LOU D, CUI K, JIA Y. Study on the machinability of resulfurized composite free-cutting steels[J]. Journal of Materials Engineering and Performance, 1997, 6(2): 215-218.
[2]
IWAMOTO T, MURAKAMI T.Bar and wire steels for gears and valves of automobiles-eco-friendly free cutting steel without lead addition[J]. JFE GIHO, 2004, (4): 64-69.
[3]
肖来荣, 张路怀, 舒学鹏, 等. 无铅锑黄铜轧制工艺的研究[J]. 材料工程, 2009, (1): 288-292. XIAO L R, ZHANG L H, SHU X P, et al. Research of rolling technique of unleaded brass containing stibium[J]. Journal of Materials Engineering, 2009, (1): 288-292.
[4]
WU D, LI Z. A new Pb-free machinable austenitic stainless steel[J]. Journal of Iron and Steel Research, International, 2010, 17(1): 59-63.
[5]
王昕,尹树春,贺磊,等. 0.05C-0.3Si-2.0Mn-xCe系钢液的洁净度与夹杂物变性行为[J]. 材料工程, 2013, (3): 42-50. WANG X, YIN S C, HE L, et al. The cleanliness and modification behavior of nonmetallic inclusions in 0.05C-0.3Si- 2.0Mn-xCe molten steel[J]. Journal of Materials Engineering, 2013, (3): 42-50.
[6]
LI Y, SUZUKI T, TANG N, et al. Microstructure evolution of SUS303 free-cutting steel during hot compression process[J]. Materials Science and Engineering: A, 2013, 583(7): 161-168.
[7]
王哲, 王发展, 王欣, 等. Fe-Pb合金凝固多相体系内偏析形成过程的三维数值模拟[J]. 物理学报, 2014, 63(7): 1011-10115. WANG Z, WANG F Z, WANG X, et al. Three-dimensional modelling of numerical simulation on segregation during Fe-Pb alloy solidification in a multiphase system[J]. Acta Physica Sinica, 2014, 63(7): 1011-10115.
[8]
王哲, 王发展, 何银花,等. Fe-Bi-Mn 三元合金多相相变-扩散体系中易切削相析出规律的数值研究[J]. 金属学报, 2014: 50(11): 1393-1402. WANG Z, WANG F Z, HE Y H, et al. Numerical study on free-cutting phase precipitation behavior in Fe-Bi-Mn ternary alloy multiphase transformation-diffusion system[J]. Acta Metallurgica Sinica, 2014: 50(11): 1393-1402.
[9]
NAZABAL J L, URCOLA J J, FUENTES M. Hot ductility of leaded free-cutting steels[J]. Metallography, 1984, 17(4): 439-453.
[10]
MURAKAMI Y, MINE K, USUKI H.Fatigue strength of annealed 0.45% carbon leaded-free-cutting steel[J]. Tetsuto Hagane, 1988, 74(6): 1113-1118.
[11]
BERNSMANN G, BLEYMEHL M, EHL R, et al. The making of free cutting steels with additions of lead, bismuth, tellurium, selenium and tin[J]. Stahl und Eisen, 2001, 121(2): 87-91.
[12]
KOUMOTO T, NISHI T, MORI M, et al.Development of non-lead-added free-cutting steel for automobile parts[J]. SAE Technical, 2004, 42(1): 1527-1538.
[13]
GUDURU R K, SCATTERGOOD R O, KOCH C C, et al. Mechanical properties of nanocrystalline Fe-Pb and Fe-Al2O3 [J]. Scripta Materialia, 2006, 54(11): 1879-1883.
[14]
ZHU M, GAO Y, CHUNG C Y, et al. Improvement of the wear behaviour of Al-Pb alloys by mechanical alloying[J]. Wear, 2000, 242(1): 47-53.
[15]
POURASIABI H M D, SAGHAFIAN H, POURASIABI H. Effect of austempering process on microstructure and wear behavior of ductile iron containing Mn-Ni-Cu-Mo[J]. Metals and Materials International, 2013, 19(1): 67-76.
[16]
王振生, 郭建亭, 周兰章, 等. NiAl-Cr (Mo)-Ho-Hf 共晶合金的高温磨损特性[J]. 金属学报, 2009, 45(3): 297-301. WANG Z S, GUO J T, ZHOU L Z, et al. High temperature wear behavior of NiAl-Cr(Mo)-Ho-Hf eutectic alloy[J]. Acta Metallurgica Sinica, 2009, 45(3): 297-301.
[17]
杨建恒, 张永振, 邱明, 等. Ti6Al4V高速干滑动摩擦磨损特性研究[J]. 材料工程, 2006, (1): 35-38. YANG J H, ZHANG Y Z, QIU M, et al.Wearing characteristic of Ti6Al4V in high dry sliding friction[J]. Journal of Materials Engineering, 2006, (1): 35-38.
