BARNETT M R, JONAS J J. Distinctive aspects of the physical metallurgy of warm rolling[J]. ISIJ Inter, 1999,39(9):856-873.
[2]
JONAS J J, WEISS I. Effect of precipitation on recrystallization in microalloyed steels[J]. Mater Sci Technol, 1979,13(3):238-245.
[3]
LUTON M J, DORVEL R, PETKOVIC R A. Interaction between deformation, recrystallization and precipitation in niobium steels[J]. Metall Mater Trans A, 1980, 11(3):411-420.
[4]
KASPAR R, DISTL J S, PAWELSKI O. Extreme austenite grain refinement due to dynamic recrystallization[J]. Steel Res, 1988,59(9):421-425.
[5]
HONG S C, LIM S H, LEE K J, et al. Effect of undercooling of austenite on strain induced ferrite transformation behavior[J]. ISIJ Inter, 2003,43(3):394-399.
[6]
MATSUMURA Y, YADA H. Evolution of ultrafine-grained ferrite in hot successive deformation[J]. ISIJ Inter, 1987,27(6):492-498.
[7]
NAJAFI-ZADEH A, JONAS J J, YUE S. Grain refinement by dynamic recrystallization during the simulated warm-rolling of interstitial free steels[J]. Metall Trans A,1992, 23(9):2607-2617.
[8]
ISHIKAWA T, NOMIYAMA Y, YOSHIKAWA H, et al.Ultra-high crack-arresting steel plate(HIAREST) with super-refined grains in surface layers[J]. Nippon Steel Tech Rep,1997, 75(11):31-42.
[9]
MABUCHI H, HASEGAWA T, ISHIKAWA T. Metallurgical features of steel plates with ultra fine grains in surface layers and their formation mechanism[J]. ISIJ Inter,1999, 39(5):477-485.
[10]
姚连登,李自刚,张丕军.超细晶粒及超高韧性厚板的研究[J].钢铁钒钛,2005,26(1):20-25. YAO Lian-deng, LI Zi-gang, ZHANG Pi-jun. Research on ultra-fine grain and ultra-high toughness steel plate[J]. Iron Steel Vanadium Titanium, 2005,26(1):20-25.
[11]
DíAZ-FUENTES M, IZA-MENDIA A, GUTIéRREZ I. Analysis of different acicular ferrite microstructures in low-carbon steels by electron backscattered diffraction. Study of their toughness behavior[J]. Metall Mater Trans A, 2003, 34(11):2505-2516.
[12]
TAMURA I. Some elementary steps in the thermomechanical processing of steels[J]. Tetsu-to-Hagane, 1988,74(1):18-35.
[13]
高维林,白光润,栾瑰馥,等.金属热变形中动态再结晶的临界判据[J].东北工学院学报, 1993, 14(1):49-53. GAO Wei-lin, BAI Guang-run, LUAN Gui-fu, et al. A criterion for dynamic recrystallization in metals's hot working[J]. J Northeast University Technol, 1993, 14(1):49-53.
[14]
高飞,徐有荣.Cr25Ti铁素体钢转动形核的动态再结晶机制[J]. 金属学报, 1988, 24(3):195-200. GAO Fei, XU You-rong. Mechanism of dynamic rotation recrystallization in Cr25Ti ferrite stainless steel[J].Acta Metall Sinica, 1988, 24(3):195-200.
[15]
周晓光,刘振宇,吴迪,等. FTSR热轧含Nb钢动态再结晶数学模型中参数的确定[J].金属学报, 2008,44(10):1188-1192. ZHOU Xiao-guang, LIU Zhen-yu, WU Di, et al. Determination of model parameters of dynamic recrystallization for Nb bearing steels during flexible thin slab rolling[J]. Acta Metall Sin,2008, 44(10):1188-1192.
[16]
GLOVER G, SELLARS C M. Recovery and recrystallization during high temperature deformation of α-iron[J].Metall Trans, 1973, 4(3):765-775.
[17]
李龙飞,杨王玥,孙祖庆,等. 低碳钢铁素体相区变形特性[J]. 北京科技大学学报,2001,23(3):225-229. LI Long-fei, YANG Wang-yue, SUN Zu-qing, et al. Deformation characteristics of a plain carbon steel in ferrite phase range[J].J University Sci Technol Beijing, 2011,23(3):225-229.
