王川.TiAl基合金板材制备与组织性能研究[D].哈尔滨:哈尔滨工业大学,2007.WANG Chuan. Preparation, microstructure and mechanical properties of TiAl based alloy sheet[D].Harbin: Harbin Institute of Technology,2007.
[2]
张宏亮.粉末冶金钼管热挤压工艺基础研究[D].太原:太原理工大学,2010.ZHANG Hong-liang. The fundamental research of hot extrusion process for powder metallurgy molybdenum tube[D].Taiyuan: Taiyuan University of Technology,2010.
[3]
赵传涛.非致密体钼的热压扭成形数值模拟[D].合肥:合肥工业大学,2008. ZHAO Chuan-tao. Numerical simulation of hot torsion and compression of porous molybdenum[D].Hefei: Hefei University of Technology,2008.
[4]
薛克敏,王晓溪,李萍,等.纯钼粉多孔烧结材料ECAP的数值模拟及实验[J].中国有色金属学报,2011,21(1):32-37. XUE Ke-min, WANG Xiao-xi, LI Ping, et al. Numerical simulation study of ECAP on sintered power molybdenum materials[J].Transactions of Nonferrous Metals Society of China,2011,21(1): 32-37.
[5]
HONG Shen-ze, WANG Shu-jun, CAI Ke-yu. Thermo dynamic couple numerical simulation of the temperature field in hot forging forming process[J].Materials Processing Technology, 2009,41(12):1120-1125.
[6]
罗文波,胡云贵,胡自化.圆柱平板间镦粗的热力分析[J].塑性工程学报,2000,7(1):64-68. LUO Wen-bo, HU Yun-gui, HU Zi-hua. Thermo chemical analysis of upsetting of cylindrical billet between rough plate dies [J].Plasticity Engineering,2000,7(1):64-68.
[7]
CHO J R, YOO Y S, JEONG H S. The Al powder process: its finite analysis[J].Materials Processing Technology,2001,111:204-209.
[8]
OHSER-WIEDEMANN R, MARTIN U, SEIFERT H J, et al. Densification behaviour of pure molybdenum powder by spark plasma sintering[J].Refractory Metals & Hard Materials,2010,28(4):550-557.
[9]
LEICHTFRIED GSCHNEIBEL J H, HEILMAIER M. Ductility and impact resistance of powder-metallurgical molybdenum-rhenium alloys[J].Physical Metallurgy and Materials Science,2006,37(10):2955-2961.
[10]
SINGH S, JHA A K, KUNAR S. Upper bound analysis and experimental investigations of dynamic effects during sinter-forging of irregular polygonal performs[J].Materials Processing Technology, 2007,194(1):134-144.
[11]
HUANG Cheng-chao, CHENG Jung-ho. Forging simulation of sintered powder compacts under various frictional conditions[J]. Mechanical Sciences,2002,44(3):489-507.
[12]
SHANMUGASUNDARAM D, CHANDRAMOULI R. Tensile and impact behavior of sinter-forged Cr, Ni and Mo alloyed powder metallurgy steels[J].Materials & Design,2009,30(9):3444-3449.
[13]
华林,毛华杰,赵仲治.粉末冶金锻造变形力和密度计算[J].粉末冶金工业,2010,10(1):26-31.HUANG Lin, MAO Hua-jie, ZHAO Zhong-zhi. Calculation of pressure and densification for powder forging[J].Powder Metallurgical Industry,2010,10(1):26-31.
[14]
周灿栋,蒋国昌,朱钰如.粉末锻造制备含氮奥氏体不锈钢[J].粉末冶金技术,2004,22(1):41-44.ZHOU Can-dong, JIANG Guo-chang, ZHU Yu-ru. Production of nitrogenous austenitic stainless steel by powder forging[J].Powder Metallurgy Technology,2004,22(1):41-44.
[15]
李萍,薛克敏,吕炎.Ti-15-3合金反挤压成形的热力耦合模拟[J].中国有色金属学报,2002,12(3):578-581. LI Ping, XUE Ke-min, LU Yan. Numerical simulation of coupled thermo-mechanical behavior of Ti-15-3 alloy during back-extrusion[J].Transactions of Nonferrous Metals Society of China,2002,12(3):578-581.
