吴凯, 刘国权, 胡本芙,等. 新型涡轮盘用高性能粉末高温合金的研究进展[J]. 中国材料进展, 2010, 29(3): 23-31.WU Kai, LIU Guo-quan, HU Ben-fu, et al. Research progress of new type high-performance P/M turbine disk superalloy[J]. Materials China, 2010, 29(3): 23-31.
[2]
PRAKASH T L, CHARI Y N, BHAGIRADHA E S, et al. Microstructures and mechanical properties of hot isostatically pressed powder metallurgy alloy APK-1[J]. Metallurgy Transctions, 1983, 4(14A): 733-742.
[3]
谢兴华, 姚泽坤, 宁永权,等. FGH4096合金的动态再结晶与晶粒细化研究[J]. 航空材料学报, 2011, 31(1): 20-24. XIE Xing-hua, YAO Ze-kun, NING Yong-quan, et al. Dynamic recrystallization and grain refining of superalloy FGH4096[J]. Journal of Aeronautical Materials, 2011, 31(1): 20-24.
[4]
胡本芙, 刘国权, 贾成厂,等. 新型高性能粉末高温合金的研究与发展[J]. 材料工程, 2007, (2): 49-57.HU Ben-fu, LIU Guo-quan, JIA Cheng-chang, et al. Development in new type high-performance P/M superalloy[J]. Journal of Materials Engineering, 2007, (2): 49-57.
[5]
迟悦, 张国星, 张义文,等. Zr含量对FGH4096合金组织和性能的影响[J]. 钢铁研究学报, 2011, 23(增刊2): 478-481.CHI Yue, Zhang Guo-xing, Zhang Yi-wen, et al. The influence of Zr on microstructure and properties of FGH4096[J]. Journal of Iron and Steel Research, 2011, 23(S2): 478-481.
[6]
顾玉丽, 何玉怀, 陶春虎,等. FGH96镍基高温合金的高温低周疲劳断裂机理研究[J].材料工程, 2009, (9): 56-60.GU Yu-li, HE Yu-huai, TAO Chun-hu, et al. Low cycle fatigue fracture mechanism at elevated temperature for FGH96 nickle-base superalloy[J]. Journal of Materials Engineering, 2009, (9): 56-60.
[7]
RAO G A, SRINIVAS M, SARMA D S. Effect of oxygen content of powder on microstructure and mechanical properties of hot isostatically pressed superalloy Inconel 718[J]. Materials Science and Engineering A, 2006, 436(1): 84-99.
[8]
SHARMA K K, BALASUBRAMANIAN T V, MISRA R D K. Effect of boron on particle surfaces and prior particle boundaries in a P/M nickel based superalloy[J]. Scripta Metallurgica, 1989, 23(4): 573-577.
[9]
RAO G A, KUMAR M, SRINIVAS, et al. Effect of standard heat treatment on the microstructure and mechanical properties of hot isostatically pressed superalloy incoel 718[J]. Materials Science and Engineering A, 2003, 355(1): 114-125.
[10]
赵军普, 陶宇, 袁守谦,等. 粉末冶金高温合金中的原始粉末颗粒边界(PPB)问题[J]. 粉末冶金工业, 2010, 20(4): 43-49. ZHAO Jun-pu, TAO Yu, YUAN Shou-qian, et al. The problem of prior particle boundary precipitation in P/M superalloys[J]. Powder Metallurgy Industry, 2010, 20(4): 43-49.
[11]
YANG W H, MAO J, WANG W X, et al. Effects of heat treatment on prior particle boundary precipitation in a powder metallurgy nickel base superalloy[J]. Advanced Performance Materials, 1995, 2(1): 269-279.
[12]
赵军普, 袁守谦, 陶宇,等. 高温扩散退火处理对 FGH96 粉末高温合金PPB的影响[J]. 材料导报, 2010, 24(9): 65-68. ZHAO Jun-pu, YUAN Shou-qian, TAO Yu, et al. Effect of sub-solidus diffusion annealing on prior particle boundary precipitation of P/M superalloy FGH96[J]. Materials Review, 2010, 24(9): 65-68.
[13]
曹腊梅, 李相辉, 陈晶阳,等. 固溶温度对第三代镍基单晶高温合金DD10组织的影响[J]. 材料工程, 2011, (10): 23-27. CAO La-mei, LI Xiang-hui, CHEN Jing-yang, et al. Influence of solution heat treatment temperature on the microstructure of the third generation Ni-based single crystal superalloy DD10[J]. Journal of Materials Engineering, 2011, (10): 23-27.
[14]
张义文, 张凤戈, 张莹,等. 一种消除粉末高温合金中PPB的方法[J]. 钢铁研究学报, 2003, 15(7): 513-518. ZHANG Yi-wen, ZHANG Feng-ge, ZHANG Ying, et al. Method of elimination PPB in P/M superalloy[J]. Journal of Iron and Steel Research, 2003, 15(7): 513-518.
田高峰,贾成厂,刘建涛,等.固溶冷却介质对FGH96合金γ'相和性能的影响[J].材料工程,2006,(12):24-27. TIAN Gao-feng, JIA Cheng-chang, LIU Jian-tao, et al. Effect of cooling medium on γ' precipitates and properties in FGH96 alloy[J]. Journal of Materials Engineering, 2006, (12): 24-27.
[17]
SUN W R, LEE J H, SEO S M, et al. The eutectic characteristic of MC-type carbide precipitation in a DS nickel-base superalloy[J]. Materials Science and Engineering A, 1999, 271(1): 143-149.
[18]
胡本芙, 陈焕铭, 宋锋,等. 预热处理对FGH95高温合金粉末中碳化物的影响[J]. 金属学报, 2003, 39(5): 470-475. HU Ben-fu, CHEN Huan-ming, SONG Feng, et al. The effect of pre-heating on carbide precipitates in FGH95 superalloy powders prepared by PREP[J]. Acta Metallrugica Sinica, 2003, 39(5): 470-475.
[19]
马文斌, 吴凯, 刘国权,等. PREP FGH4096粉末凝固组织和碳化物研究[J]. 钢铁研究学报, 2011, 23(增刊2): 490-493. MA Wen-bin, WU Kai, LIU Guo-quan, et al. Effect of cooling rate on microstructure of PREP FGH4096 powders[J]. Journal of Iron and Steel Research, 2011, 23(S2): 490-493.
[20]
胡本芙, 陈焕铭, 李慧英, 等. 等离子旋转电极雾化FGH95高温合金原始粉末颗粒中碳化物研究[J]. 材料工程, 2003, (1): 6-9. HU Ben-fu, CHEN Huan-ming, LI Hui-ying, et al. Research on the carbides in FGH95 superalloy powders prepared by prep during solidification[J]. Journal of Materials Engineering, 2003, (1): 6-9.
[21]
DAHLEN M, WINBERRG L. The influence of γ'-precipitation on the recrystallization of a nickle base superalloy[J]. Acta Metallurgica, 1980, 28(1): 41-50.
