全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...
材料工程  2005 

钛合金的氢处理技术及其对超塑性的影响

, PP. 60-64

Keywords: 钛合金,氢处理,超塑性,变形机理

Full-Text   Cite this paper   Add to My Lib

Abstract:

氢处理技术是通过氢的可逆合金化作用,对钛合金的微观组织、力学性能和加工性能进行调整的一种新兴热加工技术.钛合金中氢的加入可以增加钛合金中塑性相的体积分数,降低流动应力,提高超塑性性能,从而降低钛合金的超塑性变形对变形速率和变形温度的苛刻要求.利用氢处理与塑性变形相配合制备晶粒尺寸小于1μm的超细晶,使钛合金在更低的变形温度和更高变形速率下呈现出超塑性,是攻克钛合金扩大应用瓶颈的一条新途径.

References

[1]  侯红亮,李志强,王亚军,等.钛合金热氢处理技术及其应用前景[J].中国有色金属学报,2003,13(3):533-549.
[2]  ELIAZ N,ELIEZER D,OLSON D L.Hydrogen-assisted processing of materials[J].MSE,2000,A289:41-53.
[3]  丁桦,王殿梁,宋丹,等.氢对Ti3Al-Nb合金微观组织和超塑变形行为的影响[J].钢铁研究学报,2000,12(2):45-48.
[4]  丁桦.Ti-Al金属化合物的超塑性研究[D].沈阳:东北大学,2000.
[5]  ZHANG S Q,ZHAO L R.Effect of hydrogen on the superplasticity and microstructure of Ti-6Al-4V alloy[J].Journal of Alloys and Compounds,1995,218(2):233-236.
[6]  高文,张少卿.氢对TC11合金超塑性的影响[J].稀有金属,1992,16(3):227-230.
[7]  林天辉.钛合金中的氢及其对力学性能的影响[D].北京:北京科技大学,1990.
[8]  张少卿.氢在钛合金热加工中的作用[J].材料工程,1992,(2):24-29.
[9]  孙新军,顾家琳,代冰,等.原始组织结构对压缩变形制备超细晶钛合金的影响[J].金属热处理,2000,(2):15-18.
[10]  潘峰,张少卿,薛志痒,等.铸造钛合金的氢处理细化晶粒的研究[J].航空学报,1987,8(1):A77-A82.
[11]  ZHANG S Q,PAN F.Hydrogen treatment of titanium of Ti-6Al-4V[J].Chin J Met Sci Technol,1990,(6):187-192.
[12]  徐振声,宫波,赖祖涵,等.用氢细化Ti-6Al-4V合金显微组织的研究[J].有色矿冶,1990,(2):45-48.
[13]  宫波,赖祖涵,新家光雄小林俊郎.用热化学处理改善(α+β)型钛合金的组织和力学性能[J].中国有色金属学报,1994,4(3):86-88.
[14]  杜忠权,王高潮,陈玉秀.渗氢处理细化Ti-10V-12Fe-3Al合金组织及改善其超塑性性能的效果[J].航空学报,1994,15(7):882-886.
[15]  SERGUEEVA A V,STOLYAROV V V,VALIEV R Z,et al.Superplastic behaviour of ultrafine-grained Ti-6Al-4V alloys[J].MSE,2002,A323:318-325.
[16]  IMAYEV R,GABDULLIN N,SALISHCHEV G.Effect of grain size on the superplasticity of an intermatallic Ti3Al compound[J].Intermetallics,1997,(5):229-236.
[17]  YOSHIMURA H,NAKAHIGASHI J.Tesile and impact properties of mesoscopic-grained α+β-type titanium alloys obtained through hydrogen treatments[J].Journal of Alloys and Compounds,1999,293-295:858-861.
[18]  朱康英.α+β钛合金特细等轴晶粒的细化和机械性能的改善[J].钛工业进展,1995,(2):25.
[19]  吴全兴.氢处理制备超细晶α+β钛合金的性能[J].钛工业进展,1998,(1):34.
[20]  ELIEZER D,ELIAZ N,SENKOV O N,et al.Positive effects of hydrogen in metals[J].MSE,2000,A280:220-224.
[21]  SENKOV O N,FRONES F H,et al.Thermohydrogen processing of titanium alloys[J].International Journal of Hydrogen Energy,1999,24(6):565-576.
[22]  KERR W R,SMITH P R.Hydrogen as alloying element in titanium[A].Titanium'80 Science and Technology,Proceeding of the 4th International Conference on Titanium[C].1986.2477-2486.
[23]  LEDERICH R J,SASTRY S M.Influence of hydrogen addition on high temperature superplasticity of titanium alloy[A].Advanced Processing Method for Titanium[C].1982.115-128.
[24]  丁桦,杜云惠,路贵民,等.氢对Ti3Al基合金组织和超塑性能的影响[J].中国有色金属学报,1998,8(S2):341-344.
[25]  YOSHIMURA H,NAKAHIGASHI J.Ultra-fine-grain refinement and superplasticity of titanium alloys obtained through protium treatment[J].International Journal of Hydrogen Energy,2002,27(7-8):769-774.
[26]  MURZINOVA M A,SALISHCHEV G A,AFONICHEV D D.Formation of nanocrystalline structure in two-phase titanium alloy by combination of thermohydrogen processing with hot working[J].International Journal of Hydrogen Energy,2002,27(7-8):775-782.

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133