KIM H K,KIM W J.Micro-structural instability and strength of an AZ31 Mg alloy after severe plastic deformation[J].Materials Science and Engineering,2004,A 385:300-308.
[2]
WEILER J P,WOOD J T,KLASSEN R J,et al.The effect of grain size on the flow stress determined from spherical micro-indentation of die-cast magnesium AM60B alloy[J].Journal of Materials Science,2005,9:1-7.
[3]
TAN J C,TAN M J.Super-plasticity and grain boundary sliding characteristic in two stage deformation of Mg-3Al-1Zn alloy sheet[J].Materials Science and Engineering,2003,A339:81-89.
[4]
BEER A G,BARNETT M R,KAPLAN H I.Magnesium Technology 2002[C].Warrendale,PA:TMS,2002.193.
[5]
KOICHI ISHIKAWA,HIROYUKI WATANABE,TOSHIJI MUKAI.High strain rate deformation behavior of an AZ91 magnesium alloy at elevated temperatures[J].Materials Letters,2005,59:1511-1515.
[6]
El-MAGD E,ABOURIDOUANE M.Characterization,modeling and simulation of deformation and fracture behavior of the light-weight wrought alloys under high rate loading[J].Impact Engineering,2006,32:741-758.
[7]
MUKAI T,MOHRI T,MABUCHI M,et al.Experimental study of a structural magnesium alloy with high absorption energy under dynamic loading[J].Scripta Materialia,1998,39(9):1249-1253.
[8]
VAGARALI S S,LANGDON T G.Dislocation analysis on plastic deformation of pure magnesium[J].Acta Metall,1981,29:1969-1981.
[9]
TROJANOVA Z,LUKAC P,MILICKA K,et al.Characterisation of dynamic ageing in tow magnesium alloys[J].Materials Science and Engineering,2004,A387-389:80-83.
[10]
TROJANOVA Z,LUKAC P.Compressive deformation behavior of magnesium alloys[J].Journal of Materials Processing Technology,2005,162-163:416-421.
[11]
MATHIS K,TROJANOVA Z,LUKAC P.Modeling of hardening and softening processes in Mg alloys[J].Journal of Alloys and Compounds,2004,378:176-179.
[12]
REGEV M,AGHION E,BERGER S,et al.Dislocation analysis of crept AZ91D ingot castings[J].Materials Science and Engineering,1998,A257:349-352.
[13]
黄克智,王自强.材料的宏微观力学与强韧化设计[M].北京:清华大学出版社,2004.92-113.
[14]
CATO DORUM.An experimental study on the energy absorption capacity of thin walled castings[J].International Journal of Impact Engineering,2006,32(5):702-724.
[15]
RAVI KUMAR N V,BLANDIN J J,DESRAYAUD C,et al.Grain refinement in AZ91 magnesium alloy during thermo-mechanical processing[J].Materials and Engineering,2003,A 359:150-157.
AGNEW S R,MEHROTRA P,LILLO T M,et al.Texture evolution of five wrought magnesium alloys during route A equal channel angular extrusion:experiments and simulations[J].Acta Materialia,2005,53:3135-3146.
[18]
BARNETT M R,NAVE M D,BETTLES C J.Deformation microstructures and textures of some cold rolled Mg alloys[J].Materials Science and Engineering,2004,A 386:205-211.
[19]
STAROSELSKY A,ANAND L.A constitutive model for hcp materials deforming by slip and twinning:application to magnesium alloy AZ31B[J].International Journal of Plasticity,2003,19:1843-1864.
WATANABE H,MUKAI T,KOHZU M.Effect of temperature and grain size on the dominant diffusion process for super-plastic flow in an AZ61 magnesium alloy[J].Acta Mater,1999,47(14):3753-3758.
[24]
WATANABE H,TSUTSUI H,MUKAI T.Deformation mechanism in a coarse-grained Mg-Al-Zn alloy at elevated temperatures[J].International Journal of Plasticity,2001,17:387-397.
[25]
BUSSIBA A,KUPIEC M,IFERGANE S,et al.Fracture and deformation potential of magnesium alloy at low temperatures[A].Proceedings of the International Cryogenic Materials Conference-ICMC[C].New York:American Institute of Physics,2002.
[26]
KLIMANEK P,POTZSCH A.Microstructure evolution under compressive plastic deformation of magnesium at different temperatures and strain rates[J].Materials Science and Engineering,2002,A324:145-150.
[27]
BAASER H,GROSS D.Analysis of void growth in a ductile material in front of a crack tip[J].Computational Materials Science,2003,26:28-35.
[28]
WEILER J P,WOOD J T,KLASEN R J,et al.Relationship between internal porosity and fracture strength of die-cast magnesium AM60 alloy[J].Materials Science and Engineering,2005,A 395:315-322.
[29]
KANAHASHI H,MUKAI T,YAMADA Y,et al.Experimental study for the improvement of crashworthiness in AZ91 magnesium foam controlling its micro-structure[J].Materials Science and Engineering,2001,A 308:283-287.
