全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...
材料工程  2007 

B4C/TiC/Mo陶瓷复合材料的力学性能和微观结构

, PP. 42-46

Keywords: B4C,TiC,Mo,陶瓷复合材料,微观结构

Full-Text   Cite this paper   Add to My Lib

Abstract:

采用热压法制备了B4C/TiC/Mo陶瓷复合材料,分析了烧结工艺和TiC含量对B4C/TiC/Mo陶瓷复合材料力学性能和显微结构的影响。当烧结参数为1900℃,45min,35MPa时,85.3%(质量分数,下同)B4C/10%TiC/4.7%Mo陶瓷复合材料的抗弯强度、韧性、硬度和相对密度分别为705MPa,3.82MPa·m1/2,20.6GPa,98.2%。添加的TiC在烧结过程中与B4C发生化学反应生成了TiB2,利用生成的TiB2与添加的Mo协同增韧补强B4C/TiC/Mo陶瓷复合材料。

References

[1]  ZHEN Yu-hua,LI Ai-ju,YIN Yan-sheng,et al.Reactive and dense sintering of reinforced-toughened B4C matrix composites[J].Materials Research Bulletin,2004,39:1615-1625.
[2]  SCHWETZ K A,GRELLNER W.The influence of carbon on the microstructure and mechanical properties of sintered boron carbide[J].Journal of the Less Common Metals,1981,82:37-47.
[3]  LIU Ning,HU Zhen-hua,CUI Kun.Effect of molybdenum element in particle composite material-ceramets[J].Rare Metal Materials and Engineering,1994,23(3):45-48.
[4]  XU Yu-dong,LIU Ning,SHI Ming.Effects of Mo addition on microstructure of nano modified cermets[J].Mining and Metallurgical Engineering,2005,5(2):77-80.
[5]  孙德明,刘立红,鹿晓阳,等.Al2O3/Cr3C2/(W,Ti)C陶瓷材料的力学性能及微观结构[J].硅酸盐学报,2005,33(4):411-412.
[6]  唐国宏,陈昌麟,张兴华.B4C-TiB2-W2B5复合材料研究[J].航空学报,1994,15(6):761-764.
[7]  SUZUYA YAMADA,KIYOSHI HIRAO,YUKIHIKO YAMAUCHI,et al.B4C-CrB2 composites with improved mechanical properties[J].Journal of the European Ceramic Society,2003,23:561-565.
[8]  FRANCOIS THEVENOT.Boron carbide-a comprehensive review[J].Journal of the European Ceramic Society,1990,6(4):205-225.
[9]  DENG Jian-xin,ZHOU Jun,FENG Yi-hua,et al.Microstructure and mechanical properties of hot-pressed B4C/(W,Ti)C ceramic composites[J].Ceramics International,2002,28:425-430.
[10]  ALIZADEH A,TAHERI-NASSAJ E,EHSANI N.Synthesis of boron carbide powder by a carbothermic reduction method[J].Journal of the European Ceramic Society,2004,24 (10-11):3227-3234.
[11]  SIGL L S.Processing and mechanical properties of boron carbide sintered with TiC[J].Journal of the European Ceramic Society,1998,18:1521-1529.
[12]  KUSTAS F,MISHRA B,ZHOU J.Wear behavior of B4C-Mo co-sputtered wear coatings[J].Surface and Coatings Technology,2001,141(] ):48-54.
[13]  HUANG Qi-zhong,YANG Qiao-qin,DU Hai-qing,et al.Effect of TiC on the microstructure and properties of C-B4C-SiC composite[J].Carbon,1995,2:9-13.
[14]  KARL A SCJWETZ,LORENZ S SIGL,LOTHAR PFAU.Mechanical properties of injection molded B4C-C ceramics[J].Journal of Solid State Chemistry,1997,133:68-76.
[15]  KNUDSEN F P.Dependence of the mechanical properties of brittle polycrystalline specimens on porosity and grain size[J].J Am Ceram Soc,1959,42:376-387.
[16]  COBLE R L,KINGERY W D.Effect of porosity on physical properties of sintered alumina[J].J Am Ceram Soc,1956,39:377-385.

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133