CHEN X, LAM Y C, LI D Q. Analysis of thermal residual stress in plastic injection molding[J]. Journal of Materials Processing Technology, 2000, 101(1-3): 275-280.
[2]
MIN I, YOON K. An experimental study on the effects of injection-molding types for the birefringence distribution in polycarbonate discs[J]. Korea-Australia Rheology Journal, 2011, 23(3): 155-162.
[3]
ISAYEV A I. Orientation development in the injection molding of amorphous polymers[J]. Polymer Engineering & Science, 1983, 23(5): 271-284.
[4]
王鑫, PENG Y Y, 李海梅, 等. 退火对注射成型PC制品力学性能的影响[J]. 化工学报, 2010, 61(6): 1555-1559.WANG X, PENG Y Y, LI H M, et al. Effects of annealing on mechanical properties of injection mold polycarbonate parts[J].CIESC Journal, 2010, 61(6): 1555-1559.
[5]
SHYU G D, ISAYEV A I, LI C T. Residual thermal birefringence in freely quenched plates of amorphous polymers: simulation and experiment[J]. Journal of Polymer Science Part B: Polymer Physics, 2003, 41(15): 1850-1867.
[6]
ISAYEV A I, SHYU G D, LI C T. Residual stresses and birefringence in injection molding of amorphous polymers: simulation and comparison with experiment[J]. Journal of Polymer Science Part B: Polymer Physics, 2006, 44(3): 622-639.
[7]
陈宇宏, 袁渊, 李曦, 等. 注射成型与注射压缩成型角窗的残余应力比较[J]. 航空材料学报, 2010, 30(3): 48-54.CHEN Y H, YUAN Y, LI X, et al. Residual stresses of injection molded and injection compression molded auto glazing[J]. Journal of Aeronautical Materials, 2010, 30(3): 48-54.
[8]
ANGSTADT D C, COULTER J P. Investigation of melt manipulation phenomena during injection molding via in situ birefringence observation[J]. Polymer Engineering & Science, 2006, 46(12): 1691-1697.
[9]
CHEN S C, CHEN Y C. Effect of process conditions on birefringence development in injection-molded parts. I. Numerical analysis[J]. Journal of Applied Polymer Science, 1995, 55(13): 1757-1769.
[10]
CHEN S C, CHEN Y C, PENG H S, et al. Simulation of injection-compression molding process. Part 3: effect of process conditions on part birefringence[J]. Advances in Polymer Technology, 2002, 21(3): 177-187.
[11]
WANG T, YOUNG W. Study on residual stresses of thin-walled injection molding[J]. European Polymer Journal, 2005, 41(10): 2511-2517.
[12]
LEE Y B, KWON T H, YOON K. Numerical prediction of residual stresses and birefringence in injection/compression molded center-gated disk. Part Ⅱ: effects of processing conditions[J]. Polymer Engineering & Science, 2002, 42(11): 2273-2292.
[13]
WIMBERGER-FRIEDL R, De BRUIN J G. Birefringence in polycarbonate: molecular orientation induced by cooling stresses. I. Free quenching[J]. Journal of Polymer Science Part B: Polymer Physics, 1993, 31(8): 1041-1049.
