CAO Y X, DU L Z, HUANG C B, et al.Wear behavior of sintered hexagonal boron nitride under atmosphere and water vapor ambiences[J]. Applied Surface Science, 2011, 257(23): 10195-10200.
[2]
ZHU S Y, BI Q L, YANG J, et al. Influence of Cr content on tribological properties of Ni3Al matrix high temperature self-lubricating composites[J]. Tribology International, 2011, 44(10): 1182-1187.
[3]
潘国梁, 乔红斌, 郭强. 复合型固体润滑膜的滚动/滑动复合干磨损特性[J]. 哈尔滨工业大学学报, 2006, 38(增刊): 298-302. PAN Guo-liang, QIAO Hong-bin, GUO Qiang. Dry rolling/sliding wear characteristics of solid lubricating composite films[J]. Journal of Harbin Institute of Technology,2006,38(Suppl):298-302.
[4]
乔红斌, 郭强, 潘国梁,等. 粉末涂料固体润滑膜滚动/滑动复合干摩擦磨损特性研究[J]. 润滑与密封, 2006,(3): 47-49. QIAO Hong-bin, GUO Qiang, PAN Guo-liang,et al. Friction and wear characteristics of the polymer powder coatings for solid lubrication under the dry rolling/sliding condition[J]. Lubrication Engineering, 2006,(3): 47-49.
[5]
陈建敏,冶银平,党鸿辛.粘结固体润滑膜及其应用[J].摩擦学报,1994,14(2):180-189. CHEN Jian-min, YE Yin-ping, DANG Hong-xin. Developing situation and application of bonded solid lubricant films[J]. Tribology, 1994, 14(2): 180-189.
[6]
严晓华, 陈国需. 固体润滑技术的研究现状及展望[J]. 能源研究与信息, 2005, 21(2): 69-73. YAN Xiao-hua, CHEN Guo-xu. Current development and future prospects on solid lubricating techniques[J].Energy Research and Information, 2005, 21(2): 69-73.
[7]
罗军,王运动,蔡振兵,等.粘结MoS2固体润滑涂层的转动微动磨损特性[J].机械工程学报,2012,48(17):100-105. LUO Jun,WANG Yun-dong,CAI Zhen-bing,et al.Rotational fretting wear characteristics of bonded molybdenum disulfide solid lubrication coating[J].Journal of Mechanical Engineering,2012,48(17):100-105.
[8]
王小静,邵红红,王季.射频磁控溅射法制备MoS2/SiC双层薄膜[J].机械工程材料,2012,36(2):68-71. WANG Xiao-jing,SHAO Hong-hong,WANG Ji.MoS2/SiC double films prepared by radio frequency magnetron sputtering[J]. Materials for Mechanical Engineering,2012,36(2):68-71.
[9]
YANG J, LUO J B, PANG S Q. Effect of Ti or TiN codeposition on the performance of MoS2 based composite coatings[J]. Thin Solid Films, 2004, 461(2): 288-293.
[10]
高名传,童向阳,汪洪生.热喷涂法制备钼系涂层的研究进展[J].中国钼业,2014,38(6):41-47. GAO Ming-chuan,TONG Xiang-yang,WANG Hong-sheng.Research progress of Mo-based coatings fabricated by thermal spray technology[J].China Molybdenum Industry,2014,38(6):41-47.
[11]
WEI R H, YANG H B, DU K, et al.Preparation of type-ⅡMoS2 film by chemical bath deposition onto Si coated with electrolessly Ni[J]. Materials Science and Engineering: B, 2007, 138(3): 259-262.
[12]
SPALVINS T. Coatings for wear and lubrication[J]. Thin Solid Films,1978,53:285-300.
[13]
赵学敏,汪刘应,张虎,等.固体润滑涂层研究工艺的研究进展[J].材料导报,2013,27(22):68-71. ZHAO Xue-min,WANG Liu-ying,ZHANG Hu,et al.Research progress on the preparation of solid lubricating coatings[J].Materials Review,2013,27(22):68-71.
[14]
刘政军,冯丽峰,成明华,等.材料表面改性技术原理分析[J].现代焊接,2008,(8):21-25. LIU Zheng-jun,FENG Li-feng,CHENG Ming-hua,et al.Brief analysis of the principle of material surface modification technology[J].Modern Welding Technology,2008,(8):21-25.
[15]
YOSHIDA H,LU Y,NAKAYAMA H,et al. Fabrication of TiO2 film by mechanical coating technique and its photocatalytic activity[J]. Journal of Alloys and Compounds,2009,475(1-2):383-386.
[16]
HAO L, LU Y, SATO H, et al.Fabrication of zinc coatings on alumina balls from zinc powder by mechanical coating technique and the process analysis[J]. Powder Technology,2012,228:377-384.
[17]
HAO L, LU Y,HIROSHI A, et al.The influence of the processing parameters on the formation of iron thin films on alumina balls by mechanical coating technique[J]. Journal of Materials Processing Technology,2012,212(5):1169-1176.
[18]
LU Y, YOSHIDA H, NAKAYAMA H, et al. Formation of TiO2/Ti composite photocatalyst film by 2-step mechanical coating technique[J]. Materials Science Forum,2011,675-677:1229-1232.
[19]
ROSENKRANZ S, BREITUNG-FAES S, KWADE A.Experimental investigations and modeling of the ball motion in planetary ball mills[J]. Powder Technology,2011, 212(1): 224-230.
[20]
ERDEM A S, ERGüN S L.The effect of ball size on breakage rate parameter in a pilot scale ball mill[J]. Minerals Engineering, 2009, 22(7-8): 660-664.
[21]
GU L, CAO G J, WANG L Q, et al. Synthesis and characterization of a self-lubricating film on bearing balls[J]. Advanced Materials Research, 2011,154-155: 367-370.
赵军军, 张平, 韩文政. 离子渗硫技术在装甲车辆中的应用[J]. 装甲兵工程学院学报, 2003, 17(1): 10-14. ZHAO Jun-jun, ZHANG Ping, HAN Wen-zheng. The application of ion sulphidizing process to armored vehicle[J]. Journal of Armored Force Engineering Institute, 2003, 17(1): 10-14.
[24]
王海斗, 徐滨士, 刘家浚,等. 两步法制备固体润滑FeS薄膜的摩擦磨损性能研究[J].摩擦学学报, 2005, 25(4):304-306. WANG Hai-dou, XU Bin-shi, LIU Jia-jun,et al. Study on the tribological properties of FeS solid lubrication films prepared by two-step method[J]. Tribology, 2005, 25(4):304-306.
