梁潞华. 304、304L、316、316L 在化工容器上的应用[J].化学工程与装备, 2009, (2):54-55.LIANG L H. The application of 304、304L、316、316L in chemical containers[J].Chemical Engineering & Equipment, 2009, (2):54-55.
[2]
阮於珍, 张振灿, 褚凤敏, 等. 316型不锈钢的晶间腐蚀性能[J].物理测试, 2000, (6):4-6.RUAN Y Z, ZHANG Z C, CHU F M, et al. Intergranular attack behavior of 316 type stainless steel[J].Physics Examination and Testing, 2000, (6):4-6.
[3]
杨斌, 练章华, 王强, 等.壁厚不均缺陷对膨胀套管性能的影响[J].石油机械, 2006, 34(9):7-9.YANG B, LIAN Z H, WANG Q, et al. The effect of uneven wall thickness defect on performance of expandable casing[J].China Petroleum Machinery, 2006, 34(9):7-9.
[4]
袁志学, 王淑平.塑性变形与轧制原理[M].北京:冶金工业出版社, 2008.19-22.
[5]
孙建波, 柳伟, 路民旭.塑性变形条件下16MnR 钢的CO2腐蚀电化学行为[J].材料工程, 2009, (1):59-63.SUN J B, LIU W, LU M X. Electrochemical corrosion behavior of 16MnR steel with plastic in strain in CO2 environment[J].Journal of Materials Engineering, 2009, (1):59-63.
[6]
王松涛, 杨柯, 单以银, 等.高氮奥氏体不锈钢与316L不锈钢的冷变形行为研究[J].金属学报, 2007, 43(2):171-176.WANG S T, YANG K, SHAN Y Y, et al.Study of cold deformation behaviors of a high nitrogen austenitic stainless steel and 316L stainless steel[J].Acta Metallurgica Sinica, 2007, 43(2):171-176.
[7]
MARSHALL P. Austenitic Stainless Steels: Microstructure and Mechanical Properties[M].New York: Elsevier Applied Science Publishers, 1984.
[8]
王旱祥, 王艳红, 于桂杰, 等.套管膨胀性能试验研究[J].石油矿场机械, 2007, 36(5):61-63. WANG H X, WANG Y H, YU G J, et al. Experimental research on expandable casing[J].Oil Field Equipment, 2007, 36(5):61-63.
[9]
FURLOW W. Expandable casing program helps operator hit TD with larger tubulars[J].Offshore, 2000, (1):48-51.
[10]
许瑞萍.可膨胀管材料的研究与开发[D].天津:天津大学, 2006.1-3.
[11]
PERRY F.Expandable tubular technology: transforming the face of well construction and completion[J].World Oil, 2003, 224(2):12.
[12]
唐明, 王璐璐, 马建忠, 等.石油膨胀套管的力学性能及膨胀后的残余应力[J].西安交通大学学报, 2010, 44(7):90-95. TANG M, WANG L L, MA J Z, et al. Mechanical properties of expansion casing and residual stress after expansion[J].Journal of Xian Jiaotong University, 2010, 44(7):90-95.
[13]
钟群鹏, 赵子华, 张峥. 断口学的发展及微观断裂机理研究[J].机械强度, 2005, 27(3):358-370. ZHONG Q P, ZHAO Z H, ZHANG Z. Development of fractography and research of fracture micromechanism[J].Journal of Mechanical Strength, 2005, 27(3):358-370.
