全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...
材料工程  2008 

累积叠轧工艺对AZ31镁合金板材组织和性能的影响

, PP. 22-27

Keywords: 累积叠轧,镁合金,组织,性能

Full-Text   Cite this paper   Add to My Lib

Abstract:

采用累积叠轧工艺对AZ31镁合金薄板进行剧塑性变形,研究了累积叠轧变形过程中镁合金板材的组织及性能演变.实验结果表明,累积叠轧可以有效细化AZ31镁合金板材的晶粒组织,显著改善室温延伸率,是制备大尺寸、高性能细晶镁合金板材的一种有效、经济而且可以实现工业化生产的技术.累积叠轧5道次后AZ31镁合金板材组织均匀,晶粒尺寸为1~2μm左右,晶粒细化源于大的累积变形及表面剪切变形;室温抗拉强度和延伸率可达到349MPa和22.46%,可归因于晶粒细化对镁合金强度和塑性的改善.累积叠轧板材的道次间的加热使ARB组织粗化,减小了累积叠轧过程中晶粒持续细化的效果.

References

[1]  COLLEEN J BETTLES,MARK A GIBSON.Current wrought magnesium alloys:strengths and weaknesses[J].JOM,2005,57(5):46-49.
[2]  余琨,黎文献,王日初,等.变形镁合金的研究、开发及应用[J].中国有色金属学报,2003,13(2):277-288.
[3]  PE′REZ-PRADO M T,DEL VALLE J A,RUANO O A.Achieving high strength in commercial Mg cast alloys through large strain rolling[J].Materials Letters,2005,59:3299-3303.
[4]  PE REZ-PRADO M T,DEL VALLE J A,RUANO O A.Grain refinement of Mg Al Zn alloys via accumulative roll bonding[J].Scripta Materialia,2004,51:1093-1097.
[5]  VALIEV R Z,ISLAMGALIEV R K,ALEXANDROV I V.Bulk nanostructured materials from severe plastic deformation[J].Progress in Materials Science,2000,45:103-189.
[6]  PE REZ-PRADO M T,DEL VALLE J A,CONTRERAS J M,et al.Microstructural evolution during large strain hot rolling of an AM60 Mg alloy[J].Scr Mater,2004,50:661-665.
[7]  DEL VALLE J A,PE REZ-PRADO M T,RUANO O A.Accumulative roll bonding of a Mg-based AZ61 alloy[J].Materials Science and Engineering A,2005,410-411:353-357.
[8]  KARL IK M,HOMOLAA P,SLAMOVA M.Accumulative roll-bonding:first experience with a twin-roll cast AA8006 alloy[J].Journal of Alloys and Compounds,2004,378:322-325.
[9]  SAITO Y,UTSUNOMIYA H,TSUJI N,et al.Novel ultra-high straining process for bulk materials development of the accumulative roll-bonding(ARB) process[J].Acta Mater,1999,47(2):579-583.
[10]  NOBUHIRO,YOSHIHIRO,LEE S H,et al.ARB (Accumulative Roll-Bonding) and other new techniques to produce bulk ultrafine grained materials[J].Advanced Engineering Materials,2003,5(5):338-344.
[11]  陈振华,严红革,陈吉华,等.镁合金[M].北京:化学工业出版社,2004.
[12]  KIM H W,KANG S B,NOBUHIRO TSUJI.Elongation increase in ultra-fine grained Al-Fe-Si alloy sheets[J].Acta Materialia,2005,53:1737-1749.
[13]  LEE S H,SAITO Y,TSUJI N,et al.Role of shear strain in ultragrain refinement by accumulative roll-bonding (ARB) process[J].Scripta Materialia,2002,46:281-285.
[14]  HANSEN N,HUANG X,UEJI R,et al.Structure and strength after large strain deformation[J].Materials Science and Engineering A,2004,387-389:191-194.
[15]  HUANG X,TSUJI N,HANSEN N.Microstructural evolution during accumulative roll-bonding of commercial purity aluminum[J].Materials Science and Engineering A,2003,340:265-271.
[16]  SAITO Y,TSUJI N,UTSUNOMIYA H,et al.Ultra-fine drained bulk aluminium produced by accumulative roll-bonding (ARB) process[J].Scripta Materialia,1998,39(9):1221-1227.
[17]  AVEDESIAN M M,BAKER H.ASM specialty handbook-magnesium and magnesium alloy[M].Materials Park,OH,ASM international,1999.

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133