全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...
材料工程  2008 

镁合金液除气工艺参数的优化

, PP. 64-67

Keywords: 镁合金液,除气,正交设计,回归

Full-Text   Cite this paper   Add to My Lib

Abstract:

利用镁合金快速定量测氢仪研究了通Ar除气对AZ91镁合金熔体除气处理的效果,以及通Ar流量、通Ar时间及精炼温度三因子对精炼效果的影响.运用正交试验方法找到了通Ar除气工艺的最佳工艺参数匹配,即通Ar流量为1~1.5L/min,通Ar时间为20~25min,镁液温度为725~750℃.揭示了主要工艺参数对镁合金熔体净化的影响规律.

References

[1]  YUAN Guang-yin,LIU Man-ping,DING Wen-jiang,et al.Microstructure and mechanical properties of Mg-Zn-Si based alloys[J].Materials Science &Engineering A,2003,357(1-2):314-320.
[2]  DU Wen-wen,SUN Yang-shan,MIN Xue-gang,et al.Microstructure and mechanical properties of Mg Al based alloy with calcium and rare earth additions[J].Materials Science &Engineering A,2003,356(1-2):1-7.
[3]  YUAN Guang-yin,SUN Yang-shan,DING Wen-jiang.Effects of bismuth and antimony additions on the microstructure and mechanical properties of AZ91 magnesium alloy[J].Materials Science &Engineering A,2001,308(1-2):38-44.
[4]  HAN J W,KIM D J,YOU B D,et al.Effect of gas bubbling and impeller agitation on degassing kinetics during magnesium alloy(AZ91D)melt recycling-water model approach[J].Materials Science Forum,2003,439:192-199.
[5]  WATANABE T,HUANG Y C,KOMATSU R,et al.Study on degassing treatment for molten magnesium[J].Light Metals,1976,26(6):266-272.
[6]  BAKKE P,LAURITZEN J L,ENGH T A,et al.Hydrogen in magnesium absorption,removal and measurement[J].Light Metals,1991,1015-1023.
[7]  MIKUCKI B A,SHEAROUSE Ⅲ J D.The effects and removal of hydrogen gas in AZ91 alloy[J].IMA,1993,62-73.
[8]  胡中潮,张二林,曾松岩.铸造镁合金旋转喷吹除气的试验研究[J].特种铸造及有色合金,2006,26(3):139-141.
[9]  XU Si-xiang,WU Shu-sen,MAO You-wu,et al.Establishment of a hydrogen measurement system for magnesium alloy melt[J].Trans Nonferrous Met Soc China,2006,S3:1677-1680.
[10]  杨长贺,曹兴言,王甲运,等.多孔吹头通Ar精炼铝合金液的生产试验研究[J].大连工学院学报,1982,21(4):125-131.
[11]  陆树逊,顾开道,郑来苏.有色铸造合金及其熔炼[M].北京:国防工业出版社,1983.

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133