全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...
材料工程  2005 

热处理工艺对包套挤压镍微合金化TiAl合金组织与性能的影响

, PP. 37-40

Keywords: TiAl合金,包套挤压,再结晶,拉伸性能

Full-Text   Cite this paper   Add to My Lib

Abstract:

以包套挤压镍微合金化TiAl合金为研究对象,研究了热处理工艺对合金组织和室温、800℃拉伸性能的影响。结果表明,70%变形量包套挤压合金经(α+γ)双相区1250℃热处理获得了再结晶完全的双态组织,其中不含有残留的层片结构;挤压合金经(α2+γ)双相区退火处理后,合金室温拉伸屈服强度为535MPa,抗拉强度为650MPa,延伸率为3%;800℃拉伸屈服强度为365MPa,抗拉强度为400MPa,延伸率为156%,这种组织有利于进一步加工成形,使超塑成形成为可能。

References

[1]  TONES S A, FAUFMAN M J. Phase equilibria and transformations in intermediate titanium aluminum alloys[J]. J Acta Metall Mater, 1993, 41(2): 387-398.
[2]  ZHONG Z Y, ZHANG J, LI S Q, et al. Microstructure modifications of wrought and cast TiAl alloys[J]. Trans Nonferrous Met Soc China, 1999, 9(S1):188-193.
[3]  YAMAGUCHI M, INUI H, ITO K. High temperature structural intermetallics[J]. Acta Mater, 2000,48:307-322.
[4]  SEETHARAMAN V, SEMIATIN S L. Plastic flow and microstructure evolution during hot deformation of a gamma titanium aluminide alloy[J]. J Metall Mater Trans A, 1997, 28A: 2309-2321.
[5]  YUAN Zhi-shan, CHEN Sui-yuan, HAN Peng-biao, et al. The effect of heat treatment on microstructures and properties of near-isothermally forged TiAl alloy containing minor Ni[J].Transactions of Materials and Heat Treatment[J].2004,25(5):256-259.
[6]  ZHANG J, LI S Q,ZHOU D X, et al. Recent advances of wrought TiAl alloys[J]. Trans Nonferrous Met Soc China, 2002, 12(4):592-595.
[7]  KIM YOUNG-WON. Microstructure evolutions and mechanical properties of a forged gamma titanium aluminium alloy[J]. J Acta Metall Mater,1992,40(6):1121-1134.
[8]  ZHANG W J, LORENZ U, APPEL F. Recovery, recrystallization and phase transformations during thermomechanical processing and treatment of TiAl-based alloys[J]. J Acta Mater,2000,48(11):2803-2813.

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133