LIU W H, LIU Y G, XIONG S M. Influences of casting pressure conditions on the quality and properties of a magnesium cylinder head cover die casting[J].J Mater Sci Tech, 2005,21(2):170-174.
[2]
张金旺,侯利锋,许并社.热处理对压铸镁合金化学镀层组织和性能的影响[J]. 材料热处理学报,2010,31(2):137-140.ZHANG J W, HOU L F, XU B S. Effect of heat treatment on microstructure and properties of electroless Ni2P deposits on AZ91D magnesium alloy[J]. Transactions of Materials and Heat Treatment,2010,31(2):137-140.
[3]
吴国华,孙明,王玮, 等. 镁合金纯净化研究新进展[J]. 中国有色金属学报,2010,20(6):1021-1030.WU G H, SUN M, WANG W, et al. New research development on purification technology of magnesium alloys[J]. The Chinese Journal of Nonferrous Metals, 2010,20(6):1021-1030.
[4]
ASL K M, TARI A, KHOMAMIZADEH F. The effect of different content of Al, RE and Si element on the microstructure, mechanical and creep properties of Mg-Al alloys[J]. Mater Sci Eng A, 2009,523(1-2): 1-6.
[5]
ZENG Y W, PENG L M, MAO X M, et al. A new low GWP protective atmosphere containing HFC-152a for molten magnesium against ignition[J]. Materials Science Forms,2005,488-489:73-76.
[6]
熊守美.镁合金压铸成形技术研究进展[J].航空制造技术,2006,(2):32-35. XIONG S M. Research development on die casting of magnesium alloys[J]. Aeronautical Manufacturing Technology, 2006,(2):32-35.
[7]
王明星,周宏,王林,等. 钇和铈对AM50镁合金显微组织和力学性能的影响[J]. 中国稀土学报,2007,25(1):69-73. WANG M X, ZHOU H, WANG L, et al. Effect of yttrium and cerium addition on microstructure and mechanical properties of AM50 magnesium alloy[J]. Journal of the Chinese Rare Earth Society, 2007,25(1):69-73.
[8]
ZHANG J H,WANG J, XIN Qiu, et al. Effect of Nd on the microstructure, mechanical properties and corrosion behavior of die-cast Mg-4Al-based alloy[J]. J Alloy Comp, 2008, 464:556-564.
[9]
黄玉光, 吴国华, 王玮, 等. 熔剂净化对Mg-Gd-Y-Zr 合金流动性的影响[J]. 铸造, 2009, 58(2):104-107.HUANG Y G, WU G H, WANG W, et al. Effect of flux purification on fluidity of Mg-Gd-Y-Zr magnesium alloy[J].Foundry, 2009, 58(2): 104-107.
[10]
MEHTA D S,MASOOD,SONG W Q.Investigation of wear properties of magnesium and aluminum alloys for automotive applications[J].J Mater Process Tech,2004,155-156:1526-1531.
[11]
LI N Y.Magnesium advances and applications in North America automotive industry[J]. Materials Science Forum, 2005,488-489:931-935.
[12]
HUA Q, GAO D M, ZHANG H J,et al.Influence of alloy elements and pouring temperature on the fluidity of cast magnesium alloy[J]. Mater Sci Eng A, 2007,444(10-2):69-74.
[13]
JIA J X, SONG G, ATRENS A. Boundary element predictions of the influence of the electrolyte on the galvanic corrosion of AZ91D coupled to steel[J]. Mater Corros, 2005, 56:259-270.
[14]
CHANG J W, GUO X W, FU P H, et al. Effect of heat treatment on corrosion and electrochemical behavior of Mg3Nd0.2Zn 0.4Zr(wt.%) alloy[J].Electrochimca Acta, 2007, 52: 3160 -3167.
[15]
YANG L J, WEI Y H, HOU L F, et al.Corrosion behaviour of die-cast AZ91D magnesium alloy in aqueous sulphate solutions[J]. Corros Sci, 2010, 52(2):345-351.
[16]
HIDETOSHI FUJII, SHUN IZUTANI, TAIHEI MATSUMOTO. Evaluation of unusual change in contact angle between MgO and molten magnesium[J]. Mater Sci Eng, 2006, 417(1-2):99-103.
[17]
YOU G Q,LONG S Y, ZHA J L. A novel technique for on-line generation of Mg-shielding gas[J]. Materials Science Forum, 2005, 488-489:77-80.
[18]
WANG L, SHINOHARA T, ZHANG B P. Influence of chloride, sulfate and bicarbonate anions on the corrosion behavior of AZ31 magnesium alloy[J]. Journal of Alloys and Compounds, 2010, 496(1-2): 500-507.
[19]
丁文江. 镁合金科学与技术[M]. 北京: 科学出版社, 2007.
[20]
刘正.镁合金铸造成型最新研究进展[J]. 中国材料进展,2011, 30(2):10-15. LIU Z, Progress on research of magnesium casting technique[J]. Materials China,2011, 30(2):10-15.
[21]
于彭,张景怀,唐定骧,等. 高压压铸 Mg-4Al-0.4Mn-xPr 镁合金的显微组织和力学性能[J]. 中国有色金属学报, 2009,19(5):833-840. YU P, ZHANG J H, TANG D X, et al. Microstructures and mechanical properties of high-pressure die-cast Mg-4Al-0.4Mn-xPr alloys[J]. The Chinese Journal of Nonferrous Metals, 2009,19(5):833-840.
[22]
严力,王猛,单志法 等.镁合金调压铸造充型能力的研究[J].铸造技术,2005,26(10):914-915. YAN L, WANG M, SHAN Z F, et al. Research on filling capacity of adjusted pressure casting of magnesium alloys[J]. Foundry Technology,2005,26(10):914-915.
[23]
王栓强.镁合金压铸技术进展[J].铸造技术,2008,29(9):1292-1294. WANG S Q.Progress in die-casting technology of magnesium alloy[J]. Foundry Technology, 2008,29(9):1292-1294.
[24]
王峰.压铸镁合金组织与力学性能及复杂铸件成形研究.沈阳:沈阳工业大学,2010.
[25]
刘志勇,许庆彦,柳百成. AZ91D压铸镁合金的三维微观组织模拟[J].金属学报,2006, 26 (12): 1291-1297. LIU Z Y,XU Q Y,LIU B C.3D microstructure simulation of AZ91D die casting magnesium alloy[J].Acta Metallurgica Sinica,2006, 26 (12): 1291-1297.
[26]
吴孟武,熊守美.基于改进CA方法的压铸镁合金微观组织模拟[J].金属学报, 2010, 46(12):1534-1542. WU M W,XIONG S M. Microstructure simulation of high pressure die cast magnesium alloy based on modified CA method[J]. Acta Metallurgica Sinica, 2010, 46(12):1534-1542.
[27]
周乐,刘正,陈立佳.AM 60 镁合金空调机支架充型过程的数值模拟[J]. 铸造,2007,56(6):626-629. ZHOU L,LIU Z,CHEN L J. Simulation of mold filling for an AM60 die-casting air-conditioning bracket[J]. Foundry,2007,56(6):626-629.
[28]
吴伟.Mg-AI-Nd压铸镁合金的组织性能及压铸成形过程的数值模拟.沈阳:沈阳工业大学,2010.
[29]
YANG Z,LI J P.Review on research and development of Magnesium Alloy[J].Acta Metall, 2008,21: 313-328.
[30]
张德平,田政,唐定骧,等.铈镧混合稀土对AZ91D压铸镁合金显微组织和蠕变性能的影响[J].稀有金属,2010,34(2):202-209. ZHANG D P, TIAN Z, TANG D X, et al. Effect of Ce/La on microstructure and creep property of die-cast AZ91D alloy[J]. Chinese Journal of Raremetals,2010, 34(2):202-209.
[31]
TONG G D, LIU H F, LIU Y H. Effect of rare earth additions on microstructure and mechanical properties of AZ91 magnesium alloys[J]. Transactions of Nonferrous Metals Society of China,2010,20:336-340.
[32]
杨家灼,许春香,张学勇.Ca对ZA104镁合金显微组织和力学性能的影响[J]. 稀有金属材料与工程,2011,40(7):1168-1172. YANG J Z, XU C X, ZHANG X Y. Effects of Ca on microstructure and mechanical properties of ZA104 magnesium alloy[J]. Rare Metal Materials and Engineering, 2011,40(7):1168-1172.
[33]
万晓峰,孙扬善,薛烽,等.含Ca和Sr的Mg-12Sn-4Al-0.3Mn合金的显微组织和力学性能[J]. 金属学报,2009,59(5):585-591. WAN X F,SUN Y S,XUE F, et al. Microstructure and mechanical properties of Mg-12Sn-4Al-0.3Mn alloy containing Sr and Ca[J]. Acta Metallurgica Sinica, 2009,59(5):585-591.
[34]
WU G H, XIE M, ZHAI C Q. Purification technology of AZ91 magnesium alloy wastes[J]. Trans Nonferrous Met Soc China,2003, 13(6): 1260-1264.
[35]
MAYER H,PAKYRIACOU M,ZETTL B,et al.Influence of porosity on the fatigue limit of die-easting magnesium and aluminum alloys[J].International Journal of Fatigue,2003,25:245-256.
[36]
徐永东,周灵展,赵国田,等. 耐蚀铸造镁合金的研究现状[J]. 兵器材料科学与工程,2009,32(6):84-88. XU Y D,ZHOU L Z,ZHAO G T, et al. Research status of corrosion-resistant casting magnesium alloys[J]. Ordnance Material Science and Engineering, 2009,32(6):84-88.
[37]
BEN-HAMU G,ELIEZER D,SHIN K S,et al. The relation between microstructure and corrosion behavior of Mg-RE-Y-Zr alloys[J].J Alloy Comp,2007,431:269-276.
[38]
SONG Y L,LIU Y H,YU S R. Effect of neodymium on microstructure and corrosion resistance of AZ91 magnesium alloy[J]. J Mater Sci,2007,42:4435-4440.
[39]
吴国华,樊昱,翟春泉,等. 稀土La对AZ91D镁合金在NaCl溶液中耐蚀性的影响[J].金属学报,2008,44(10):1247-1252. WU G H,FAN Y,ZHAI C Q, et.al.Effect of La on the corrosion resistance of AZ91D magnesium alloy in NaCl aqueous solution[J]. Acta Metallurgica Sinica, 2008,44(10):1247-1252.
[40]
刘楚明,葛位维,李慧中,等.Er对铸态AZ91镁合金显微组织和耐腐蚀性能的影响[J].中国有色金属学报,2009,19(5):847-853. LIU C M, GE W W, LI H Z, et al. Effect of Er on microstructure and corrosion resistance of AZ91 magnesium alloy[J]. The Chinese Journal of Nonferrous Metals, 2009,19(5):847-853.
[41]
李华基, 刘志良.加入混合稀土后ZM5镁合金的耐腐蚀性能[J].机械工程材料,2011,35(4): 76-99. LI H J, LIU Z L. Corrosion resistance of ZM5 magnesium alloy after mischmetal addition[J]. Materials for Mechanical Engineering,2011,35(4): 76-99.
[42]
刘贵立. 镁合金电子结构与腐蚀特性研究[J]. 物理学报,2010,59(4):2708-2713. LIU G L.Electronic structure and corrosion character of Mg alloys[J]. Acta Physica Sinica,2010,59(4):2708-2713.
[43]
游国强. 新型镁熔体气体保护技术基础研究.重庆:重庆大学,2007.
[44]
KOJIA Y, AIZAWA T, HIGASHI K, et al. Issues that influence magnesium's use in the automotive industry[J].Materials Science Forum, 2003, 419-422: 43-50.
[45]
黄玉光, 吴国华, 王玮,等. 熔剂净化对Mg-Gd-Y-Zr 合金流动性的影响[J]. 铸造, 2009, 58(2):104-107. HUANG Y G, WU G H, WANG W,et al. Effect of flux purification on fluidity of Mg-Gd-Y-Zr magnesium alloy[J].Foundry, 2009, 58(2): 104-107.
[46]
WANG W, HUANG Y G, WU G H, et al. Influence of flux containing YCl3 additions on purifying effectiveness and properties of Mg-10Gd-3Y-0.5Zr alloy[J].Journal of Alloys and Compounds, 2009, 480(2): 386-391.
[47]
DING W J, WU G H, BONG S Y, et al. Effects of CeCl3-containing flux on the microstructure and mechanical properties of magnesium alloy containing rare earth[J]. Materials Science Forum, 2007, 546-549: 563-566.
[48]
WANG W, WU G H, WANG Q D, et al. Investigation of flux containing GdCl3 on recycling Mg-Gd-Y-Zr scraps[J]. Trans Nonferrous Met Soc China, 2008,18(S1): 292-298.
[49]
王玮. Mg-10Gd-3Y-0.5Zr合金复合净化行为研究. 上海:上海交通大学,2010.
[50]
WANG J, YANG Y S, TONG W H.Effect of purification treatment on corrosion resistance of Mg-Gd-Y-Zr alloy[J]. Transactions of Nonferrous Metals Society of China,2011,21:949-954.
[51]
王先飞,熊守美. 熔态AZ91D合金在含SO2的保护气氛中的保护膜特征[J].金属学报,2010,46(12):1529-1533. WANG X F,XIONG S M.Characterization of the surface film formed on molten AZ91D magnesium alloy protected by SO2 mixtures[J]. Acta Metallurgica Sinica, 2010,46(12):1529-1533.
