全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...
材料工程  2008 

Cr-Si合金钢表面纳米晶热稳定性的研究

Keywords: Cr-Si合金钢,表面纳米化,纳米晶,热稳定性

Full-Text   Cite this paper   Add to My Lib

Abstract:

采用超音速微粒轰击技术在Cr-Si合金钢的表面制备了纳米结构层。最表面层的晶粒尺寸约为16nm。利用X射线衍射(XRD)技术和透射电镜(TEM)分析技术对退火后表面纳米晶的结构变化进行分析。结果显示当温度低于450℃进行退火时,表面纳米晶的尺寸变化不大。当退火温度达到450℃时,表面纳米晶失去稳定急剧长大到100nm左右。分析表明在低于450℃时,Cr-Si合金钢表面纳米晶具有良好的热稳定性,表面纳米晶的本征结构、退火时结构的动态回复以及渗碳体颗粒对晶界运动的阻碍是决定其具有一定的热稳定性的主要因素。

References

[1]  LU K,LU JIAN.Surface nanorystallization(SNC) of metallic materials-presentation of the concept behind a new approachI-J].J Mater Sci Technol,1999,15(3):193-197.
[2]  LU K,LU J.Nanostructured surface layer on metallic materials induced by surface mechanical attrition treatment[J].Materials Science and Engineering A,2004,375-377:38-45.
[3]  LIAN J,VALIEV R Z,BAUDELET B.On the enhanced grain growth in uhrafine grained metals[J].Aeta Metall Mater,1995,43:4165-4170.
[4]  OKUDA S,KOBIYAMA M,INAMI T,et al.Thermal stability of nanocrystalline gold and copper prepared by gas deposition method[J].Scripta Mater,2001,44:2009-2012.
[5]  LU K,DONG Z F,BAKONYI I,et al.Thermal stability and grain growth of a melt-spun HfNi5 nanophase alloy[J].Acta Metall Mater,1995,43:2641-2647.
[6]  卢柯,周飞.纳米晶材料的研究现状[J].金属学报,1997,33(1):99-106.
[7]  熊天英,刘志文,李智超.超音速微粒轰击金属表面纳米化新技术[J].材料导报,2003,17(3):69-71.
[8]  巴德玛,马世宁,李长青,等.超音速微粒轰击38CrSi钢表面纳米化的研究[J].材料工程,2006,(12):3-7.
[9]  HONO K,OHUMA M,MURAYAMA M,et al.Cementite decomposition in heavity drawn pearlite steel wire[J].Scripta Mater,2001,44:977-983.
[10]  LIU Z G,HAO X J,MASUYAMA K,et al.Nanocrystal for-mation in a ball milled eutectoid steel[J].Scripta Mater,2001,44:1775--1779.
[11]  LANGUILLAUME J,KAPELSKI G,BAUDELET B.Cementite dissolution in heavily cold drawn pearlitic steel wires[J].Acta Mater,1997,45(3):1201-1212.
[12]  HIBBARD G D,MCCREA J L,ERB U.An initial analysis of mechanisms leading to late stage abnormal grain growth in nanocrystalline Ni[J].Scripta Materialia,2002,47(2):83-87.
[13]  VALIEV R Z,KORZNIKOV A V,MULYUKOV R R.Structure and properties of uhrafine-grained materials produced by severe plastic deformation[J].Scripta MetaU Mater,1993,168(2):141-151.
[14]  张立德,牟季美.纳米材料和纳米结构[M1.北京:科学出版社,2001.242-249.
[15]  REINER KIRCHHEIM.Grain coarsening inhibited by solutesegregation[J].Acts Materialia,2002,50(2):413-419.
[16]  XIAO Cheng-he,MIRSHAMS R A,WHANG S H,et al.Tensile behavior and fracture in nickel and carbon doped nanocrystal-line nickel[J].Materials Science and Engineering A,2001,301(1):35-43.
[17]  KNAUTH P,CHARA A,GAS P.Grain growth of pure nickel and of a Ni-Si solid solution studied by differential scanning calo-rimetry on nanometer-sized crystals[J].Scripta Metallurgica et Materialia,1993,(28):325-330.
[18]  LIU K W,M CKLICH F.Thermal stability of nano-RuA1 produced by mechanical alloying[J].Acta Materialia,2001,49(3):395-403.
[19]  MALOW T R,KOCH C C.Grain growth in nanocrystalline iron prepared by mechanical attrition[J].Acta Materialia,1997,45(5):2177-2186.

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133