翟华嶂, 李建保, 吴疆, 等. 发动机高温部件的陶瓷材料应用及性能测试[J]. 材料工程, 2010, (6): 78-83.ZHAI H F, LI J B, WU J, et al. Applications and performance testing of high-temperature ceramics for heat engine components[J].Journal of Materials Engineering, 2010, (6): 78-83.
[3]
项忠霞, 董刚, 林彬, 等. Si3N4陶瓷-冷激铸铁在微量润滑条件下的摩擦学特性[J]. 材料工程, 2006, (4): 24-32.XIANG Z X, DONG G, LIN B, et al. Tribological characteristics of silicon nitride-chilled cast iron with oil-less lubrication[J]. Journal of Materials Engineering, 2006,(4): 24-32.
[4]
斯松华, 方亮, 高义民, 等. Si3N4陶瓷与灰铸铁配副的摩擦学性能[J]. 摩擦学学报, 1997, 17(1): 32-37.SI S H, FANG L, GAO Y M, et al. Properties of friction and wear of Si3N4 ceramics against gray cast iron[J].Tribology, 1997,17(1): 32-37.
[5]
闫玉涛, 孙志礼, 王淑仁, 等. 几种极压抗磨剂对Si3N4陶瓷/GCr15钢副摩擦磨损性能的影响[J]. 润滑与密封, 2005, 30(2): 100-102. YAN Y T, SUN Z L, WANG S R, et al. Effects of tribological properties of Si3N4 ceramic against GCr15 steel under the lubrication of various additives[J].Lubrication Engineering, 2005, 30(2): 100-102.
[6]
NAKAMURA Y, HIRAYAMA S. Effect of liquid lubricants on the wear of gray cast iron againsts sialon ceramics[J]. Wear, 1990, 137(7): 91-97.
[7]
TURHAN H, AKSOY M, KUZUCU V, et al. The effect of manganese on the microstructure and mechanical properties of leaded-tin bronze[J].Journal of Materials Processing Technology, 2001, 114(3): 207-211.
[8]
TURHAN H. Adhesive wear resistance of Cu-Sn-Zn-Pb bronze with additions of Fe, Mn and P[J].Materials Letters, 2005, 59(12): 1463-1469.
[9]
LI W S, WANG Z P, LU Y, et al. Mechanical and tribological properties of a novel aluminium bronze material for drawing dies[J].Wear, 2006, 261(3): 155-163.
[10]
FEYZULLAHOGLU E, ZEREN A, ZEREN M. Tribological behaviour of tin-based materials and brass in oil lubricated conditions[J].Materials ＆ Design, 2008, 29(3): 714-720.
[11]
刘阳, 路阳, 袁利华, 等. 铝青铜在不同介质中的摩擦磨损行为研究[J]. 摩擦学学报, 2007, 27(2): 126-130. LIU Y, LU Y, YUAN L H, et al. A study on friction and wear of aluminium bronzes in different media[J].Tribology, 2007, 27(2): 126-130.
[12]
冯在强, 王自东, 王强松, 等. 新型铸造锡青铜合金的微观组织和性能[J]. 材料热处理学报, 2011, 32(10): 96-99. FENG Z Q,WANG Z D,WANG Q S, et al. Microstructure and mechanical properties of a new casting tin bronze alloy[J].Transactions of Materials and Heat Treatment, 2011, 32(10): 96-99.
[13]
KORSHUNOV L G, NOSKOVA N I, KORZNIKOV A V. Effect of severe plastic deformation on the microstructure and tribological properties of a babbit B83[J].The Physics of Metals and Metallography, 2009, 108(5): 519-526.
[14]
MOAZAMI GOUZI M, JENABALI JAHROMI S A, NAZARB-OLAND A. Investigation of characteristics of tin-based white metals as a bearing material[J].Materials ＆ Design, 2009, 30(6): 2283-2288.
[15]
UNLU B S. Investigation of tribological and mechanical properties of metal bearings[J].Bulletin of Materials Science, 2009, 32(4): 451-457.
[16]
吴海荣, 毕秦岭, 杨军, 等. 巴氏合金 ZChSnSb8-8海水环境下的摩擦学行为[J]. 摩擦学学报, 2011, 31(3): 271-277. WU H R,BI Q L,YANG J, et al. Tribological performance of tin-based white metal ZChSnSb 8-8 under simulated sea water environment[J].Tribology, 2011, 31(3): 271-277.
[17]
葛毅成, 易茂中, 涂徐达, 等. 不同载荷下C/C复合材料往返式滑动摩擦行为[J].中南大学学报, 2010, 41(1): 114-119. GE Y C, YI M Z, TU X D, et al. To-fro sliding tribological behavior of C/C composite under different loads[J].Journal of Central South University, 2010, 41(1): 114-119.
[18]
贺林, 朱均. 短碳纤维增强锡基巴氏合金摩擦学特性[J]. 中国有色金属学报, 1998, 8(2): 223-227. HE L, ZHU J. Tribological characteristics of short carbon fiber reinforced Sn-matrix babbitt alloy[J].The Chinese Journal of Nonferrous Metals, 1998, 8(2): 223-227.
[19]
付艳超, 王馨, 毛丹丹, 等. 巴氏合金干滑动摩擦磨损机制分析[J]. 润滑与密封, 2011, 36(5): 33-35. FU Y C, WANG X, MAO D D, et al. The wear mechanism of babbit during dry sliding friction[J].Lubrication Engineering, 2011, 36(5): 33-35.
