全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...
材料工程  2007 

BNi82CrSiB钎料钎焊DD6单晶合金接头组织及力学性能研究

, PP. 3-6

Keywords: 真空钎焊,BNi82CrSiB钎料,单晶合金

Full-Text   Cite this paper   Add to My Lib

Abstract:

采用BNi82CrSiB钎料在1070℃/15min规范下对DD6单晶合金进行了真空钎焊实验研究.获得了致密完整的钎焊接头,钎料元素未向母材扩散.钎焊接头在750℃的抗拉强度为400MPa左右,750℃/100h持久强度可达100MPa.钎焊接头的失效断裂源自焊缝中间的化合物相上,断口呈脆性断裂特征.

References

[1]  GB10859-89,镍基钎料[S].
[2]  中国航空材料手册编辑委员会.中国航空材料手册第2卷变形高温合金铸造高温合金[M].第2版.北京:中国标准出版社,2002.
[3]  李嘉荣,钟振纲,唐定中,等.低成本第二代单晶高温合金DD6[J].金属学报,1999,35(增刊2):S266-S269.
[4]  LI J R,ZHONG Z G,TANG D Z,et al.A low-cost second generation single crystal superalloy DD6[A].Superalloys 2000[C].Warrendale,PA:The Minerals,Metals&Materials Society,2000.777-783.
[5]  BROOMFIELD R W.Development of brazing techniques for the joining of single crystal components[A].Fifth International Charles Parsons Turbine Conference[C].Cambridge:Cambridge University Press,2000.741-754.
[6]  MIGLIETTI W M,PENNEFATHER R C.Microstructure,mechanical properties and coatability of diffusion brazed CMSX-4 single crystal[A].Proceedings from Materials Solutions'97 on Joining and Repair of Gas Turbine Components[C].Materials Park,Ohio:ASM International,1997.61-77.
[7]  NISHIMOTO K,SAIDA K,KIM D,et al.Homogenization behavior of alloying elements during transient liquid phase bonding[J].Quarterly Journal of the Japan Welding Society,1997,15(3):509-514.
[8]  李晓红,毛唯,郭万林,等.DD6单晶合金过渡液相扩散焊工艺[J].焊接学报,2005,26(4):51-54.
[9]  张启运,庄鸿寿.钎焊手册[M].北京:机械工业出版社,1998.
[10]  TUNG S K,LIM L C,LAI M O.Solidification phenomena in nickel base brazes containing boron and silicon[J].Scripta Materialia,1996,34(5):763-769.
[11]  庄鸿寿,罗格夏特 E.高温钎焊[M].北京:国防工业出版社,1989.
[12]  毛唯,何剑雄,叶雷,等.BNi82CrSiB钎料钎焊K403合金接头的性能[A].第十一次全国焊接会议论文集(第1册)[C].上海:中国机械工程学会焊接分会,2005.38-40.

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133