LE Q C, ZHANG Z Q, SHAO Z W, et al. Microstructures and mechanical properties of Mg-2%Zn-0.4%RE alloys[J]. Trans Nonferrous Met Soc China, 2010, 20(2): 352-356.
[2]
ZOU H H, ZENG X Q, ZHAI C Q, et al. Effects of Nd on the microstructure of ZA52 alloy[J]. Materials Science and Engineering A, 2005, 392(1-2): 229-234.
[3]
FU P H, PENG L M, JIANG H Y, et al. Effects of heat treatments on the microstructures and mechanical properties of Mg-3Nd-0.2Zn-0.4%Zr(wt.%) alloy[J]. Materials Science and Engineering A, 2008, 486(1-2): 183-192.
[4]
DING W J, LI D Q, WANG Q D, et al. Microstructure and mechanical properties of hot-rolled Mg-Zn-Nd-Zr alloys[J]. Materials Science and Engineering A, 2008, 483-484(15): 228-230.
[5]
ZHANG D F, SHI G L, ZHAO X B, et al. Microstructure evolution and mechanical properties of Mg-x%Zn-1%Mn(x=4, 5, 6, 7, 8, 9)[J]. Trans Nonferrous Met Soc China, 2011, 21(1): 15-25.
[6]
YANG J, WANG J L, WANG L D, et al. Microstructure and mechanical properties of Mg-4.5Zn-xNd (x=0, 1 and 2, wt.%) alloys[J]. Materials Science and Engineering A, 2008, 479(1-2): 339-344.
[7]
LI Q, WANG Q D, WANG Y X, et al. Effect of Nd and Y addition on microstructure and mechanical properties of as-cast Mg-Zn-Zr alloy[J]. J Alloy Compd, 2007, 427(1-2): 115-123.
[8]
GAO X, NIE J F. Structure and thermal stability of primary intermetallic particles in an Mg-Zn casting alloy[J]. Scripta Materialia, 2007, 57(7): 655-658.
[9]
WAGNER F, BOZZOLO N, VAN LANDUYT O, et al. Evolution of recrystallisation texture and microstructure in low alloyed titanium sheets[J]. Acta Materialia, 2002, 50(5): 1245-1259.
[10]
BOZZOLO N, DEWPBROTO N, GROSDIDIER T, et al. Texture evolution during grain growth in recrystallized commercially pure titanium[J]. Materials Science and Engineering A, 2005, 397(1-2): 346-355.
[11]
张丁非, 丁培道, 潘复生, 等. 重庆镁合金研究与产业的发展现状与建议[J]. 材料导报, 2004, 18(8A): 16-19.ZHANG D F, DING P D, PAN F S, et al. Status and suggestion of magnesium alloy research and industrialization in Chongqing[J]. Materials Review, 2004, 18(8A): 16-19.
[12]
丁文江, 彭立明, 付鹏怀, 等. 高性能镁合金及其成形加工技术与应用研究进展[J]. 新材料产业, 2008,(2): 58-63.DING W J, PENG L M, FU P H, et al. High performance magnesium alloy forming technology and application research progress [J]. Advanced Materials Industry, 2008,(2): 58-63.
[13]
丁文江, 吴玉娟, 彭立明, 等. 高性能镁合金研究及应用的新进展[J]. 中国材料进展, 2010, 29(8): 37-45.DING W J, WU Y J, PENG L M, et al. Research and application development of advanced magnesium alloys[J]. Materials China, 2010, 29(8): 37-45.
[14]
余琨, 黎文献, 李松瑞. 变形镁合金材料的研究进展[J]. 轻金属加工技术, 2001, 29(7): 6-11.YU K, LI W X, LI S R. The research and developments of wrought magnesium alloy[J]. Light Alloy Fabrication Technology, 2001, 29(7): 6-11.
[15]
彭建, 吕滨江, 潘复生, 等. 高塑性Mg-Zn系稀土镁合金的研究进展[J]. 热加工工艺, 2010, 39(18): 15-19.PENG J, LV B J, PAN F S, et al. Research progress of rare-earth mg-zn alloy with high plasticity[J]. Working Technology, 2010, 39(18): 15-19.
[16]
戴庆伟, 张丁非, 袁炜, 等. 新型Mg-Zn-Mn变形镁合金的挤压特性与组织性能研究[J]. 材料工程, 2008,(4): 38-42.DAI Q W, ZHANG D F, YUAN W, et al. Researches on extrusion,microstructure and mechanical properties of new Mg-Zn-Mn Alloy[J]. Journal of Materials Engineering, 2008,(4): 38-42.
