全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...
材料工程  2009 

Cu-Cr-Zr系合金变形过程中的织构分析

Keywords: Cu-Cr-Zr,织构,热轧,固溶,冷轧

Full-Text   Cite this paper   Add to My Lib

Abstract:

对Cu-Cr-Zr系合金铸锭进行热轧、固溶和冷轧,利用X射线衍射仪测试合金材料不同状态下的织构,分析各个状态下的织构种类及其演变规律.结果表明热轧后材料中主要织构为Copper{112}〈111〉(C)织构、Brass{011}〈211〉(B)织构和S{123}〈634〉织构,存在微弱的立方织构{001}〈100〉;固溶后材料中织构的强度降低,立方织构消失;冷轧后材料中织构的强度随着变形量的增加而强度增加,冷轧过程中主要织构也是C织构、B织构和S织构,在冷轧初期出现Goss{011}〈100〉(G)织构,随后G织构慢慢减弱,直至消失.

References

[1]  TU J P,QI W X.,YANG Y Z,et al.Effect of aging treatment on the electrical sliding wear behavior of Cu-Cr-Zr alloy[J].Wear,2002,249:1021-1027.
[2]  HUANG Fu-xiang,MA Ju-sheng,NING Hong-long,et al.Analysis of phases in a Cu-Cr-Zr alloy[J].Scripta Materialia,2003,48:97-102.
[3]  BATRA I S,DEY G K,KULKARNI U D,et al.Microstructure and properties of a Cu-Cr-Zr alloy[J].Journal of Nuclear Materials,2001,299:91-100.
[4]  BATRA I S,DEY G K,KULKARNI U D,et al.Precipitation in a Cu-Cr-Zr alloy[J].Materials Science and Engineering A,2002,356:32-36.
[5]  SU Juan-hua,DONG Qi-ming,LIU Ping,et al.Research on aging precipitation in a Cu-Cr-Zr-Mg alloy[J].Materials Science and Engineering A,2005,392:422-426.
[6]  刘勇,刘平,李伟,等.Cu-Cr-Zr-Y合金时效析出行为研究[J].功能材料,2005,36(3):377-379.
[7]  GRTNER F,NORMAN A F,GREER A L,et al.Texture analysis of the development of microstructure in Cu-30at.%Ni alloy droplets solidified at selected undercoolings[J].Acta Materialia,1997,45(1):46-51.
[8]  张德芬,黄涛,胡卓超,等.3140铝合金再结晶织构的研究[J].材料工程,2004,(11):28-31.
[9]  毛卫民,张新明.晶体材料织构定量分析[M].北京:冶金工业出版社,1995.

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133