陈振华. 变形镁合金[M]. 北京:化学工业出版社, 2005. CHEN Zhen-hua. Wrought Magnesium Alloy [M]. Beijing: Chemical Industry Press, 2005.
[2]
FATERMI-VARZANEH S M, ZAREI-HANZAK A, BELADI H. Dynamic recrystallization in AZ31 magnesium alloy[J]. Materials Science and Engineering A, 2007, V456:52-57.
[3]
CHEN Q, SHU D Y, ZHAO Z D, et al. Microstructure development and tensile mechanical properties of Mg-Zn-RE-Zr magnesium alloy [J]. Materials & Design, 2012, 40:488-496.
[4]
张丁非, 耿青梅, 杨绪盛, 等. 新型复合挤压工艺中温度对AZ61组织和性能的影响[J]. 材料工程, 2014, (7): 1-4. ZHANG Ding-fei, GENG Qing-mei, YANG Xu-sheng, et al. Effects of temperature in the new compound extrusion on microstructures and properties of AZ61[J]. Journal of Materials Engineering, 2014, (7): 1-4.
[5]
汪清, 王敬丰, 黄崧, 等. 加工工艺对AZ61镁合金拉压不对称性的影响[J]. 材料工程, 2013, (11): 57-61, 88. WANG Qing, WANG Jing-feng, HUANG Song, et al. Effect of machining techniques on tension-compression yield asymmetry of AZ61 magnesium alloy[J]. Journal of Materials Engineering, 2013, (11): 57-61, 88.
[6]
吕滨江, 彭建, 童小山, 等. 挤压温度对Mg-2.0Zn-0.3Zr-0.9Y新型镁合金组织和性能的影响[J].稀有金属材料与工程, 2013, 42(4): 841-844.LV Bin-jiang, PENG Jian, TONG Xiao-shan, et al. Effect of extruding temperature on microstructure and mechanical properties of Mg-2.0Zn-0.3Zr-0.9Y alloy[J]. Rare Metal Materials and Engineering, 2013, 42(4):841-844.
[7]
梁书锦, 王欣, 刘祖岩, 等. AZ31镁合金不同温度挤压后组织性能研究[J]. 稀有金属材料与工程, 2009, 38(7):1276-1279.LIANG Shu-jin, WANG Xin, LIU Zu-yan, et al. Mechanical properties of AZ31 Mg alloy extruded at different die temperature[J]. Rare Metal Materials and Engineering, 2009, 38(7):1276-1279.
[8]
ZHANG B P, GENG L, HUANG L J. Enhanced mechanical properties in fine-grained Mg-1.0Zn-0.5Ca alloys prepared by extrusion at different temperatures [J]. Scripta Materialia, 2010, 63:1024-1027.
[9]
BOHLEN J, LETZIG D, JAUBER K U. Influence of process parameters on the mechanical properties of rolled magnesium ZM21-sheets [J]. Metals and Materials Society, 2007, (5):95-100.
[10]
MEHTEDI M E, BALLONI L, SPIGARELLI S, et al. Hot work ability and constitutive equations of ZM21magnesium alloy [J]. Key Engineering Materials, 2008, 367:79-86.
[11]
SWIOSTEK J, LETZIG D, KAINER K U. Hydrostatic extrusion at 100℃ and its effect on the grain size and mechanical properties of magnesium alloy [J]. Metal Science and Heat Treatment, 2006, 48(11-12):499-503.
[12]
LATWELL D, BARNETT M R. Extrusion limits of magnesium alloys [J]. Metallurgical and Materials Transactions A, 2007, 38(12):3032-3041.
[13]
BARNETT M R, ATWELL D L, BEER A G. Grain size in Mg alloys: recrystallization and mechanical consequences [J]. Materials Science Forum, 2007, V558-559:433-440.
[14]
WANG Y X, FU J W, YANG Y S. Effect of Nd addition on microstructures and mechanical properties of AZ80 magnesium alloys [J].Transactions of Nonferrous Metals Society of China, 2012, 22(6):1322-1328.
[15]
ZHAO Y Z, PAN F S, PENG J, et al. Effect of neodymium on the as-extruded ZK20 magnesium alloy [J]. Journal of Rare Earths, 2010, 28(4):631-635.
[16]
WANG B, GUAN S K, WANG J, et al. Effects of Nd on microstructures and properties of extruded Mg-2Zn-0.46Y-xNd alloys for stent application [J]. Materials Science and Engineering B, 2011, 176(20): 1673-1678.
[17]
钟皓, 张慧, 翁文凭. 热挤压工艺对AZ31镁合金组织与性能的影响[J]. 金属热处理, 2006, 31(8):79-82. ZHONG Hao, ZHANG Hui, WENG WEN-ping, et al. Effect of hot extrusion on microstructure and mechanical properties of AZ31 magnesium alloy [J].Heat Treatment of Metals, 2006, 31(8):79-82.
[18]
陈振华, 夏伟军, 程永奇, 等. 镁合金织构与各向异性[J].中国有色金属学报, 2005, 15(1):1-10. CHEN Zhen-hua, XIA Wei-jun, CHENG Yong-qi, et al. Texture and anisotropy in magnesium alloys [J]. The Chinese Journal of Nonferrous Metals, 2005, 15(1):1-10.
