PIAO Z Y, XU B S, WANG H D, et al. Investigation of fatigue prediction of Fe-Cr alloy coatings under rolling contact based on acoustic emission technique[J]. Applied Surface Science, 2011, 257(7): 2581-2586.
[3]
MIGUEL J M, GUILEMANY J M, MELLOR B G. Acoustic emission study on WC-Co thermal sprayed coatings[J]. Materials and Science Engineering A, 2003, 352(1-2): 55-63.
[4]
MBA D. Development of acoustic emission technology for condition monitoring and diagnosis of rotating machines, bearings, pumps, gearboxes, engines and rotating structures[J]. Shock and Vibration Digest, 2006, 38(2): 3-16.
[5]
杨明纬. 声发射检测[M]. 北京: 机械工业出版社, 2005.
[6]
TANDON N, CHOUDHURY A. A review of vibration and acoustic measurement methods for the detection of damages in rolling element bearings[J]. Tribology International, 1999, 32(8): 469-480.
ZHU K P, WONG Y S, HONG G S. Wavelet analysis of sensor signals for tool condition monitoring: a review and some new results[J]. International Journal of Machine Tools & Manufacture, 2009, 49(7-8): 537-553.
[10]
ZHANG X C, XU B S, WU Y X, et al. Porosity, mechanical properties, residual stresses of supersonic plasma-sprayed Ni-based alloy coatings prepared at different powder feed rate[J]. Applied Surface Scicence, 2008, 254(13): 3879-3889.
[11]
ZHANG X C, XU B S, XUAN F Z, et al. Statistical analyses of porosity variations in plasma-sprayed Ni-based coatings[J].Journal of Alloys and Compounds,2009,467(1-2):501-508.
[12]
徐滨士, 朱绍华. 表面工程的理论与技术[M]. 北京: 国防工业出版社, 2010.
[13]
ZHU S, XU B S, YAO J K. High quality ceramic coatings sprayed by high efficiency hypersonic plasma spraying gun[J]. Material Science Forum, 2005, 475-479(5): 3981-3984.
[14]
TAN C K, MBA D. Identification of the acoustic emission source during a comparative study on diagnosis of a spur gearbox[J]. Tribology International, 2005, 38(5): 469-480.
[15]
ZHU Z K, YAN R Q, LUO L H, et al. Detection of signal transients based on wavelet and statistics for machine fault diagnosis[J]. Mechanical Systems and Signal Processing, 2009, 23(4): 1076-1097.
