ZAKHAROW V V, ROSTOVA T D. High-resource aluminum alloys[J].Metal Science and Heat Treatment,1995,37(5-6):203.
[2]
刘晓涛,崔建忠.A1-Zn-Mg-Cu系超高强铝合金的研究进展[J].材料导报,2005,19(3):47-50.LIU Xiao-tao, CUI Jian-zhong. Progress in research on ultra high strength A1-Zn-Mg-Cu alloy[J].Materials Review,2005,19(3):47-50.
[3]
杨守杰,杨霞.高强度铝合金的研究进展[J].粉末冶金工业,2010,20(5):47-52.YANG Shou-jie, YANG Xia. Progress in high-strength aluminum alloy research[J]. Power Metallurgy Industry,2010,20(5):47-52.
[4]
刘延斌,刘志义,李云涛,等.时效对2524铝合金热稳定性的影响[J].材料研究学报,2007,21(6):585-588.LIU Yan-bin, LIU Zhi-yi, LI Yun-tao, et al. Effect of aging process on thermal stability of 2524 aluminum alloy[J]. Chinese Journal of Materials Research,2007,21(6):585-588.
[5]
杨守杰,黄敏,朱娜,等.2D70铝合金热稳定性研究[J].航空材料学报,2003,23(Suppl):73-77.YANG Shou-jie, HUANG Min, ZHU Na, et al. Study on the thermal stability of 2D70 alloy [J].Journal of Aeronautical Materials,2003,23(Suppl):73-77.
[6]
刘晓艳,潘清林,陆智伦,等. Al-Cu-Mg-Ag耐热铝合金的热稳定性[J].中国有色金属学报,2011,21(6):1245-1251.LIU Xiao-yan, PAN Qing-lin, LU Zhi-lun, et al. Thermal stability of Al-Cu-Mg-Ag heat-resistant alloy[J]. The Chinese Journal of Nonferrous Metals,2011,21(6):1245-1251.
[7]
魏修宇,郑子樵,李世晨,等.2197铝锂合金的耐热性能[J].中国有色金属学报,2007,17(9):1417-1422.WEI Xiu-yu, ZHENG Zi-qiao, LI Shi-chen, et al. Heat resistant properties of 2197 Al-Li alloy[J]. The Chinese Journal of Nonferrous Metals,2007,17(9):1417-1422.
[8]
彭小芒,尹志民,陈军,等.热暴露对7475-T7351铝合金组织与性能的影响[J].中国有色金属学报,2008,18(10):1781-1787.PENG Xiao-mang, YIN Zhi-min, CHEN Jun, et al. Influences of thermal exposure on properties and microstructures of 7475-T7351 aluminum alloy[J].The Chinese Journal of Nonferrous Metals,2008,18(10):1781-1787.
[9]
DENG Yun-lai, WAN Li, ZHANG Yong, et al. Evolution of microstructures and textures of 7050 Al alloy hot-rolled plate during staged solution heat-treatments[J]. Journal of Alloys and Compounds,2010,498(1):88.
[10]
王东,马宗义.轧制工艺对7050铝合金显微组织和力学性能的影响[J].金属学报,2008,44(1):49-54. WANG Dong, MA Zong-yi. Effect of rolling process on microstructure and mechanical property of 7050 aluminum alloy[J].Acta Metallurgica Sinica,2008,44(1):49-54.
[11]
王正安,汪明朴,杨文超,等.1973高强高韧铝合金的时效析出及硬化行为[J].中国有色金属学报,2011,21(3):522-528. WANG Zheng-an, WANG Ming-pu, YANG Wen-chao, et al. Ageing precipitation and hardening behavior of 1973 high strength and high toughness aluminum alloy[J]. The Chinese Journal of Nonferrous Metals,2011,21(3):522-528.
[12]
LI X Z, HANSEN V. HREM study and structure modeling of the η' phase, the hardening precipitates in commercial Al-Zn-Mg alloys[J]. Acta Mater,1999,47(9):2651-2659.
[13]
樊喜刚.Al-Zn-Mg-Cu-Zr合金组织性能和断裂行为的研究.哈尔滨:哈尔滨工业大学,2007. FAN Xi-gang. Microstructure and properties as well as fracture behavior of Al-Zn-Mg-Cu-Zr alloy[D].Harbin:Harbin Institute of Technology,2007.
[14]
李海,郑子樵,王芝秀,等.7055铝合金二次时效特征研究——(Ⅱ)显微组织与断口形貌特征[J].稀有金属材料与工程,2005,34(8):1230-1234. LI Hai, ZHENG Zi-qiao, WANG Zhi-xiu,et al. Investigation of secondary ageing characteristics of 7055 aluminum alloy-(Ⅱ) microstructures and fractography[J]. Rare Metal Materials and Engineering,2005,34(8):1230-1234.
[15]
PENG Guo-sheng, CHEN Kang-hua, CHEN Song-yi, et al. Influence of dual retrogression and re-aging temper on microstructure, strength and exfoliation corrosion[J]. Transactions of Nonferrous Metals Society of China,2012,22(4):803.
[16]
贾乐,陈康华,陈送义,等.7085铝合金的高温压缩流变应力及软化行为[J].粉末冶金材料科学与工程,2012,17(4):423-429. JIA Le, CHEN Kang-hua, CHEN Song-yi, et al. Flow stress and softening behavior of 7085 aluminum alloy during compression deformation at elevated temperature[J]. Materials Science and Engineering of Powder Metallurgy,2012,17(4):423-429.
[17]
NICOLAS M, DESCHAMPS A. Characterisation and modelling of precipitate evolution in an Al-Zn-Mg alloy during non-isothermal heat treatments[J]. Acta Materialia,2003,51(20):6077-6094.
[18]
MARSH S P, GLICKMAN M E. Kinetics of phase coarsening in dense system[J]. Acta Mater,1996,44(9):3761-3771.
