WONG P H S, AKINWANDE D. Carbon Nanotube and Graphene Device Physics[M]. Cambridge: Cambridge University Press, 2011.74-81.
[2]
ODOM T W, HUANG J L, KIM P, et al. Atomic structure and electronic properties of single-walled carbon nanotubes[J]. Nature,1998,391: 62-64.
[3]
丁鹤雁. 热处理前后包覆Co及Co/Fe碳纳米管电磁性能的研究[J]. 航空材料学报,2013,33(5):54-60.DING He-yan. Electromagnetic properties of Co and Co/Fe coated MWCNTs before and after heat treatment[J]. Journal of Aeronautical Materials, 2013,33(5):54-60.
[4]
TESSONNIER J P, ROSENTHAL D, HANSEN T W, et al. Analysis of the structure and chemical properties of some commercial carbon nanotubes[J].Carbon,2009,47(7):1779-1798.
[5]
ZOO Y S, AN J W,LIM D P, et al. Effect of carbon nanotube addition on tribological behavior of UHMWPE [J].Tribology Letters,2004,16(4):305-309.
[6]
CHEN L M, OZISIK R, SCHADLER L S. The influence of carbon nanotube aspect ratio on the foam morphology of MWNT/PMMA nanocomposite foams[J].Polymer, 2010,51(11):2368-2375.
[7]
NING J W,ZHANG J J,PAN Y B, et al.Fabrication and thermal property of carbon nanotube/SiO2 composites [J].Journal of Materials Science Letters,2003,22(14):1019-1021.
[8]
ZHU Y F, SHI L, LIANG J,et al.Synthesis of zirconia nanoparticles on carbon nanotubes and their potential for enhancing the fracture toughness of alumina ceramics[J]. Composites, 2008,39(7-8):1136-1141.
[9]
ESAWI A M K, MORSI K, SAYED A, et al. The influence of carbon nanotube (CNT) morphology and diameter on the processing and properties of CNT-reinforced aluminium composites[J]. Composites, 2011,42 (3):234-243.
[10]
CHOI H J, BAE D H. Strengthening and toughening of aluminum by single-walled carbon nanotubes[J]. Materials Science and Engineering,2011, 528(6):2412-2417.
[11]
LIPECKA J, ANDRZEJCZUK M, LEWANDOWSKA M,et al. Evaluation of thermal stability of ultrafine grained aluminium matrix composites reinforced with carbon nanotubes[J]. Composites Science and Technology,2011,71(16):1881-1885.
[12]
STEIN J, LENCZOWSKI B, FRETY N, et al. Mechanical reinforcement of a high-performance aluminium alloy AA5083 with homogeneously dispersed multi-walled carbon nanotubes[J]. Carbon,2012,50(6):2264-2272.
[13]
CHOI H, WANG L, CHEON D, et al. Preparation by mechanical alloying of Al powders with single-, double-, and multi-walled carbon nanotubes for carbon/metal composites[J]. Composites Science and Technology, 2013,74(24) :91-98.
[14]
潘复生,张丁非.铝合金及应用[M].北京:化学工业出版社,2006.3-5.
[15]
KANG K,BAE G, KIM B, et al. Thermally activated reactions of multi-walled carbon nanotubes reinforced aluminum matrix composite during the thermal spray consolidation[J]. Materials Chemistry and Physics,2012,133(1):495-499.
[16]
LIU Q, KE L M, LIU F C, et al. Microstructure and mechanical property of multi-walled carbon nanotubes reinforced aluminum matrix composites fabricated by friction stir processing[J]. Materials and Design,2013,45:343-348.
[17]
钟蓉,丛洪涛,成会明,等.单壁纳米碳管增强纳米铝基复合材料的制备[J].材料研究学报,2002,16(4):344-348. ZHONG Rong, CONG Hong-tao, CHENG Hui-ming, et al. Preparation of SWNTs/Nano-Al composites[J]. Chinese Journal Materials Research,2002,16(4):344-348.
[18]
CHOI H J,SHIN J Y,MIN B H,et al. Reinforcing effects of carbon nanotubes in structural aluminum matrix nanocomposites[J]. Journal of Materials Research,2009,24(8):2610-2616.
[19]
MA P C, WANG S Q, KIM J K, TANG B Z. In-situ amino functionalization of carbon nanotubes using ball milling[J]. Journal of Nanoscience and Nanotechnology,2009,9(2):749-753.
[20]
PEREZ-BUSTAMANTE R,PEREZ-BUSTAMANTE F, ESTRADA-GUEL I, et al. Characterization of Al2024-CNTs composites produced by mechanical alloying[J]. Powder Technology,2011,212(3):390-396.
[21]
WANG L, CHOI H,MYOUNG J M, et al. Mechanical alloying of multi-walled carbon nanotubes and aluminium powders for the preparation of carbon/metal composites[J].Carbon,2009,47(15):3427-3433.
[22]
MORSI K, ESAWI A. Effect of mechanical alloying time and carbon nanotube (CNT) content on the evolution of aluminium (Al)-CNT composite powders[J]. Journal of Materials Science, 2007,42(13):4954-4959.
[23]
ESAWI A, MORSI K. Dispersion of carbon nanotubes (CNTs) in aluminum powder[J].Composites, 2007,38(2):646-650.
[24]
LIU Z Y,WANG Q Z,XIAO B L,et al. Experimental and modeling investigation on SiCp distribution in powder metallurgy processed SiCp/2024 Al composites[J].Materials Science and Engineering,2010,527(21-22):5582-5591.
[25]
MORSI K, ESAWI A, BORAH P, et al. Characterization and spark plasma sintering of mechanically milled aluminium-carbon nanotube (CNT) composite powders[J]. Journal of Composite Materials,2010,44(16):1991-2003.
[26]
DEMCZYK B G, WANG Y M, CUMINGS J, et al. Direct mechanical measurement of the tensile strength and elastic modulus of multiwalled carbon nanotubes[J].Materials Science and Engineering: A,2002,334(1-2):173-178.
[27]
OROWAN E. Von,zur kristallplastizitat III. über den Mechanismus des gleitvorganges[J]. Z Phys, 1934, 89: 634-659.
[28]
COX H L. The elasticity and strength of paper and other fibrous materials[J].British journal of applied physics,1952,3(3):72-79.
[29]
GEORGE R, KASHYAP K T, RAHUL R, et al. Strengthening in carbon nanotube/aluminium (CNT/Al) composites[J]. Scripta Materialia,2005,53(10): 1159-1163.
[30]
ESAWI A,MORSI K,SAYED A, et al. Effect of carbon nanotube (CNT) content on the mechanical properties of CNT-reinforced aluminium[J]. Composites Science and Technology,2010,70(16):2237-2241.
[31]
LANDRY K, KALOGEROPOULOU S, EUSTATHOPOULOS N. Wettability of carbon by aluminum and aluminum alloys[J].Materials Science and Engineering: A,1998,254(1-2):99-111.
[32]
KWON H, PARK D H, SILVAIN J F, et al. Investigation of carbon nanotube reinforced aluminum matrix composite materials[J]. Composites Science and Technology,2010,70(3):546-550.
[33]
SEONG H G, LOPEZ H F, ROBERTSON DP, et al. Interface structure in carbon and graphite fiber reinforced 2014 aluminum alloy processed with active fiber cooling[J]. Materials Science and Engineering: A, 2008,487(1-2):201-209.
[34]
INAM F,YAN X,PEIJS T,REECE M J. The sintering and grain growth behaviour of Ceramic-carbon nanotube nanocomposites[J]. Composites Science and Technology,2010,70(6):947-952.
