DAS S K, BYE R L, GILMAN P S. Large scale manufacturing of rapidly solidified aluminum alloys[J]. Materials Science and Engineering:A, 1991, 134:1103-1106.
[2]
KIM Y W. Advanced aluminum alloys for high temperature structural applications[J]. Industrial Heating, 1988, 5:31-34.
[3]
XIAO Y D, LI S R, XIE Y N. Consolidation processing and mechanical properties of rapidly solidified Al-Fe-Cr-Zr heat-resistant aluminum alloy[J]. Transactions of Nonferrous Metals Society of China, 1995, 5(2):128-131.
[4]
LEE S, LEE D Y, KIM N J. Correlation of microstructure and fracture toughness of a rapid solidification-powder metallurgy Al-Fe-V-Si alloy[J]. Materials Science and Engineering:A, 1991, 147:33-44.
[5]
李伟, 李沛勇.固/粉末冶金Al-Fe-Mo-Si/Zn-Al复合材料组织与性能的影响[J].航空材料学报, 2006, 26(2):12-15. LI Wei,LI Pei-yong. Effects of powder particle size on microstructure and properties of RS P/M Al-Fe-Mo-Si/Zn-Al composites[J]. Journal of Aeronautical Materials, 2006, 26(2):12-15
[6]
赵业青,李岩,鲁法云,等.7150铝合金热变形行为及微观组织[J].航空材料学报,2015,35(3):18-23. ZHAO Ye-qing, LI Yan, LU Fa-yun, et al. Flow stress behavior and microstructure of 7150 aluminum alloy during hot deformation[J]. Journal of Aeronautical Materials, 2015, 35(3):18-23.
[7]
马志峰,赵唯一,陆政.织构及组织结构对超高强铝合金平面力学性能的影响[J].航空材料学报,2015,35(3):1-6. MA Zhi-feng, ZHAO Wei-yi, LU Zheng. Impact of texture and microstructure on in-plane anisotropy of ultra-high strength aluminium alloy[J]. Journal of Aeronautical Materials, 2015, 35(3):1-6.
[8]
刘铭,汝继刚,臧金鑫,等.新型Al-Zn-Mg-Cu铝合金热稳定性研究[J].材料工程,2015,43(4):13-18. LIU Ming, RU Ji-gang, ZANG Jin-xin, et al. Thermal stability of new style Al-Zn-Mg-Cu aluminum alloy[J]. Journal of Materials Engineering, 2015, 43(4):13-18.
[9]
SAHOO K L, DAS S K, MURTY B S. Formation of novel microstructures in conventionally cast Al-Fe-V-Si alloys[J]. Materials Science and Engineering:A, 2003, 355:193-200.
[10]
YANEVA S, KALKANL A, PETROV K, et al. Structure development in rapidly solidified Al-Fe-V-Si ribbons[J]. Materials Science and Engineering:A, 2004, 373:90-98.
[11]
SKINNER D J, BYE R L, RAYBOULD D, et al. Dispersion strengthened Al-Fe-V-Si alloys[J]. Scripta Metallurgica, 1986, 20(6):867-872.
[12]
唐谊平,黎文献,谭敦强.FVS0812的制备与性能[J].铝加工,2003,(1):5-9. TANG Yi-ping, LI Wen-xian, TAN Dun-qiang. The preparation and properties of FVS0812[J]. Aluminium Fabrication, 2003,(1):5-9.
[13]
SKINNER D J, BYE R L, OKAZAKI K, et al. Aluminum-iron-vanadium alloys having high strength at elevated temperatures[P]. United States Patent:4715893, 1987.
[14]
CARRENO F, GONZALEZ-DONCEL G, RUANO O A. High temperature deformation behavior of an Al-Fe-V-Si alloy[J]. Materials Science and Engineering:A, 1993, 164:216-219.
[15]
唐谊平.快速凝固FVS0812合金的制备新工艺研究[D].长沙:中南大学,2004.
[16]
HARIPRASAD S, SASTRY S M L, JERINA K L. Deformation behavior of a rapidly solidified fine grained Al-8.5%Fe-1.2%V-1.7%Si alloy[J]. Acta Metallurgica, 1996, 44(1):383-389.
[17]
HARIPRASAD S, SASTRY S M L, JERINA K L. Deformation characteristics of the rapidly solidified Al-8.5%Fe-1.2%V-1.7%Si alloy[J]. Scripta Metallurgica, 1993, 29:463-466.
董寅生,沈军,杨英俊,等.快速凝固耐热铝合金的发展及展望[J].粉末冶金技术,2000,18(1):35-41. DONG Yin-sheng, SHEN Jun, YANG Ying-jun, et al. The development and trend of rapidly solidified high temperature aluminum alloys[J]. Powder Metallurgy Technology, 2000, 18(1):35-41.
[21]
CARRENO F, PEREZ-PRADO M T, GONZALEZ-DONCEL G, et al. Texture stability of a rapidly solidified dispersion strengthened Al-Fe-V-Si material[J]. Scripta Materialia, 1998, 38(9):1427-1433.
[22]
PARK W J, AHN S, KIM N J. Evolution of microstructure in a rapidly solidified Al-Fe-V-Si alloy[J]. Material Science and Engineering:A, 1994, 189:291-299.
[23]
TAN D Q, LI W X, XIAO Y D, et al. Phase transition of Al-Fe-V-Si heat-resistant alloy by spray deposition[J]. Transactions of Nonferrous Metals Society of China, 2003, 13(3):568-573.
[24]
谭敦强,唐建成,黎文献,等.冷却速度对Al-8.5Fe-1.3V-1.7Si合金主要相组成的影响[J].中国有色金属学报,2005,15(8):1226-1230. TAN Dun-qiang, TANG Jian-cheng, LI Wen-xian, et al. Effect of cooling rate on primary phase constitutes of Al-8.5Fe-1.3V-1.7Si alloy[J]. The Chinese Journal of Nonferrous Metals, 2005, 15(8):1226-1230.
[25]
谭敦强,黎文献,陈伟.熔体温度、冷却速率对Al-Fe-V-Si耐热铝合金组织和力学性能的影响[J].航空材料学报,2006,26(5):14-17. TAN Dun-qiang, LI Wen-xian, CHEN Wei. Effect of melt temperature and cooling rate on microstructure and mechanical properties of Al-Fe-V-Si heat-resistant aluminum alloy[J]. Journal of Aeronautical Materials, 2006, 26(5):14-17.
[26]
TAN D Q, LI W X, XIAO Y D, et al. Preparation of FVS1212/FVS0812 materials and its mechanical properties[J]. Journal of Central South University of Technology, 2005, 12(5):503-506.
朱宝宏,熊柏青,张永安,等.喷射成形Al-8.5Fe-1.1V-1.9Si耐热铝合金的组织演变及性能分析[J].稀有金属,2004,28(1):185-190. ZHU Bao-hong, XIONG Bai-qing, ZHANG Yong-an, et al. Microstructure and evolution and mechanical properties heat-resistant Al-8.5Fe-1.1V-1.9Si alloy prepared by spray forming process[J]. Chinese Journal of Rare Metals, 2004, 28(1):185-190.
[29]
DAVIES H A. Processing, properties and applications of rapid solidified advanced alloy powders[J]. Powder Metallurgy, 1990, 33(1):223-230.
[30]
朱宝宏,张永安,刘红伟,等.原位自生TiC颗粒对Al8.5Fe 1.4V1.7Si耐热铝合金的组织及性能的影响[J].材料科学与工程学报,2006,24(1):36-39. ZHU Bao-hong, ZHANG Yong-an, LIU Hong-wei, et al. Effects of in-situ TiC particles on the microstructures and mechanical properties of Al8.5Fe1.4V1.7Si aluminum alloy[J]. Journal of Materials Science & Engineering, 2006, 24(1):36-39.
[31]
孙玉峰,张国胜,沈宁福,等.原位生成TiC对快凝Al-Fe-V-Si合金中"块状相"生成的影响[J].金属学报,2001,37(11):1193-1197. SUN Yu-feng, ZHANG Guo-sheng, SHEN Ning-fu, et al. Effect of in situ TiC particles on the formation of clump-like phases in rapidly solidified Al-Fe-V-Si alloys[J]. Acta Metallurgica Sinica, 2001, 37(11):1193-1197.
[32]
胡敦芫,黄赞军,杨滨,等.喷射成形原位反应TiC/Al-Fe-V-Si复合材料的显微组织[J].北京科技大学学报,2003,25(2):152-155. HU Dun-yuan, HUANG Zan-jun, YANG Bin, et al. Microstructure characteristic of in-situ TiC/Al-Fe-V-Si composites prepared by spray forming[J]. Journal of University of Science and Technology Beijing, 2003, 25(2):152-155.
[33]
HAMBLETON R, JONES H, RAINFORTH W M. Effect of alloy composition and reinforcement with silicon carbide on the microstructure and mechanical properties of three silicon carbide dispersion strengthened aluminium alloys[J]. Materials Science and Engineering:A, 2001, 304-306:524-528.
[34]
贺毅强,屠宏,冯立超,等.喷射沉积SiCp/Al-8.5Fe-1.3V-1.7Si热暴露过程的显微组织演变[J].航空材料学报,2012,32(5):54-59. HE Yi-qiang, TU Hong, FENG Li-chao, et al. Microstructure evolution of spray deposited SiCp/Al-8.5Fe-1.3V-1.7Si during exposure at elevated temperatures[J]. Journal of Aeronautical Materials, 2012, 32(5):54-59.
[35]
HE Y Q, QIAO B. A study on interfacial structure of spray-deposited SiCp/Al-Fe-V-Si composite[J]. Advanced Composites Letters, 2009, 18(4):137-142.
[36]
PENG L M, ZHU S J, MA Z Y, et al. High temperature creep deformation of Al18B4O33 whisker-reinforced 8009 Al composite[J]. Material Science and Engineering:A, 1999, 265:63-70.
[37]
KHATRI S C, LAWLEY A, KOCZAK M J, et al. Creep and microstructural stability of dispersion strengthened Al-Fe-V-Si-Er alloy[J]. Material Science and Engineering:A, 1993,167(1-2):11-21.
[38]
肖于德,黎文献,李松瑞, 等.稀土Er对FVS0812合金组织性能的影响[J].中南工业大学学报,1997,28(5):461-464. XIAO Yu-de, LI Wen-xian, LI Song-rui, et al. Effect of rare-earth element erbium on microstructure and mechanical properties of FVS0812 alloy[J]. Journal of Central South University of Technology, 1997, 28(5):461-464.
[39]
WANG J Q, TSENG M K, HAO Y Y, et al. An investigation of the microstructure and mechanical behavior of novel nanocrystalline Al-Fe-V-Si-Mm alloy ribbons[J]. Materials Science and Engineering:A, 1998, 247:51-57.
[40]
张林林,肖于德,周娟,等.添加Mg和Cu对Al-Fe-V-Si合金组织与性能的影响[J].中国有色金属学报,2006,16(5):874-880. ZHANG Lin-lin, XIAO Yu-de, ZHOU Juan, et al. Effects of adding Mg and Cu elements on microstructure and mechanical properties of Al-Fe-V-Si alloy[J]. The Chinese Journal of Nonferrous Metals, 2006, 16(5):874-880.
[41]
SAHOO K L, SIVARAMAKRISHNAN C S, CHAKRABARTI A K. The effect of Mg treatment on the properties of Al-8.3Fe-0.8-0.9Si alloy[J]. Journal of Materials Processing Technology, 2001, 112:6-11.
[42]
张林林,肖于德,周娟,等.Be对铸态Al-Fe-V-Si合金组织及性能的影响[J].铸造,2006,55(1):65-68. ZHANG Lin-lin, XIAO Yu-de, ZHOU Juan, et al. Effects of Be on microstructures and mechanical properties of as-cast Al-Fe-V-Si alloys[J]. Foundry, 2006, 55(1):65-68.
[43]
WARNG P S, LIAUH Y J, LEE S L, et al. Effects of Be addition on microstructures and mechanical properties of B319.0 alloys[J]. Materials Chemistry and Physics, 1998, 53(3):195-202.
[44]
TANG Y P, TAN D Q, LI W X, et al. Preparation of Al-Fe-V-Si alloy by spray co-deposition with added its over-sprayed powders[J]. Journal of Alloys and Compounds, 2007, 439:103-108.
[45]
刘克明,陆德平,杨滨,等.快速凝固耐热铝合金的现状与进展[J].材料导报,2008,22(2):57-60. LIU Ke-ming, LU De-ping, YANG Bin, et al. Present status and development of rapid-solidified heat resistant aluminum alloys[J]. Materials Review, 2008, 22(2):57-60.
