全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...
材料工程  2008 

缝合与非缝合加筋蒙皮结构强度试验研究

, PP. 54-58

Keywords: 复合材料,加筋蒙皮,缝合结构,强度试验

Full-Text   Cite this paper   Add to My Lib

Abstract:

缝合技术是增强断裂韧性和加强连接的重要手段。为了验证其相比于传统胶接强度的提高程度,研究设计了复合材料缝合与非缝合T型和L型加筋蒙皮试验件和试验夹具,进行了拉脱破坏强度的对比试验,结果表明缝合后的L型试件平均强度提高了93.4%,而T型试件强度并没有得到提高。从试验现象上分析了出现这种情况的原因。

References

[1]  赵渠森.先进复合材料手册[M] 北京:机械工业出版社,2003.
[2]  MOURITZ A P,JAIN L K.Further validation of the Jain and Mai models for interlaminar fracture of stitched composites[J] Comp Sci Tech,1999,59:1653-1662.
[3]  DRANSFIELD K A,JAIN L K,MAI Y-W.On the effects of stitching in CFRPs-I.Mode I delamination toughness[J] Comp Sci Tech,1998,58:815-827.
[4]  JAIN L K,DRANSFIELD K A,MAI Y-W.On the effects of stitching in CFRPs-II.Mode II delamination toughness[J] Comp Sci Tech,1998,58:829-837.
[5]  LALIT K JAIN.Determination of mode II delamination toughness of stitched laminated composites[J] Composites Science and Technology,1995,55:241-253.
[6]  杨乃宾,章怡宁.复合材料飞机设计手册[M] 北京:航空工业出版社,2002.
[7]  魏玉卿,张俊乾.缝纫复合材料层合板面内拉伸强度研究[J] 力学季刊,2005,26(4):634-638.

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133