全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...
材料工程  2007 

T91铁素体耐热钢过冷奥氏体转变过程中临界冷却速度的研究

Keywords: 差分膨胀仪,T91铁素体耐热钢,过冷奥氏体,临界冷却速度

Full-Text   Cite this paper   Add to My Lib

Abstract:

利用DIL805A/D高精度差分膨胀仪,通过线膨胀行为测量与微观组织分析,获得T91铁素体耐热钢连续冷却转变过程中相关动力学信息,结合冷却后T91钢组织特征,确定了T91钢过冷奥氏体转变过程中的临界冷却速度。研究表明T91钢过冷奥氏体连续冷却过程中只存在铁素体和马氏体转变区,而不出现贝氏体和珠光体转变。在冷却速度为10K/min时该钢获得完全板条马氏体组织,9K/min时组织中开始出现铁素体,即10K/min可以定为T91钢奥氏体向马氏体转变的上临界冷却速度;当冷却速度介于3~9K/min时为马氏体和铁素体的混合组织,冷却速度为2K/min时T91钢中不存在马氏体转变,室温组织为铁素体,即2K/min可以定为T91钢奥氏体向马氏体转变的下临界冷却速度。

References

[1]  WATANABE T,TABUCHI M,YAMAZAKI M,et al.Creep damage evaluation of 9Cr-1Mo-V-Nb steel welded joints showing type IV fracture[J].International Journal of Pressure Vessels and Piping,2006,83(1):63-71.
[2]  SAWADA K,OHBA T,KUSHIMA H.Effect of microstructure on elastic property at high temperatures in ferritic heat resistant steels[J].Materials Science and Engineering,2005,394(1-2):36-42.
[3]  LAVERDE D,GOMEZ-ACEBO T,CASTRO F.Continuous and cyclic oxidation of T91 ferritic steel under steam[J].Corrosion Science,2004,46(3):613-617.
[4]  GUPTA G,JIAO Z,HAM A N.Microstructural evolution of proton irradiated T91[J].Journal of Nuclear Materials,2006,351(1-3):162-173.
[5]  YI Y,LEE B,KIM S.Corrosion and corrosion fatigue behaviors of 9Cr steel in a supercritical water condition[J].Materials Science and Engineering,2006,429(1):161-168.
[6]  MACKENZIE M,CRAVEN A J,COLLINS C L.Nanoanalysis of very fine VN precipitates in steel[J].Scipta Materialia,2006,54(1):1-5.
[7]  OORO J.Weld metal microstructure analysis of 9%-12% Cr steels[J].International Journal of Pressure Vessels and Piping,2006,83(7):540-545.
[8]  KLUEH L,HASHIMOTO N,MAZIASZ P J.Development of new nano-particle-strengthened martensitic steels[J].Scripta Materialia,2005,53(3):275-280.
[9]  AGAMENNONE R,BLUM W,GUPTA C.Evolution of microstructure and deformation resistance in creep of tempered martensitic 9-12%Cr-2%W-5%Co steels[J].Acta Materialia,2006,54(11):3003-3014.
[10]  TANEIKE M,ABE F,SAWADA K.Creep-strengthening of steel at high temperatures using nano-sized carbonitribe dispersions[J].Nature,2003,424(5):294-296.
[11]  YOSHINO M,MISHIMA Y,TODA Y,et al.Phase equilibrium between austenite and MX carbonitride in a 9Cr-1Mo-V-Nb steel[J].ISIJ International,2005,89(1):107-115.
[12]  GUPTA G,WAS G S.The role of grain boundary engineering on the high temperature of ferritic-martensitic alloy T91[J].Journal of ASTM International,2005,58(2):1-11.
[13]  ABE F,HORIUCHI T,TANEIKE M.Stabilization of martensitic microstructure in advanced 9Cr steel during creep at high temperature[J].Materials Science and Engineering,2004,A378:299-303.
[14]  LIU Y C,SOMMER F,MITTEMEIJER E J.Abnormal austenite ferrite transformation behaviour in substitute Fe-base alloys[J].Acta Mater,2003,58(2):507-513.
[15]  姚可夫,钱滨,石伟,等.马氏体回火过程中组织转变量预测的实验研究[J].金属学报,2003,39(8):892-896.
[16]  胡光立,谢希文.钢的热处理[M].西安:西北工业大学出版社,1993.
[17]  徐祖耀.马氏体相变与马氏体[M].北京:科学出版社,1999.
[18]  TAMURA M,IIDA H,ESAKA H,et al.Solubility product of VN in austenite of high Cr heat resistant steel[J].ISIJ International,2003,43(11):1807-1813.

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133