刘正, 王越, 王中光, 等. 镁基轻质材料的研究与应用[J]. 材料研究学报, 2000, 14(5):449-456. LIU Z, WANG Y, WANG Z G, et al. Developing trends of research and application of magnesium alloys[J]. Chinese Journal of Material Research, 2000, 14(5):449-456.
[2]
陈力禾, 赵慧杰, 刘正,等. 镁合金压铸及其在汽车工业中的应用[J]. 铸造, 1999,(10):45-50.CHEN L H, ZHAO H J, LIU Z, et al. Die casting of magnesium alloy and its application in automobile industry[J]. Foundry, 1999,(10):45-50.
[3]
黎文献.镁及镁合金[M].长沙:中南大学出版社,2005.97-102.LI W X.Magnesium and Magnesium Alloy[M].Changsha:Central South University Press,2005.97-102.
[4]
MUKAI T, WATANABE H, HIGASHI K. Application of superplasticity in commercial magnesium alloy for fabrication of structural components[J]. Material Science and Technology, 2000,16(11-12):1314-1319.
[5]
KIM W J, CHUNG S W, KUM D. Superplasticity in thin magnesium alloy sheets and deformation mechanism maps for magnesium alloys at elevated temperatures[J]. Acta Mater, 2001,49(20):3337-3345.
[6]
李峰, 桑玉博, 赵立伟. 热变形对AZ31镁合金显微组织的影响[J]. 热加工工艺, 2006,35(6):8-9.LI F, SANG Y B, ZHAO L W. Influence of hot deformation on microstructure of AZ31 alloy[J]. Hot Working Technology, 2006,35(6):8-9.
[7]
吴远志, 严红革, 陈吉华, 等. AZ31镁合金高应变速率多向锻造组织演变及力学性能[J]. 中国有色金属学报, 2012,22(11):3000-3005.WU Y Z, YAN H G, CHEN J H, et al. Microstructure evolution and mechanical properties of AZ31 magnesium alloy fabricated by high strain rate triaxial-forging[J]. The Chinese Journal of Nonferrous Metals, 2012,22(11):3000-3005.
[8]
范永革, 汪凌云. 镁合金AZ31B的高温塑性变形及加工图[J]. 中国有色金属学报, 2004,14(7):1068-1072.FAN Y G, WANG L Y. Plastic deformation at elevated temperature and processing maps of magnesium alloy[J]. The Chinese Journal of Nonferrous Metals, 2004,14(7):1068-1072.
[9]
刘晓霏, 严巍, 陈国学. AZ31B镁合金塑性变形动态再结晶的实验研究[J]. 塑性工程学报, 2005,12(3):10-13. LIU X F, YAN W, CHEN G X. The experimental study on recrystallization of magnesium alloy AZ31B during plastic deformation[J]. Journal of Plasticity Engineering, 2005,12(3):10-13.
[10]
LEE S, CHEN Y H, WANG J Y. Isothermal sheet formability of magnesium alloy AZ31 and AZ61[J]. Journal of Material Processing Technology, 2002,124(1/2):19-24.
[11]
TOZAWA Y. Deep drawing of magnesium alloy sheets[J]. Japan Inst Light Metals, 2011, 51(10): 492-497.
[12]
DOEGE E, DRODER K. Processing of magnesium sheet metals by deep drawing and stretch forming[J]. Mat Tech,1997,(7-8): 19-23.
[13]
PARK S W, ZHOU M. Separation of elastic waves in split Hopkinson bars using one-point strain measurements [J].Experimental Mechanics, 1999,39(4):287-294.
[14]
宋力, 胡时胜. SHPB数据处理中的二波法与三波法 [J].爆炸与冲击, 2005,25(4):368-373. SONG L, HU S S. Two-wave and three-wave method in SHPB data processing[J]. Explosion and Shock Waves, 2005,25(4):368-373.
[15]
张青来, 卢晨, 朱燕萍. 轧制方式对AZ31镁合金薄板组织和性能的影响[J]. 中国有色金属学报, 2004,14(3):391-397.ZHANG Q L, LU C, ZHU Y P. Effect of rolling method on microstructure and properties of AZ31 magnesium alloy thin sheet[J]. The Chinese Journal of Nonferrous Metals, 2004,14(3):391-397.
[16]
刘楚明, 刘子娟, 朱秀荣. 镁及镁合金动态再结晶研究进展[J]. 中国有色金属学报, 2006,16(1):1-12. LIU C M, LIU Z J, ZHU X R. Research and development progress of dynamic recrystallization in pure magnesium and its alloys[J]. The Chinese Journal of Nonferrous Metals, 2006,16(1):1-12.
[17]
张凯锋, 尹德良, 韩文波. 热轧AZ31镁合金温变形中的微观组织演变[J]. 航空学报, 2005,26(4):505-509. ZHANG K F, YIN D L, HAN W B. Microstructure evolution in warm deformation of hot-rolled AZ31 Mg alloy [J]. Acta Aeronautica et Astronautica Sinica, 2005,26(4):505-509.
[18]
WATANABE H, TSUTSUI H, MUKAI T, et al. Deformation mechanisms in a coarse grained Mg-Al-Zn alloy at elevated temperatures[J]. International Journal of Plasticity, 2001, 17(3): 387-397.
[19]
张凯锋, 尹德良, 吴德忠. AZ31镁合金板的热拉伸性能[J]. 中国有色金属学报, 2003,13(6):1505-1509. ZHANG K F, YIN D L, WU D Z. Deep drawability of AZ31 magnesium alloy sheets at elevated temperatures [J]. The Chinese Journal of Nonferrous Metals, 2003,13(6):1505-1509.
[20]
苌群峰, 李大永, 彭颖红. AZ31镁合金板材温热冲压数值模拟与实验研究[J]. 中国有色金属学报,2006,16(4):580-585. CHANG Q F, LI D Y, PENG Y H. Numerical simulation and experimental study of warm deep drawing of AZ31 magnesium alloy sheet [J]. The Chinese Journal of Nonferrous Metals, 2006,16(4):580-585.
[21]
才鸿年, 谭成文, 王富耻, 等. 装甲用镁合金抗弹性能表征体系探讨[J]. 中国工程科学, 2006,(2):30-33. CAI H N, TAN C W, WANG F C, et al. The characterization system of the ballistic performance of armor magnesium alloys[J]. Engineering Science, 2006,(2):30-33.
[22]
MUKAI A, DAYAN D, PITCHURE D, et al. Dynamic mechanical analysis of pure Mg and AZ31 alloy[A].Magnesium Technology[C].Warrendale: Minerals, Metals & Materials, 2004.103-106.
[23]
KOICHI ISHIKAWA, HIROYUKI WATANABE, TOSHIJI MUKAI. High strain rate deformation behavior of an AZ91 magnesium alloy at elevated temperatures[J]. Materials Letters, 2005,59(12):1511-1515.
[24]
宋博, 宋立, 胡时胜. SHPB 实验数据处理的解耦方法[J].爆炸与冲击, 1998,18(2):167-171. SONG B, SONG L, HU S S. Coupling solved method of SHPB experimental data processing[J]. Explosion and Shock Waves,1998,18(2):167-171.
[25]
杨扬, 程信林.绝热剪切的研究现状及发展趋势[J].中国有色金属学报, 2002,12(3):402-407. YANG Y, CHENG X L. Current status and trends in researches on adiabatic shearing [J].The Chinese Journal of Nonferrous Metals, 2002,12(3):402-407.
[26]
陈振华, 夏伟军, 程永奇, 等. 镁合金织构与各向异性[J]. 中国有色金属学报,2005,15(1):1-11. CHEN Z H, XIA W J, CHENG Y Q, et al. Texture and anisotropy in magnesium alloys [J]. The Chinese Journal of Nonferrous Metals, 2005,15(1):1-11.
