李辉, 曲恒磊, 赵永庆, 等.显微组织对Ti-6Al-4VELI合金疲劳裂纹扩展速率的影响[J]. 稀有金属快报, 2006, 25(3): 26-29.LI H, QU H L, ZHAO Y Q, et al.Effects of microstructure on fatigue crack growth rate of damage tolerance for TC4-DT alloy[J]. Rare Metals Letters, 2006, 25(3): 26-29.
[2]
SWIFT T. Damage tolerance capability[J]. International Journal of Fatigue, 1994, 16(1): 75-96.
[3]
ARRIETA A J, STRIZ A G. Optimal design of aircraft structures with damage tolerance requirements[J]. Struct Multidisc Optim, 2005, 30(2):155-163.
[4]
陈学海, 陈康华, 董朋轩,等.7085铝合金的热变形组织演变及动态再结晶模型[J].中国有色金属学报, 2013, 23(1):44-50.CHEN X H, CHEN K H, DONG P X, et al. Microstructure evolution and dynamic recrystallization model of 7085 aluminum alloy during hot deformation[J]. The Chinese Journal of Nonferrous Metals,2013, 23(1):44-50.
[5]
SINHA V, SOBOYEJOW W O. An investigation of the effects of colony microstructure on fatigue crack growth in Ti-6Al-4V[J]. Materials Science and Engineering:A, 2001,319-321: 607-612.
[6]
曹春晓. 选材判据的变化与高损伤容限钛合金的发展[J]. 金属学报, 2002, 38(增刊): 4-11.CAO C X. Change of material selection criterion and development of high damage-tolerant titanium alloy[J]. Acta Metallurgica Sinica, 2002, 38(Suppl): 4-11.
[7]
YANG J H, LIU Q Y, SUN D B, et al. Recrystallization behavior of deformed austenite in high strength microalloyed pipeline steel[J]. Journal of Iron and Steel Research, International, 2009, 16(1): 75-80.
[8]
王智祥, 刘雪峰, 谢建新.AZ91镁合金高温变形本构关系[J]. 金属学报, 2008, 44(11): 1378-1383.WANG Z X, LIU X F, XIE J X. Constitutive relationship of hot deformation of AZ91 magnesium alloy[J]. Acta Metallurgica Sinica, 2008, 44(11): 1378-1383.
[9]
喻淼真, 王高潮, 郑漫庆, 等. TC4-DT合金应变诱发最大m值超塑性变形研究[J]. 航空材料学报, 2014, 34(3): 15-20.YU M Z, WANG G C, ZHENG M Q, et al. Superplastic deformation based on strain-induced and maximal m value in TC4-DT titanium alloy [J]. Journal of Aeronautical Materials, 2014, 34(3): 15-20.
[10]
喻淼真, 王高潮, 郑漫庆, 等. TC4-DT合金改锻工艺及超塑性变形行为[J]. 塑性工程学报, 2013, 20(5): 1-6. YU M Z, WANG G C, ZHENG M Q, et al. Forging pretreatment process and superplastic deformation behavior of TC4-DT alloy [J]. Journal of Plasticity Engineering, 2013, 20(5): 1-6.
[11]
张庭芳. 镁合金板料热拉深成形实验与数值模拟研究[D].南昌:南昌大学,2008. ZHANG T F. Study on experiment and numerical simulation of magnesium alloy sheet metal warm deep drawing[D]. Nanchang: Nanchang University,2008.
[12]
刘智恩. 材料科学基础[M].西安:西北工业大学出版社,2008. 273-274. LIU Z E. Material Science[M].Xi'an: Northwestern Polytechnical University Press, 2008. 273-274.
[13]
LIN Y C, CHEN M S. Numerical simulation and experimental verification of microstructure evolution in a three-dimensional hot upsetting process[J]. Journal of Materials Processing Technology, 2009, 209(9): 4578-4583.
[14]
范定兵, 王高潮, 赵晓宾. Ti-15-3超塑性研究[J]. 南昌航空工业学院学报:自然科学版, 2007, 21(1): 26-29. FAN D B, WANG G C, ZHAO X B. Research on superplasticity of Ti-15-3 titanium alloy[J]. Journal of Nanchang Institute of Aeronautical Technology:Natural Science Edition, 2007, 21(1): 26-29.
[15]
耿启东, 王高潮, 董洪波. TA15合金应变速率循环超塑性研究[J]. 热加工工艺, 2008,37(11): 43-48. GENG Q D, WANG G C, DONG H B. Superplasticity of TA15 titanium alloy induced by strain rate cycling[J].Hot Working Technology,2008, 37(11): 43-48.
