ACEE composites project office.NASA/Aircraft industry standard specification for graphite fiber/toughened thermoset resin composite material[R].NASA RP 1142.1985.
[2]
SACMA SRM 2R-88,SACMA recommended test method for compression after impact properties of oriented fiber-resin composites[S].
[3]
ILCEWICZ L B,DOST E F,COGGESHALL R L.A model for compression after impact strength evaluation[A].Proc of the 21st International SAMPE Technical Conference[C].1989.130-140.
[4]
LAGACE P A,RYAN K F,GRAVES M J.Effect of damage on the impact response of composite laminates[C].AIAA-91-1079-CP,1991.
[5]
JACKSON W C,POE C C JR.The use of impact force as a scale parameter for the impact response of composite laminates[A].NASA TM-104189.Proc of 9th DOD/NASA/FAA Conference on Fibrous Composites in Structural Design Vol 2,1992[C].981-998.
[6]
LAGACE P A,WILLIAMS J E,TSANG P H W.A prelimi-nary proposition for a test method to measure (impact) damage resistance[J].Journal of Reinforced Plastics and Composites,1993,12:585-601.
[7]
DOST E F,AVERY W B,FINN L B,et al.Impact damage resistance of composite fuselage structure[A].Part 3 Paper Presented at Fourth ACT Conference[C].Seattle Wash:Boeing Commercial Airplane Group,1993.
[8]
National research council.New materials for next-generation commercial transport[M].Washington D C:National Academy Press,1996.
[9]
ASTM D6264-98(04),Standard test method for measuring damage resistance of fiber-reinforced polymer matrix composite to concentrated quasi-static indentation force[S].
[10]
ASTM D7136-05,Standard test method for measuring damage resistance of fiber-reinforced polymer matrix composite to a drop-weight impact event[S].
[11]
TOSHIO ABE,KENGO HAYASHI,FUMIHITO TAKEDA,et al.A VARTM for primary aircraft structures[A].Proc of the 26th International SAMPE European Conference 2005 SAMPE[C].Paris,April 5-7 2005.379-384.
[12]
LEE S M AND ZAHUTA P.Instrumented impact and static indentation of composites[J].Journal of Composite Materials,1991,25:204-222.
[13]
POE C C JR.Demonstrating damage tolerance of composite airframes[R].N94-29623,1994.
[14]
ASTM D7137-05,Standard test method for compressive residual strength properties of damaged polymer matrix composite plates[S].
[15]
YANG Xu,SHEN Zhen,YAN Ying,et al.New methodology for evaluating toughness of composite laminates-investigation of damage resistance[J].Chinese Journal of Aeronautics,2003,16 (2):73-79.
[16]
SHEN Z,YANG S C,FU S Y,et al.Characterization of damage resistance and damage tolerance of composite materials[A].Composites Technologies for 2020[C].Cambridge England:Woodhead Publishing Ltd,2004.
[17]
SHEN Z,ZHANG Z L,YANG S C,et al.Characterization of damage resistance and damage tolerance behavior of composite laminates(in Chinese)[J].ACTA MATERIAE COMPOSITAE SINICA,2004,21(5):140-145.
[18]
SHEN Z,YANG S C.Experimental study on behavior characterization of composite laminates against impact (in Chinese)[A].Advance and Its Application of Solid Mechanics[C].Hefei:University of Science and Technologyof China Press,2005.
[19]
CHEN Pu-hui,SHEN Zhen.Failure mechanisms of laminated composites subjected to static indentation[J].Journal of Composite Structures,2006,75 (1-4):in press.
[20]
SHEN Z,YANG S C.Knee point phenomenon of composites withstanding to impact and its physical meaning (in Chiness)[A].Proc of NCCM-14[C].Yichang,2006.
