林雪冬,刘昌明,黄笑宇.离心铸造原位生成初生Ti(AlSi)2颗粒增强Al-16Si-6Ti复合材料筒状零件的组织与性能[J].材料工程, 2013, (7): 11-15, 23.LIN Xue-dong,LIU Chang-ming,HUANG Xiao-yu.Microsturctures and properties of Al-16Si-6Ti composites tube reinforced with in-situ primary Ti(AlSi)2 particles fabricated by centrifugal casting[J].Journal of Materials Engineering,2013,(7):11-15,23.
[2]
赵彦玲,周凯,车万博,等.铝硅合金轧制中增强体颗粒应力集中数值模拟[J].材料工程, 2013, (3): 51-54, 60.ZHAO Yan-ling,ZHOU Kai,CHE Wan-bo,et al.Numerical simulation of reinforced particle stress concentration in Al-Si alloy rolling[J].Journal of Materials Engineering,2013,(3):51-54,60.
[3]
徐建辉,龙文元,方立高.钠盐变质铝硅合金中的共晶硅相[J].航空材料学报, 2000, 20(1): 18-21, 45.XU Jian-hui,LONG Wen-yuan,FANG Li-gao.Eutectic Si-phase in Al-Si alloy modified by Na-salt[J].Journal of Aeronautical Materials,2000,20(1):18-21,45.
[4]
LIN X D, LIU C M, ZHAI Y B, et al. Influences of Si and Mg contents on microstructures of Al-xSi-yMg functionally gradient composites reinforced with in situ primary Si and Mg2Si particles by centrifugal casting [J] Journal of Materials Science, 2011,46(4): 1058-1075.
[5]
LIN X D, LIU C M, XIAO H B. Fabrication of Al-Si-Mg functionally graded materials tube reinforced with in-situ Si/Mg2Si particles by centrifugal casting [J]. Composite Part B, 2013, 45(1):8-21.
[6]
林雪冬,刘昌明,吕循佳.Si与Mg含量对离心铸造原位颗粒增强Al-xSi-yMg复合材料组织与耐磨性的影响[J].复合材料学报,2013, 30(1):155-164.LIN X D, LIU C M, LV X J. Effects of Si and Mg contents on the structures and wear resistance of centrifugal Al-xSi-yMg composites reinforced with in situ particles [J]. Acta Materiae Compositae Sinica, 2013, 30(1):155-164.
[7]
FUKUI Y, YAMANAKA N, ENOKIDA Y. Bending strength of an Al-Al3Ni functionally graded material [J]. Composites: Part B, 1997, 28: 37-43.
[8]
张宝生,程荆卫,朱景川,等.离心铸造内生强化Al3Ni/Al功能梯度材料[J].哈尔滨工业大学学报, 1998, 30(2): 99-103.ZHANG B S, CHENG J W, ZHU J C, et al. Fabrication of Al3Ni/Al functionally graded material by centrifugal casting [J]. Journal of Harbin Institute of Technology, 1998, 30(2):99-103.
[9]
OHMI T, UEDA M, ITOH Y, et al. Solidification structure of functionally graded hypereutectic Al-Ni alloys produced by centrifugal duplex casting [J]. Journal of the Japan Institute of metals, 2000, 64(7): 483-489.
[10]
WATANABE Y, NAKAMURA T. Microstructures and wear resistances of hybrid Al-(Al3Ti+Al3Ni) FGMs fabricated by a centrifugal method [J]. Intermetallics,2001, 9(1): 33-43.
[11]
WATANABE Y, SATO R, MATSUDA K, et al. Evaluation of particle size and particle shape distributions in Al-Al3Ni FGMs fabricated by a centrifugal in-situ method [J]. Science and Engineering of Composite Materials, 2004, 11(2-3):185-199.
[12]
RAJAN T P D, PILLAI R M, PAI B C. Functionally graded Al-Al3Ni in situ intermetallic composites: Fabrication and microstructural characterization [J]. Journal of Alloys and Compounds, 2008, 453(1-2):L4-L7.
[13]
WATANABE Y, SATO H, FUKUI Y. Wear properties of intermetallic compound reinforced functionally graded materials fabricated by centrifugal solid-particle and in-situ methods [J]. Journal of Solid Mechanics and Materials Engineering, 2008, 2(7): 842-853.
[14]
ROHATGI P K, SHARMA R C, PRABHAKAR K V. Microstructure and mechanical properties of unidirectionally solidified Al-Si-Ni ternary eutectic [J]. Metallurgical Transactions A, 1975, 6A:570-575.
[15]
吕循佳,刘昌明,林雪冬.离心铸造原位初生Si/Al3Ni颗粒增强铝基复合材料[J]. 特种铸造及有色合金,2012, 32(4):373-377. LV X J, LIU C M, LIN X D. Microstructure and properties of in-situ primary Si/A13Ni particles reinforced Al matrix composites fabricated by centrifugal casting [J].Special Casting & Nonferrous Alloys, 2012, 32(4): 373-377.
[16]
OGAWA T, WATANABE Y, SATO H, et al. Theoretical study on fabrication of functionally graded material with density gradient by a centrifugal solid-particle method [J]. Composites Part A-Applied Science and Manufacturing,2006,37(12):2194-2200.
