蔡仁良. 流体密封技术:原理与工程应用[M]. 北京:化学工业出版社,2013. CAI R L. Fluid Sealing Technology-Principles and Engineering Applications[M]. Beijing: Chemical Industry Press, 2013.
[2]
STOLARSKI T A, TUCKER M. Frictional performance of an O-ring type seal at the commencement of linear motion[J]. Tribology Letters, 1996, 2(4): 405-416.
[3]
邹建华, 吴榕. 分析液压缸活塞杆密封失效原因及防止措施[J].液压与气动密封, 2005, (5): 46-48. ZOU J H, WU R. Sealing failure analysis of hydraulic cylinder's rod and preventive measures[J]. Hydraulics Preumatics & Seals, 2005, (5): 46-48.
[4]
DARLING S. Main Coolant Pump Seal Maintenance Guide[M]. USA: Electric Power Research Institute(EPRI), 1993.
[5]
SEBASTIANI M, MANGIONE V, DE FELICIS D. Wear mechanisms and in-service surface modifications of a satellite 6B Co-Cr alloy[J]. Wear, 2012, 290-291(6): 10-17.
[6]
吕仁国, 李同生, 刘旭军. 橡胶摩擦磨损特性的研究进展[J]. 高分子材料科学与工程, 2002,18(5): 12-15. LV R G, LI T S, LIU X J. Advances in study on friction-wear of rubbers[J]. Polymer Materials Science & Engineering, 2002, 18(5):12-15.
[7]
ZHANG S W. State-of-the-art of polymer tribology[J]. Tribology International, 1998, 31(1-3): 49-60.
[8]
FELHOS D, KARGER-KOCSIS J. Tribological testing of peroxide-cured EPDM rubbers with different carbon black contents under dry sliding conditions against steel[J]. Tribology International, 2008, 41(5): 404-415.
[9]
庞佑霞, 许焰, 张昊, 等. 微/纳米复合涂层的抗冲蚀磨损性能[J]. 材料工程, 2013, (9): 60-63. PANG Y X, XU Y, ZHANG H, et al. Erosion resistance of micro/nano composite coating[J]. Journal of Materials Engineering, 2013, (9): 60-63.
[10]
WANG L P, GUAN X Y, ZHANG G A. Friction and wear behaviors of carbon-based multilayer coatings sliding against different rubbers in water environment[J]. Tribology International, 2013, 64(8): 69-77.
[11]
何仁洋, 张嗣伟, 王德国. 在干摩擦和边界润滑条件下丁苯橡胶对20#钢的磨损机理研究[J]. 石油大学学报(自然科学版), 2002, 26(1): 59-63. HE R Y, ZHANG S W, WANG D G. Mechanism of wear of 20# steel by styrene-butadiene rubber under the conditions of dry friction and boundary lubrication[J]. Journal of the University of Petroleum, China, 2002, 26(1): 59-63.
[12]
张益, 王世杰, 吕晓仁, 等. 天然石油介质中丁腈橡胶-45#钢摩擦规律研究[J]. 润滑与密封, 2010, 35(8): 51-53. ZHANG Y, WANG S J, LV X R, et al. Study of friction of NBR by 45# steel in crude oil medium[J]. Lubrication Engineering, 2010, 35(8): 51-53.
[13]
MOHAMMADREZA M, ELISABET K, BRAHAM P. Tribological behavior of an elastomer aged in different oils[J]. Tribology International, 2008, 41(9-10): 860-866.
[14]
VINOGRADOV G V, MUSTAFAEV V A, PODOLSKY Y Y. A study of heavy metal-to-plastic friction duties and of the wear of hardened steel in the presence of polymers[J]. Wear, 1965, 8(5): 358-373.
[15]
何仁洋, 张嗣伟. 塑料与橡胶材料磨损金属的研究进展[J]. 摩擦学学报, 2000, 20(3): 232-235. HE R Y, ZHANG S W. Advances in study on wear of metal by plastics and rubbers[J]. Tribology, 2000, 20(3): 232-235.
[16]
REN X Y, PENG Z J, HU Y B, et al. Abrasive wear behavior of TiCN cermets under water-based slurries with different abrasives[J]. Tribology International, 2013, 66(10): 35-43.
[17]
SCHALLAMACH A. Friction and abrasion of rubber[J]. Wear, 1958, 1(5): 384-417.
[18]
ZHANG S W. Investigation of abrasion of nitrile rubber[J]. Wear, 1984, 57(4): 769-778.
