MORISADA Y, FUJII H, NAGAOKA T, et al. MWCNTs/AZ31 surface composites fabricated by friction stir processing[J]. Materials Science and Engineering: A, 2006, 419(1-2): 344-348.
[2]
LIM D K, SHIBAYANAGI T, GERLICH A P. Synthesis of multi-walled CNT reinforced aluminum alloy composite via friction stir processing[J]. Materials Science and Engineering: A, 2009, 507(1-2): 194-199.
[3]
赵霞, 柯黎明, 徐卫平, 等. 搅拌摩擦加工法制备碳纳米管增强铝基复合材料[J]. 复合材料学报, 2011, 28(2): 185-190.[KG*2]ZHAO X, KE L M, XU W P, et al. Carbon nanotubes reinforced aluminum matrix composites by friction stir processing[J]. Acta Materiae Compositea Sinica, 2011, 28(2): 185-190.
[4]
ELANGOVAN K, BALASUBRAMANIAN V. Influences of tool pin profile and tool shoulder diameter on the formation of friction stir processing zone in AA6061 aluminium alloy[J]. Materials & Design, 2008, 29(2): 362-373.
[5]
SCIALPIA A, De FILIPPIS L A C, CAVALIEREB P. Influence of shoulder geometry on microstructure and mechanical properties of friction stir welded 6082 aluminium alloy[J]. Materials & Design, 2007, 28(4): 1124-1129.
[6]
LI W, KE L M, YANG C G, et al. A novel method for measurement of electronic work function of micro/nanostructure materials using a Kelvin probe system[J]. Philosophical Magazine Letters, 2009, 89(9): 557-564.
[7]
GAO R P, PAN Z W, WANG Z L. Work function at the tips of multiwalled carbon nanotubes[J]. Applied Physics Letters, 2001, 78(12): 1757-1759.
[8]
柯黎明. 搅拌摩擦焊接头成形规律研究. 北京:清华大学，2007.
[9]
柯黎明，潘际銮，邢丽，等. 搅拌摩擦焊焊缝金属塑性流动的抽吸-挤压理论[J]. 机械工程学报，2009，45（4）:89-94. KE L M，PAN J L，XING L，et al. Sucking-extruding theory for the material flow in friction stir welds[J]. Journal of Mechanical Engineering，2009，45（4）:89-94.
[10]
张娟玲, 崔屾. 碳纳米管/聚合物复合材料[J]. 化学进展, 2006, 18 (10): 321-326.[KG*2]ZHANG J L, CUI S. Carbon nanotubes/polymer composites [J]. Progress in Chemistry, 2006, 18(10): 321-326.
[11]
ABBASIPOUR B, NIROUMAND B, MONIR VAGHEFI S M. Compocasting of A356-CNT composite[J]. Transactions of Nonferrous Metals Society of China, 2010, 20(9): 1561-1566.
[12]
LIU Z Y, XIAO B L, WANG W G, et al. Singly dispersed carbon nanotube/aluminum composites fabricated by powder metallurgy combined with friction stir processing[J]. Carbon, 2012, 50(5): 1843-1852.
[13]
AZIZIEH M, KOKABI A H, ABACHI P. Effect of rotational speed and probe profile on microstructure and hardness of AZ31/Al2O3 nanocomposites fabricated by friction stir processing[J]. Materials & Design, 2011, 32(4): 2034-2041.
