KOVACS J G, SIKLO B. Experimental validation of simulated weld line formation in injection moulded parts[J]. Polymer Testing, 2010, 29(7):910-914.
[2]
OZCELIK B, KURAM E, TOPAL M M. Investigation the effects of obstacle geometries and injection molding parameters on weld line strength using experimental and finite element methods in plastic injection molding[J]. International Communications in Heat and Mass Transfer, 2012, 39(2):275-281.
[3]
WANG G L,ZHAO G Q,WANG X X. Effects of cavity surface temperature on mechanical properties of specimens with and without a weld line in rapid heat cycle molding[J]. Materials and Design, 2013, 46(4):457-472.
[4]
CHEN S C, JONG W R, CHANG J A. Dynamic mold surface temperature control using induction heating and its effects on the surface appearance of weld line[J]. Journal of Applied Polymer Science, 2006, 101(2):1174-1180.
[5]
LI H, GUO Z, LI D. Reducing the effects of weld lines on appearance of plastic products by Taguchi experimental method[J]. International Journal of Advanced Manufacturing Technology, 2007, 32(9-10):927-931.
[6]
CHEN C S, CHEN T J, CHEN R D, et al. Investigation on the weld line strength of thin-wall injection molded ABS parts[J]. International Communications in Heat and Mass Transfer, 2007, 34 (4):448-455.
[7]
LIU S J, WU J Y, CHANG J H. An experimental matrix design to optimize the weld line strength in injection molded parts[J]. Polymer Engineering and Science, 2000, 40(5):1256-1262.
[8]
WU C H, LIANG W J. Effects of geometry and injection molding parameters on weld line strength[J]. Polymer Engineering and Science, 2005, 45(7):1021-1030.
[9]
CHEN S C, CHANG Y, CHANG Y P, et al. Effect of cavity surface coating on mold temperature variation and the quality of injection molded parts[J]. International Communications in Heat and Mass Transfer, 2009, 36(10):1030-1035.
[10]
OZCELIK B. Optimization of injection parameters for mechanical properties of specimens with weld line of polypropylene using Taguchi method[J]. International Communications in Heat and Mass Transfer, 2011, 38(8):1067-1072.
[11]
HASHEMI S. Effect of temperature on weldline integrity of injection moulded short glass fibre and glass bead filled ABS hybrids[J]. Polymer Testing, 2010, 29(3):327-336.
[12]
BIEROGEL C, GRELLMANNA W, FAHNERT T, et al. Material parameters for the evaluation of PA welds using laser extensometry[J]. Polymer Testing, 2006, 25(8):1024-1037.
[13]
XIE L, ZIEGMANN G. Influence of processing parameters on micro injection molded weld line mechanical properties of polypropylene (PP)[J]. Microsystem Technologies, 2009, 15(9): 1427-1435.
[14]
肖长江,刘春太,申长雨. 注塑制件熔接痕的形成、性能和预测[J]. 工程塑料应用,2003, 31(3):17-20. XIAO Chang-jiang, LIU Chun-tai, SHEN Chang-yu. Formation, performance and prediction of weld mark in injection molding[J]. Journal of Engineering Plastics Application, 2003, 31(3):17-20.
[15]
FéLIX M, ROMERO A, MARTíN-ALFONSO J E, et al. Development of crayfish protein-PCL biocomposite material processed by injection moulding. Composites Part B: Engineering, 2015, 78(1):291-297.
[16]
XIAO C L, HUANG H X. Development of a rapid thermal cycling molding with electric heating and water impingement cooling for injection molding applications. Applied Thermal Engineering, 2014, 73(1):712-722.
[17]
ZHAO G Q, WANG G L, GUAN Y J, et al. Research and application of a new rapid heat cycle molding with electric heating and coolant cooling to improve the surface quality of large LCD TV panels[J]. Polymers for Advanced Technologies, 2011, 22(5):476-487.
[18]
王桂龙,赵国群,李辉平,等.基于CAE的大型LCD注塑面板变模温设计与分析[J]. 材料工程, 2009, (9):24-28. WANG Gui-long, ZHAO Guo-qun, LI Hui-ping, et al. Design and analysis of variotherm injection molding of large LCD panel based on CAE[J]. Journal of Materials Engineering, 2009, (9):24-28.
