赖师墨.控制航空发动机运转间隙的热喷涂封严涂层[J].航空制造技术,1995,(增刊1):53-55.LAI S M. Thermal sprayed sealing coating for the control of running clearance between rator and stator in aeroengine[J].Aeronautical Manufacturing Technology, 1995,(Suppl 1):53-55.
[2]
STRINGER J, MARSHALL M B. High speed wear testing of an abradable coating[J].Wear, 2012,294(1):257-263.
[3]
孙杰,赵丹.高温合金NiAl封严涂层的电偶腐蚀行为研究[J].材料工程,2013,(7):61-65.SUN J, ZHAO D. Galvanic corrosion behavior of superalloy/NiAl seal coating[J].Journal of Materials Engineering, 2013,(7):61-65.
[4]
EBERT S, MUCKE R, MACK D, et al. Failure mechanisms of magnesia alumina spinel abradable coatings under thermal cyclic loading[J].Journal of the European Ceramic Society, 2013,33(15-16):3335-3343.
[5]
FARAOUN H, SEICHEPINE J L, CODDET C, et al. Modeling route for abradable coatings[J].Surface & Coatings Technology, 2006,200(23):6578-6582.
[6]
JOHNSTON R E. Mechanical characterization of AlSi-hBN, NiCrAl-Bentonite, and NiCrAl-Bentonite-hBN freestanding abradable coatings[J].Surface & Coatings Technology, 2011,205(10):3268-3273.
[7]
高忠宝,程旭东,王鸣,等.纳米Y-PSZ基材料高温封严涂层的研制[J].航空材料学报,2008,28(4):56-59.GAO Z B, CHENG X D, WANG M, et al. Study of abradable seal coating with nanostructure Y-PSZ reference-phase used in high temperature[J].Journal of Aeronautical Materials, 2008,28(4):56-59.
[8]
MA X, MATTHEWS A. Evaluation of abradable seal coating mechanical properties[J].Wear, 2009,267(9-10):1501-1510.
[9]
DORFMAN M, ERNING U, MALLON J. Gas turbine use "abradable" coatings for clearance-control seals[J].Sealing Technology, 2002,2002(1):7-8.
[10]
许存官,杜令忠,张伟刚,等.Ni/石墨封严涂层的盐雾腐蚀研究[J].航空材料学报,2010,30(4):53-57. XU C G, DU L Z, ZHANG W G, et al. Salt spray corrosion of Ni/graphite abradable sealing coatings[J].Journal of Aeronautical Materials, 2010,30(4):53-57.
[11]
曲选辉,张国庆,章林.粉末冶金技术在航空发动机中的应用[J].航空材料学报,2014,34(1):1-10. QU X H, ZHANG G Q, ZHANG L. Applications of powder metallurgy technologies in aero-engines[J].Journal of Aeronautical Materials, 2014,34(1):1-10.
[12]
高俊国, 陆峰,汤智慧,等.氧燃充枪比对爆炸喷涂CoCrAlYTa涂层组织和性能的影响[J].航空材料学报,2013,33(2):29-34. GAO J G, LU F, TANG Z H, et al. Influence of oxygen/fuel in-gun ratio on structure and properties of CoCrAlYTa coating prepared by detonation gun spraying[J].Journal of Aeronautical Materials, 2013,33(2):29-34.
[13]
朱佳,冀晓鹃,揭晓武,等.封严涂层材料及应用[J].材料开发与应用,2008,23(4):78-84. ZHU J, JI X J, JIE X W, et al. Sealing coatings materials and application[J].Development and Application of Materials, 2008,23(4):78-84.
[14]
刘夙伟,李曙,刘阳.封严涂层材料及其可刮削性的评价[J].中国表面工程,2009,22(1):12-18. LIU S W, LI S, LIU Y. Seal coating and evaluation of its abradability[J].China Surface Engineering, 2009,22(1):12-18.
[15]
陈恩强.聚苯酯的性能及应用[J].工程塑料应用,2002,30(8):57-60. CHEN E Q. Property and application of p-oxybenzoyl homopolyester[J].Engineering Plastics Application, 2008,30(8):57-60.
[16]
DAVIS J R. Handbook of Thermal Spray Technology[M].Ohio: ASM International, 2004.47-53.
[17]
王智平,金玉花,路阳,等.高铝青铜Cu14AlX摩擦磨损特性的研究[J].铸造,2003,52(3):185-188. WANG Z P, JIN Y H, LU Y, et al. Friction property of new wear-resistance Cu14AlX aluminium bronze[J].Foundry, 2003,52(3):185-188.
