查柏林,王汉功,苏勋家. 超音速喷涂技术在再制造中的应用[J].中国表面工程,2006,19(5):174-177. ZHA B L, WANG H G, SU X J. Application of high velocity thermal spray in remanufacture engineering[J]. China Surface Engineering,2006,19(5):174-177.
[2]
王庆山.努氏硬度及其与维氏硬度的换算[J]. 机车车辆工艺, 2001,(2):43-44. WANG Q S. Knoop hardness and its conversion to Vickers hardness[J]. Locomotive & Rolling Stock Technology,2001,(2):43-44.
[3]
SHAW L L, GOBERMAN D, REN R M, et al. The dependency of microstructure and properties of nanosrtuctured coatings on plasma spray conditions[J].Surface and Coatings Technology,2001,130(1):1-8.
[4]
毛卫国,陈强,张斌,等. 等离子喷涂热障涂层材料弹性模量与硬度的压痕测试分析[J].材料工程,2011,(10):66-71. MAO W G, CHEN Q, ZHANG B, et al. Investigations of elastic modulus and hardness of air plasma sprayed thermal barrier coatings by nanoindentation method[J]. Journal of Materials Engineering,2011,(10):66-71.
[5]
王群,丁彭雄,陈振华,等. 超音速火焰喷涂微米和纳米结构WC-12Co涂层及其性能[J].机械工程材料,2007,31(4):17-24. WANG Q, DING P X, CHEN Z H, et al. Study of properties of conventional and nanostructured WC-12Co coatings deposited by HVOF[J]. Materials for Mechanical Engineering,2007,31(4):17-24.
[6]
ARASH G, VARIS T, TURNEN E, et al. Behavior of HVOF WC-10Co4Cr coatings with different carbide size in fine and coarse partical abrasion[J]. Journal of Thermal Spray Technology,2010,19(1-2):368-377.
[7]
张武装,高海燕,黄伯云. 纳米WC-Co复合粉的研究[J].硬质合金,2002,19(2):129-133.ZHANG W Z, GAO H Y, HUANG B Y. Study on the powder of nanosize WC-Co[J]. Cemented Carbide,2002,19(2):129-133.
[8]
程应科,张建军,徐连勇.涂层弹性模量的测量方法[J].中国科技论文在线,2008,3(4):293-298.CHENG Y K, ZHANG J J, XU L Y. Investigation on measuring the elastic modulus of coatings[J]. Sciencepaper Online,2008,3(4):293-298.
[9]
SILVA M F V, HANCOCK P, NICHOLLS J R, et al.An improved three-point bending method by nanoindentation[J].Surface and Coatings Technology,2003,169-170(1):748-752.
[10]
LI H, KHOR K A, CHEANG P.Young's modulus and fracture toughness determination of high velocity oxy-fuel-sprayed bioceramic coatings[J].Surface and Coatings Technology,2002,155(1):21-32.
[11]
XU L Y, JING H Y, HUO L X, et al.Measuring of Young's modulus of coatings by high velocity arc spraying[J].Surface and Coatings Technology,2005,26(4):13-15,20.
[12]
ZHA B L, WANG H G, SU X J. High velocity oxygen/air fuel spray[A]. Thermal Spray 2003:Advancing the Science & Applying the Technology[C]. Ohio,USA:ASM International, Materials Park,2003.789-791.
[13]
裴延波, 陈浩, 王长江,等. WC-Co涂层的发展现状与展望[J]. 石油化工腐蚀与防护,2011,28(1):1-4.PEI Y B, CHEN H, WANG C J, et al. Present development and prospect of WC-Co coatings[J]. Corrosion & Protection in Petrochemical Industry,2011,28(1):1-4.
[14]
师昌绪, 徐滨士, 张平,等. 21世纪表面工程的发展趋势[J]. 中国表面工程,2001,14(1):2-7.SHI C X, XU B S, ZHANG P, et al. Development of surface engineering in the 21st century[J]. China Surface Engineering,2001,14(1):2-7.
[15]
BARLETTA M, BOLELLI G, BONFERRONI B, et al. Wear and corrosion behavior of HVOF-sprayed WC-CoCr coatings on Al alloys[J]. Journal of Thermal Spray Technology,2010,19(1-2):358-366.
[16]
李南翔. 超音速火焰喷涂WC-Co涂层性能研究[D].大连:大连海事大学,2010. LI N X. Research on properties of HVOF sprayed WC-Co coatings[D]. Dalian:Dalian Maritime University,2010.
[17]
赵辉,王群,丁彰雄,等. HVOF喷涂纳米结构WC-12Co涂层的组织结构分析[J].表面技术,2007,36(4):1-3. ZHAO H, WANG Q, DING Z X, et al. Microstructural analysis of nanostructured WC-12Co coatings sprayed by HVOF[J]. Surface Technology,2007,36(4):1-3.
