶华,等. 6061铝合金超细晶制备及其组织性能的研究[J]. 材料热处理学报, 2009, 30(3):71-75. LUO Xu, SHI Qing-nan, LIU Shao-hua, et al. Study on microstructure and properties of ultra-fine-grain 6061 aluminium alloy[J]. Transactions of Materials and Heat Treatment, 2009, 30(3):71-75.
[15]  NMKASHIMA K, HORITA Z, NEMOTO M, et al. Development of a multi-pass facility for equal-channel angular pressing to high total stains[J]. Materials Science and Engineering: A, 2000, 281(1):82-87.

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133