BOADE R R. Dynamic compression of porous tugsten[J]. Journal of Applied Physics, 1969, 40(9): 3781-3785.
[2]
BONNAN S, HEREIL P L. Experimental characterization of quasi static and shock wave behavior of porous aluminum[J]. Journal of Applied Physics, 2008, 83(11):5741-5749.
[3]
Da SILVA M G, RAMESH K T. The rate-dependent deformations of porous pure iron[J]. International Journal of Plasticity, 1997, 13(6-7): 587-610.
[4]
李斌潮,赵桂平, 卢天健. 高孔隙率闭孔泡沫铝的低应变率压缩行为[J]. 力学学报,2011,43(1):122-135. LI Bin-chao, ZHAO Gui-ping, LU Tian-jian. Low strain rate compressive behavior of high porosity closed-cell aluminum foams[J]. Chinese Journal of Theoretical and Applied Mechanics, 2011,43(1):122-135.
[5]
王永刚,胡时胜,王礼立. 爆炸荷载下泡沫铝材料中冲击波衰减特性的实验和数值模拟研究[J]. 爆炸与冲击, 2003, 23(6): 516-522. WANG Yong-gang, HU Shi-sheng, WANG Li-li. Shock attenuation in aluminum foams under explosion loading[J]. Explosion and Shock Waves, 2003,23(6):516-522.
[6]
经福谦. 实验物态方程导引[M]. 北京: 科学出版社, 1999.
[7]
王礼立. 应力波基础[M]. 北京:国防工业出版社,2010.
[8]
刘海燕, 宋卫东, 宁建国. 不同晶粒度钨合金动态力学性能研究[J]. 材料工程, 2007,(6): 3-6. LIU Hai-yan, SONG Wei-dong, NING Jian-guo. Dynamic behavior of tungsten alloys with different grain sizes[J].Journal of Materials Engineering, 2007,(6): 3-6.
[9]
姜芳, 陈涛, 宁建国. 钢筋混凝土在冲击载荷下的动态力学性能[J]. 材料工程, 2009, (3): 45-48. JIANG Fang, CHEN Tao, NING Jian-guo. Dynamic mechanical properties of reinforced concrete subjected to shock loading[J]. Journal of Materials Engineering, 2009, (3): 45-48.
[10]
FIELD J E, WALLEY S M, PROUD W G, et al. Review of experimental techniques for high rate deformation and shock studies[J]. International Journal of Impact Engineering, 2004, 30(7): 725-775.
[11]
赵士达, 沈乐天, 赵双录. 用于材料动态性能实验的单极轻气炮[J]. 兵工学报,1985,(4):49-55. ZHAO Shi-da, SHEN Le-tian, ZHAO Shuang-lu. A single-stage light gas gun for impact studies[J].Acta Armamentarii, 1985,(4):49-55.
[12]
李伯琼. 多孔钛的孔隙特征和力学性能的研究[D]. 大连:大连交通大学, 2005. LI Bo-qiong. The investigation of pore characteristic and mechanical property of porous Ti[D].Dalian: Dalian Jiaotong University,2005.
[13]
张晓伟,王彦莉,陈利,等. 多孔金属介质的力学性能及其参数依赖性研究[J]. 材料工程, 2014, (2): 55-59. ZHANG Xiao-wei, WANG Yan-li, CHEN Li,et al. Mechanical properties of porous metal materials and their dependence on geometric parameters[J]. Journal of Materials Engineering, 2014,(2): 55-59.
[14]
刘培生,夏凤金,罗军. 多孔材料模型分析[J]. 材料工程, 2009, (7): 83-87. LIU Pei-sheng, XIA Feng-jin, LUO Jun. Analyses of the classical model for porous materials[J]. Journal of Materials Engineering, 2009, (7): 83-87.
[15]
IDE T,TANE M, IKEDA T. Compressive properties of lotus-type porous stainless steel[J]. Journal of Materials Research, 2006, 21(1): 185-193.
[16]
STEINBERG D J. Equation of State and Strength Properties of Selected Materials[M]. Livermore: Lawrence Livermore National Laboratory, 2003.
