BUCHELY M F, GUTIERREZ J C, LE'ON L M, et al. The effect of microstructure on abrasive wear of hardfacing alloys[J]. Wear, 2005, 259(1-6): 52-61.
[2]
WANG Z H, WANG Q B, CUI L. Influence of cooling rate and composition on orientation of primary carbides of Fe-Cr-C hardfacing alloys[J]. Science and Technology of Welding and Joining, 2008, 13(7): 656-672.
[3]
LU L M, SODA H, MCLEAN A. Microstructure and mechanical properties of Fe-Cr-C eutectic composites[J]. Materials Science and Engineering: A, 2003, 347(1):214-222.
[4]
KIM J H, HONG H S, KIM S J. Effect of boron addition on the cavitation erosion resistance of Fe-based hardfacing alloy[J]. Materials Letters, 2007, 61(4-5): 1235-1237.
[5]
DWIVEDI D K. Microstructure and abrasive wear behaviour of iron base hardfacing[J]. Materials Science and Technology, 2004, 20(10):1326-1330.
[6]
王智慧,贺定勇,王月琴. 硼对Fe-Cr-C耐磨堆焊合金组织的影响[J]. 材料工程, 2001,(10): 18-20.WANG Zhi-hui, HE Ding-yong, WANG Yue-qin. Influence of boron contents on the microstructures of Fe-Cr-C hardfacing alloy [J]. Journal of Materials Engineering, 2001, (10): 18-20.
[7]
SCANDELLA F, SCANDELLA R. Development of hardfacing material in Fe-Cr-Nb-C system for use under highly abrasive conditions[J]. Materials Science and Technology, 2004, 20(2):93-105.
[8]
叶荣昌, 葛长路. 硼对堆焊合金组织与性能的影响[J]. 热加工工艺, 1998, (3): 19-20.YE Rong-chang, GE Chang-lu. The influence of boron on the microstructure and properties of the surfaced alloy[J].Hot Working Technology, 1998, (3): 19-20.
[9]
LIU Z L, CHEN X, LI Y X, et al. High boron iron-based alloy and its modification[J]. Journal of Iron and Steel Research International,2009, 16(3): 37-42.
[10]
龚建勋, 李丹, 肖逸锋,等. Fe-Cr-B-C 堆焊合金的显微组织及耐磨性[J]. 材料热处理学报, 2010, 31(3): 18-20. GONG Jian-xun, LI Dan, XIAO Yi-feng, et al. Microstructure and wear resistance of Fe-Cr-B-C hardfacing alloys[J].Transactions of Materials and Heat Treatment,2010, 31(3): 18-20.
[11]
GUO C Q, KELLY P M. Boron solubility in Fe-Cr-B cast irons[J]. Materials Science and Engineering: A, 2003, 352(1-2): 40-45.
[12]
BERNS H, FISCHER A. Microstructure of Fe-Cr-C hardfacing alloys with additions of Nb, Ti and B[J]. Materials Characterization, 1997, 39(2): 499-527.
[13]
FAN C, CHEN M C, CHANG C M, et al. Microstructure change caused by (Cr,Fe)23C6 carbides in high chromium Fe-Cr-C hardfacing alloys[J]. Surface & Coatings Technology, 2006, 201(3-4):908-912.
[14]
KIM J H, KO K H, NOH S D, et al. The effect of boron on the abrasive wear behavior of austenitic Fe-based hardfacing alloys [J]. Wear, 2009, 267(9):1415-1419.
[15]
JANKANSKAS V, KREIVAITIS R, MILCIUS D, et al. Analysis of abrasive wear performance of arc welded hard layers[J]. Wear, 2008, 265 (11-12):1026-1032.
