全部 标题 作者
关键词 摘要

OALib Journal期刊
ISSN: 2333-9721
费用:99美元

查看量下载量

相关文章

更多...
材料工程  2009 

C-Si-Mn冷轧双相钢的应变硬化特性

Keywords: 双相钢,应变硬化,弹塑性行为,马氏体

Full-Text   Cite this paper   Add to My Lib

Abstract:

试制了C-Si-Mn冷轧双相钢。采用力学测试、显微组织观察与修正的C-J分析方法研究了双相钢的应变硬化特性。研究结果表明,双相钢的应变硬化具有两阶段。第一阶段应变硬化能力较强,第二阶段硬化能力减弱。两阶段硬化之间存在一个转折应变。当马氏体体积分数小于16%,随马氏体体积分数的增加,两阶段硬化能力均增强。当马氏体体积分数大于16%,随马氏体体积分数的增加,两阶段硬化能力均减弱。硬化转折应变则随马氏体体积分数增加单调递减。铁素体与马氏体的弹塑性行为差异是导致双相钢两阶段硬化的主要原因。马氏体体积分数增加,其强化效果增加,但是由于马氏体中的碳含量降低,其塑性抗力降低。只有当马氏体量增加带来的强化效应大于碳含量减少的弱化效应时,双相钢的应变硬化能力才随之增加。

References

[1]  RAMOS L F,MATALOCK D K,KRAUSS G.On the deformation behavior of dual-phase steels[J].Metallurgical Transactions,1979,10A:259-261.
[2]  TOMITA Y,OKABAYASHI K.Tensile stress-strain analysis of cold worked metals and steels and dual-phase steels[J].Metallurgical Transactions A,1971,16:865-872.
[3]  SWIFT H W.Plastic instability under plane stress[J].Journal of the Mechanics and Physics of Solids,1952,(1):1-18.
[4]  邝霜,康永林,于浩,等.DP500冷轧双相钢的组织与性能[J].金属热处理,2007,32 (5):51-55.
[5]  BHATTACHARYA D.Developments in advanced high strength steels[A].The Joint International Conference of HSLA Steels 2005 and ISUGS 2005 proceedings[C].Beijing:The Metallurgical Industry Press,2005.69-75.
[6]  马鸣图,吴宝榕.双相钢-物理和力学冶金[M].北京:冶金工业出版社,1988.
[7]  MONTEIRO S N,REED-HILL R E.On the doublE-n behavior of iron[J].Metallurgical Transactions,1971,2 (10):2947-2948.
[8]  THOMAS H,SHIGERU E,NOBUYUKI I.et al.Effect of volume fraction of constituent phases on the stress-strain relationship of dual phase steels[J].ISIJ International,1999,39 (3):288-294.

Full-Text

Contact Us

service@oalib.com

QQ:3279437679

WhatsApp +8615387084133