LI L,YIN F X,NAGAI K.Progress of laminated materials and clad steels production[J].Materials Science Forum,2011,675-677:439-447.
[2]
李龙,张心金,刘会云,等.不锈钢复合板的制造技术及工业应用[J].轧钢,2013,30(3):43-47. LI Long,ZHANG Xin-jin,LIU Hui-yun,et al.Production technology and application of stainless steel clad plate[J].Steel Rolling,2013,30(3):43-47.
[3]
王有铭,李曼云,韦光.钢材的控制轧制和控制冷却[M].北京:冶金工业出版社,2012.93. WANG You-ming,LI Man-yun,WEI Guang.Controlled Rolling and Controlled Cooling of Steels[M].Beijing:Metallurgical Industry Press,2012.93.
[4]
岳重祥,白晓虹,刘东升.利用TMCP开发F550高强度船板钢的实验研究[J].材料工程,2013,(2):7-11. YUE Chong-xiang,BAI Xiao-hong,LIU Dong-sheng.F550 High strength plate steel for shipbuilding produced by TMCP[J].Journal of Materials Engineering,2013,(2):7-11.
[5]
谢广明,骆宗安,王光磊,等.真空轧制不锈钢复合板的组织和性能[J].东北大学学报:自然科学版,2011,32(10):1398-1401. XIE Guang-ming,LUO Zong-an,WANG Guang-lei,et al.Microstructure and properties of stainless steel clad plate by vacuum rolling cladding[J].Journal of Northeastern University: Natural Science,2011,32(10):1398-1401.
[6]
冯志猛,蔡宏图.奥氏体不锈钢及其复合板热加工与敏化温度[J].石油化工设备,2002,31(6):38-39. FENG Zhi-meng,CAI Hong-tu.Heat processing and sensitizing temperature of austenitic stainless steel and clad plate[J].Petro-Chemical Equipment,2011,32(10):1398-1401.
[7]
日本高圧力技術協会.ステンレスクラッド鋼の熱処理技術指針[J].圧力技術,1992,30(1):42-54. High Pressure Institute of Japan.Heat treatment technology of stainless clad steel[J].Journal of High Pressure Institute of Japan,1992,30(1):42-54.
[8]
王国栋,刘相华,朱伏先,等.新一代钢铁材料的研究开发现状和发展趋势[J],鞍钢技术,2005,(4):1-7. WANG Guo-dong,LIU Xiang-hua,ZHU Fu-xian,et al.Present situation of studying a new generation iron and steel material and its development tendency[J].Angang Technology,2005,(4):1-7.
[9]
李龙,丁桦,杜林秀,等.TMCP对低碳锰钢组织和力学性能的影响[J].钢铁,2006,41(11):53-57. LI Long,DING Hua,DU Lin-xiu,et al.Effect of TMCP on microstructure and mechanical properties of low carbon-manganese steel[J].Iron and Steel,2006,41(11):53-57.
[10]
RAO N V,SARMA D S,NAGARJUNA S.Influence of hot rolling and heat treatment on structure and properties of HSLA steel explosively clad with austenitic stainless steel[J].Materials Science Technology,2009,25(11):1387-1396.
[11]
VAIDYANATH L R,NICHOLAS M G,MILNER D R.Pressure welding by rolling at elevated temperatures[J].British Weld Journal, 1959,6:13-28.
[12]
SUEHIRO M,HASHIMOTO Y.Carbon distribution near interface between base and cladding steels in austenite stainless clad steel sheet[J].ISIJ,1989,(9):1501-1507.
[13]
UEDA Y,MURAKAWA H,MA N X.Measuring method for residual stresses in explosively clad plates and a method of residual stress reduction[J].Journal of Engineer Materials and Technology,1996,118(4):576-582.
