赵四新,姚连登. Ti和Nb-Ti微合金化高强钢中Ti的析出行为[J].材料热处理学报,2010,31(12):71-79.ZHAO S X, YAO L D. Precipitation behavior of Ti in Ti and Nb-Ti microalloyed high strength steel[J]. Transactions of Materials and Heat Treatment, 2010,31(12):71-79.
[2]
OUCHI C. Development of steel plates by intensive use of TMCP and direct quenching processes[J]. ISIJ International,2001, 41(6): 542-553.
[3]
NOBUO S, SHINJI M,SHIGERU E. Recent development in microstructural control technologies through the thermal-mechanical control process (TMCP) with JFE steel's high performance plates[J]. JFE Technical Report,2008,(11):1-6.
[4]
毛新平,孙新军,康永林,等.薄板坯连铸连轧Ti微合金化钢的物理冶金学特征[J].金属学报,2006,42(10): 1091-1095.MAO X P,SUN X J,KANG Y L,et al.Physical metallurgy for the titanium microalloyed strip produced by thin slab casting and rolling process[J]. Acta Metallurgical Sinica, 2006,42(10): 1091-1095.
[5]
CHARLEUX M, POOLE W J. Precipitation behavior and its effect on strengthening of an HSLA-Nb/Ti steel[J]. Metall Mater Trans A, 2001,32(7) : 1635-1647.
[6]
DESCHAMPS A, DANOIX F, GEUSER F D, et al. Low temperature precipitation kinetics of niobium nitride platelets in Fe[J]. Mater Lett, 2011,65 (14) :2265-2268.
[7]
XIE Y, ZHENG T, CAIMNEY J M, et al. Strengthening from Nb-rich clusters in a Nb-microalloyed steel[J]. Scripta Mater, 2012, 66 (9):710-713.
[8]
李静宇,韦弦,于爱民,等.终冷温度对低碳贝氏体钢组织和性能的影响[J].物理测试,2008,26(6):13-20.LI J Y, WEI X,YU A M, et al. Effect of final cooling temperature on microstructure and property of low-carbon bainitic steel[J]. Physics Examination and Testing, 2008,26(6):13-20.
[9]
武会宾,尚成嘉,杨善武,等.超细化低碳贝氏体钢的回火组织及力学性能[J].金属学报,2004,40(11):1143-1150.WU H B, SHANG C J,YANG S W,et al.Tempering microstructures and mechanical properties of ultra-fine low carbon bainitic steel[J]. Acta Metallurgical Sinica, 2004,40(11): 1143-1150.
[10]
雍岐龙.钢铁材料中的第二相[M].北京:冶金工业出版社,2006. YONG Q L. The Second Phase of Steel and Iron Material[M].Beijing: Metallurgical Industry Press,2006.
[11]
CIZEK P, WYNNE B P, DAVIES C H, et al. Effect of composition and austenite deformation on the transformation characteristics of low carbon and ultra-low carbon microalloyed steels[J].Metallurgical and Materials Transactions A,2002,33(5):1331-1349.
[12]
LIU W J, JONAS J, BOUCHARD D, et al. Gibbs energies of formation of TiS and Ti4C2S2in austenite[J].ISIJ International, 1990, 30 (11): 985-990.
[13]
MAO X P, HUO X D, SUN X J,et al. Strengthening mechanisms of a new 700MPa hot rolled Ti-microalloyed steel produced by compact strip production[J]. Journal of Materials Processing Technology, 2010,210(12):1660-1666.
[14]
吴静,张恒华.铌微合金钢析出相的形成与长大规律[J].金属热处理,2011,36(4):4-7. WU J,ZHANG H H. Formation and growth rules of participate in niobium micro-alloyed steel[J]. Heat Treatment of Metals, 2011,36(4):4-7.
[15]
余伟.针状铁素体管线钢控轧控冷工艺及碳氮化物析出规律研究[D].北京:北京科技大学,2008. YU W. Study on TMCP process and precipitation of carbonitride of acicular ferrite pipeline steel[D].Beijing: University of Science and Technology Beijing,2008.
[16]
ARDO D. Micro-alloyed strip steels for the 21st century [J]. Materials Science Forum, 1998, 284(15): 15-26.
[17]
刘建. 钒氮微合金化对高强度热轧钢板组织与性能的影响[D].昆明:昆明理工大学,2006. LIU J. Study on the effect of V-N microalloyed on microstructure and properties of high strength hot rolled sheet[D].Kunming: Kunming University of Science and Technology,2006.
[18]
LI Y, CROWTHER D N, MITCHELL P S, et al. The evolution of microstructure during thin slab direct rolling processing in vanadium microalloyed steels[J].ISIJ International,2002,42(6):636-644.
[19]
HUNG W Y, CHING Y H, JER R Y. Characterization of interphase-precipitated nanometer-sized carbides in a Ti-Mo-bearing steel [J]. Scripta Materialia,2009,61(6): 616-619.
[20]
焦增宝,刘锦川. 新型纳米强化超高强度钢的研究与进展[J].中国材料进展,2011,30(12):6-11. JIAO Z B, LIU J C. Research and development of advanced nano-precipitate strengthened ultra-high strength steels[J]. Materials China,2011,30(12):6-11.
